| LinHES Forums http://forum.linhes.org/ |
|
| No live tv or recording on monitor http://forum.linhes.org/viewtopic.php?f=1&t=1183 |
Page 1 of 2 |
| Author: | ieee1337 [ Mon Apr 12, 2004 8:42 am ] |
| Post subject: | No live tv or recording on monitor |
I installed R4V2 and my 1GHz Athlon system with a PVR-350 and have not been able to get any tv to show live or to record on my system. I've tried a bunch of help from other peoples posts, but haven't been able to get it working. Everything else in MythTV is working except when I go to watch live tv I just get a black screen. --Ryan |
|
| Author: | Dinki [ Mon Apr 12, 2004 9:54 am ] |
| Post subject: | |
Do you have program information in the program guide when you schedule a recording? If I remember correctly, if mythfilldatabase did not run the first time, you would experience the problems you are stating. |
|
| Author: | ieee1337 [ Mon Apr 12, 2004 9:57 am ] |
| Post subject: | |
The database is full. I can schedule recordings and see what's on. I just can't watch it or record it. --Ryan |
|
| Author: | cesman [ Mon Apr 12, 2004 10:23 am ] |
| Post subject: | |
Have you looked in the log? Have you started the frontend from an xterm, tried to watcha recording then quit to see the output? |
|
| Author: | ieee1337 [ Mon Apr 12, 2004 3:28 pm ] |
| Post subject: | |
I get the following errors when I tail the log file ivtv: Timeout waiting for data! error reading from /dev/video0 read: Input/Output error |
|
| Author: | cesman [ Mon Apr 12, 2004 5:32 pm ] |
| Post subject: | |
There is no maigc solution for this as far as I'm aware. I've posted suggestions in the past, change PCI slot, assign IRQ, etc. |
|
| Author: | ieee1337 [ Mon Apr 12, 2004 6:46 pm ] |
| Post subject: | |
Simple question. How should the PVR-350 be set up if it is the only card in PCI slot 1? Will it be /dev/video0 or /dev/video? What should the other settings be? Also Which input should be tied to the channels? Composite 0, Composite 1, Composite 2, Compostie 3, Tuner 0, Composite 4, S-Video 0, S-Video 1, S-Video 2, S-Video 3. I have the calbe tv plugged into the CO-AX input on the TV input on the PVR-350. I'm wondering if I am doing something stupid in the configuration. --Ryan |
|
| Author: | cesman [ Mon Apr 12, 2004 6:57 pm ] |
| Post subject: | |
/dev/video0 and /dev/video are one and the same. Coax is Tuner. You don't have a motherboard w/ a Via chipset do you?! |
|
| Author: | ieee1337 [ Mon Apr 12, 2004 7:21 pm ] |
| Post subject: | |
I do have a VIA chipset in the computer I just moved the tuner card too. |
|
| Author: | ieee1337 [ Mon Apr 12, 2004 7:30 pm ] |
| Post subject: | |
Here is what the mythbackend.log has now: Code: QSettings: error creating /.qt
QSettings::sync: filename is null/empty Unable to connect to database! Driver error was [1/-1]: QMYSQL3: Unable to connect Database error was: Unknown database 'mythconverg' Couldn't open database QSettings::sync: filename is null/empty |
|
| Author: | cesman [ Mon Apr 12, 2004 7:36 pm ] |
| Post subject: | |
Some Via chipsets are problematic w/ ivtv. You however have a greater problem. There is no database... Did you allow the scripts to finish after installing and rebooting? |
|
| Author: | ieee1337 [ Mon Apr 12, 2004 7:39 pm ] |
| Post subject: | |
The mythfilldatabase was stuck downloading the tnn jpeg and sat there for about 10min, but I ctrl+c'ed it and it seemed to conitnue. |
|
| Author: | cesman [ Tue Apr 13, 2004 1:10 am ] |
| Post subject: | |
Does that mean it is working now? |
|
| Author: | ieee1337 [ Tue Apr 13, 2004 5:55 am ] |
| Post subject: | |
Well I reinstalled knoppmyth on my nvdia chipset board and now it seems to be working. But my computer still freezes up. It freezes while recording a show without watching anything. This is the log output. Code: QSettings: error creating /.qt
QSettings::sync: filename is null/empty QSettings: error creating /.qt QSettings::sync: filename is null/empty Also my tv schedule is an hour off. How can this be fixed? --Ryan |
|
| Author: | Xsecrets [ Tue Apr 13, 2004 8:28 am ] |
| Post subject: | |
those errors are not your problem. they are normal. you can change the time by running Knoppmyth-tz as root. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|