Author |
Message |
strick1226
|
Posted: Sat Dec 30, 2006 11:06 am |
|
Joined: Thu Dec 15, 2005 12:20 pm
Posts: 102
|
Hi, Everyone,
I have a working R5D1 system, but really would like to try an R5E50 setup. I've read the pamphlet, and searched the forums, but didn't find anything on this, particularly.
At the moment I'm trying to install R5E50 from scratch onto a single 80GB IDE drive on /hda, with an IDE DVDROM on /hdc .
I'm attempting to set up the partitions like this:
/dev/hda1 / 5GB ext3
/dev/hda2 (swap) 768MB
/dev/hda3 /myth remainder of drive XFS
I've had lots of weird performance blips on the box, so I'd really like to try using XFS for my /myth partition, especially with 3 capture cards in the system. (and a separate frontend)
I used an Ubuntu disk to partition the disk in this setup, but I can't seem to be able to tell the KnoppMyth install to use /dev/hda3 as /myth.
If I "load configuration" as suggested in the pamphlet then the installer tried to load it all onto /dev/hda1.
If I attempt to manually tell it where to install it only gives me the options of /dev/hda1 or /dev/hda3 -- but no apparent choice to separate the /myth partition, so it all goes on one partition yet again.
Am I missing something very basic here?
Thanks in advance!
_________________ R5.5
p4/3.0 GHz
2GB PC3200
Abit IC7-G
3x Seagate 7200.10 SATA (raid1 /, raid5 /myth)
eVGA FX-5500 AGP
3x PVR-150 (model 1045)
MCEUSB2 remote w/Philips USB transceiver
Last edited by strick1226 on Sat Dec 30, 2006 12:45 pm, edited 1 time in total.
|
|
Top |
|
|
strick1226
|
Posted: Sat Dec 30, 2006 11:30 am |
|
Joined: Thu Dec 15, 2005 12:20 pm
Posts: 102
|
OK, after installing to /dev/hda1 and booting off the drive for the first time...
I'm thinking that I need to edit /etc/fstab to automount /dev/hda3 as /myth .
If I do this, how do I set the necessary permissions on the drive so that the mythtv user can create/delete recordings etc... ?
I'm used to changing permissions within Konqueror, perhaps, but I'm not terribly good with chmod...
Thanks in advance!
_________________ R5.5
p4/3.0 GHz
2GB PC3200
Abit IC7-G
3x Seagate 7200.10 SATA (raid1 /, raid5 /myth)
eVGA FX-5500 AGP
3x PVR-150 (model 1045)
MCEUSB2 remote w/Philips USB transceiver
|
|
Top |
|
|
strick1226
|
Posted: Sat Dec 30, 2006 12:27 pm |
|
Joined: Thu Dec 15, 2005 12:20 pm
Posts: 102
|
OK, made a /myth directory on the /dev/hda1 partition. Then set up /etc/fstab for
/dev/hda3 /myth xfs auto,rw,users 0 0
had to get the permissions right, though. I think this worked:
(as root)
chown mythtv /myth
Seems to work!
_________________ R5.5
p4/3.0 GHz
2GB PC3200
Abit IC7-G
3x Seagate 7200.10 SATA (raid1 /, raid5 /myth)
eVGA FX-5500 AGP
3x PVR-150 (model 1045)
MCEUSB2 remote w/Philips USB transceiver
|
|
Top |
|
|
ethernut
|
Posted: Sat Dec 30, 2006 12:32 pm |
|
Joined: Mon Nov 28, 2005 9:05 pm
Posts: 200
|
You done good..
Glad you got it sorted..
_________________ Knoppmyth 7.02 Kernel 2.6.39-LINHES
[MBE] SilverStone LC-10 HTPC Case, Asus M2NPV-VM, AMD X2 4200+, 1G RAM, Nvidia 9500 PCIe, PVR500 and a HD-PVR - Rockin VDPAU
|
|
Top |
|
|
Dale
|
Posted: Sat Dec 30, 2006 1:12 pm |
|
|
Site Admin |
Joined: Fri Oct 31, 2003 11:40 pm
Posts: 357
Location:
Irvine, Ca
|
See the script: /usr/local/bin/mkmythdir on your KnoppMyth box.
|
|
Top |
|
|