| LinHES Forums http://forum.linhes.org/ |
|
| Opened dis read-only SATA http://forum.linhes.org/viewtopic.php?f=1&t=14136 |
Page 1 of 1 |
| Author: | edward4130 [ Sun Feb 11, 2007 11:24 am ] |
| Post subject: | Opened dis read-only SATA |
I'm trying out the Knoppmyth since I coudl not figure out how to get it reloaded after a crash blew out my perfectly good Ubuntu/Mythtv media center. I have two 500GB SATA's both are in full working order if I use them in ubuntu and seen by bios and in fdisk in the Knoppmyth installer. When i attempt to install or partition in the installer I get this error : Opened disk read-only - you have no permission to write Someone help I thought it was weird and I even opened a other linux distro and whiped the disk to free space.. same thing Formatted to ext3... same thing. Anyone have any idea or am I wasting my time with Knoppmyth and SATA, I hoped that this would be much easier, but I have had issues so quickly. Any help is much appreciated . _Edward |
|
| Author: | slowtolearn [ Mon Feb 12, 2007 10:33 am ] |
| Post subject: | |
Sounds like you are cfdisk'ing the wrong device (specifically, the CD-ROM drive) - SATA appears as a SCSI device, what do you get if you Code: cfdisk /dev/sda
|
|
| Author: | karlec [ Fri Mar 23, 2007 9:04 am ] |
| Post subject: | |
I am having the exact same problem on a new install. I have 2 brand new SATA HDs and the primary is a Seagate 250 Gig. They've both been recognized in BIOS posting. I also have this message on the first menu screen and I don't know if there is any correlation: Ivtv: Error -12 on initialization |
|
| Author: | karlec [ Fri Mar 23, 2007 10:00 pm ] |
| Post subject: | |
I formatted the drives using cfdisk manually, to no avail... I am still getting some error message whether I use autoinstall or manual install. Can someone please help? |
|
| Author: | slowtolearn [ Sat Mar 24, 2007 7:32 am ] |
| Post subject: | |
karlec wrote: I formatted the drives using cfdisk manually, to no avail... I am still getting some error message whether I use autoinstall or manual install. Can someone please help? What error message? What steps have you taken, and at what point is the installation failing? Also please provide your hardware specs (motherboard, SATA controller, video, audio, etc.) as well as the version of KnoppMyth you are trying to install.
|
|
| Author: | karlec [ Sun Mar 25, 2007 9:25 am ] |
| Post subject: | |
Well I was able to fix that part and move on. My mistake was that (as I read on someone else's posting) I did not actually select the drive to install to by pressing the spacebar. i guess the install job assumed that I was using hda, my optical drive, and would give me the install message about unable to format hda. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|