LinHES Forums http://forum.linhes.org/ |
|
Install problems http://forum.linhes.org/viewtopic.php?f=1&t=28 |
Page 1 of 1 |
Author: | mbaptista [ Fri Oct 17, 2003 3:38 am ] |
Post subject: | Install problems |
I'm installing Knopmyth from a CD image I've got in mysettopbox.tv My PC is an old P-II 300, with one IDE drive (C:), one SCSI, and a SCSI CD drive. The problem is that when I insert the Knoppmyth CD in the drive and boot from it all goes well until the point when when it reaches "INIT: Entering runlevel: 5" as shown in the picture bellow. Then the PC hangs. There's nothing I can do, except hit the reset button... Anyone knows what's going wrong??? |
Author: | steps [ Fri Oct 17, 2003 4:06 am ] |
Post subject: | |
Hi. How long did you wait for a reaction? Perhaps it's the small RAM-size that makes Knoppix slow. What's your HDD size? What will happen if you change to console 2 (ALT, CTRL, F2)? If you see the prompt here, try to read the XF86.log steps |
Author: | mbaptista [ Fri Oct 17, 2003 10:20 am ] |
Post subject: | |
steps wrote: How long did you wait for a reaction? Half an hour - It's just about enough, don't you think? steps wrote: Perhaps it's the small RAM-size that makes Knoppix slow. What's your HDD size? My RAM size (128Mb) isn't that small. I've got a laptop with 128Mb of RAM running WIN 2000 Pro loaded with software and works great. My HD size is 6Gb IDE (C: ) and 9Gb SCSI. steps wrote: What will happen if you change to console 2 (ALT, CTRL, F2)?
If you see the prompt here, try to read the XF86.log As I said, it hangs in that point. And I mean really hangs! Nothing works, exept for the reset switch... Thanks anyway... Any ideas??? |
Author: | steps [ Mon Oct 27, 2003 9:57 am ] |
Post subject: | |
Hi mbaptista. Sorry for late reply. I had the same effect with a) defective RAM c) HDD with bad blocks So I had both errors in one machine it wasn't easy to find out. Try the "memtest" from SuSE-CD No.1 to check RAM. Perhaps you can use another HDD for check it out. steps |
Author: | cesman [ Mon Oct 27, 2003 7:34 pm ] |
Post subject: | |
Sorry, but even if you resolve your hardware problems, running MythTV on a P II 300 won't be very fruitful. cesman |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |