LinHES Forums
http://forum.linhes.org/

Trying to Upgrade to R5A10 hangs at DHCP IP detection
http://forum.linhes.org/viewtopic.php?f=1&t=3624		 Page 1 of 2
Author:  DFalcon [ Mon Feb 21, 2005 6:09 pm ]
Post subject:  Trying to Upgrade to R5A10 hangs at DHCP IP detection
Hiya guys,

I am trying to upgrade to the newest Knoppmyth and my machine hangs during the boot process at the DHCP IP detection.

Says it found the eth0 properly.

I don't normally run a DHCP server, however, I did put one one my firewall. No luck with or without.

Keyboard no longer functions either - numlock doesn't go on/off....maybe just a bad burn?

Dfalcon
Author:  douglaing [ Tue Feb 22, 2005 11:20 am ]
Post subject:  Found a simular problem
I found that every time I reboot it gets another IP from the DHCP pool. As I have my DHCP pool set at 30 max on my LinkSys router and 3/4 are used it runs out of IP's quick when you reboot many times trying things and testing.

Not shure if its a problem in the LinkSys or R5A10 but the windows XP PC's seem to be fine.
Author:  ceenvee703 [ Tue Feb 22, 2005 11:29 am ]
Post subject: 
Dfalcon: do you have on-board Firewire?
Author:  DFalcon [ Tue Feb 22, 2005 7:13 pm ]
Post subject: 
Firewire - Nope....no onboard firewre - nor do I have a Firewire card in the machine.

I used to be able to get past this point and put in my static IP 0 192.168...etc

DFalcon
Author:  DFalcon [ Thu Feb 24, 2005 9:12 pm ]
Post subject: 
Surely I can't be the only one having this problem?

I have burned multiple disks, so it is not just a bad burn.

They all hang during "found eth0 - broadcasting for DHCP IP."

No keyboard response after that. I have left the machine for 20 mins with no change.

Everyone else can install just fine? Can anyone help me?

DFalcon
Author:  cesman [ Thu Feb 24, 2005 9:33 pm ]
Post subject: 
Hardware details, hardware details, hardware details.... Try booting with knoppix alsa noacpi.
Author:  DFalcon [ Fri Feb 25, 2005 8:44 pm ]
Post subject: 
Using a Netgear 10/100 Nic that uses the tulip driver.

My existing Mythtv interrupts looks like this:

CPU0
0: 8421883 XT-PIC timer
1: 6 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 5045617 XT-PIC EMU10K1, nvidia
8: 1 XT-PIC rtc
9: 0 XT-PIC ivtv: iTVC15/16 mpg2 encoder chip
11: 7818 XT-PIC usb-uhci, usb-uhci, eth0
12: 38 XT-PIC PS/2 Mouse
14: 116173 XT-PIC ide0
NMI: 0
ERR: 1

ioports looks like this:

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(set)
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : ledxmit_serial
0cf8-0cff : PCI conf1
b000-b07f : Digital Equipment Corporation DECchip 21140 [FasterNet]
b000-b07f : tulip
b400-b407 : Creative Labs SB Live! MIDI/Game Port
b400-b407 : emu10k1-gp
b800-b81f : Creative Labs SB Live! EMU10k1
b800-b81f : EMU10K1
d000-d01f : VIA Technologies, Inc. USB (#2)
d000-d01f : usb-uhci
d400-d41f : VIA Technologies, Inc. USB
d400-d41f : usb-uhci
d800-d80f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
d800-d807 : ide0
d808-d80f : ide1
e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]


Problem sharing irq 11? Worked with previous version of my myth install (obviously). Maybe if I disabled the USB stuff in my bios? Did something change with the modules in this new version?

DFalcon
Author:  Xsecrets [ Fri Feb 25, 2005 11:19 pm ]
Post subject: 
lots of things changed with the modules in the new version. to start with they are all for 2.6 kernel instead of the 2.4 that the old version had.
Author:  DFalcon [ Fri Feb 25, 2005 11:46 pm ]
Post subject: 
I c. So this is a significant change. I will try a number of different hardware changes then. It doesn't like my old setup.

I will let you know what I find out.

DFalcon
Author:  DFalcon [ Sat Feb 26, 2005 10:44 am ]
Post subject: 
Wow....are there a lot of changes.

I got the upgrade to run by changing to a different ethernet card (old one was a Netgear FA310TX).

However....now mythweb is in a different spot (you need to go to http://yourhost/mythweb now)

The mythtv-setup is now a GUI app that can only be run from the X server - so you can't ssh in and make those changes.

Also....my PVR-250 no longer works. To be specific, when I pick it from the menu of card choices (in the mythtv-setup), it will not let me choose any other option except Television as the input. I have my Sat hooked up to the S-VHS input. Then if you go to video inputs, it dies with a seg fault.

Since I have now royally screwed up my system anyway, I am going to try a fresh install and see if that makes a difference.

DFalcon
Author:  Xsecrets [ Sat Feb 26, 2005 11:31 am ]
Post subject: 
yes mythweb moved.

The pvr issue is discussed in the install instructions for the alpha, you have to put ivtv in the /etc/modules

mythtv-setup has always been a gui application that had to be run from xterm.
Author:  DFalcon [ Sat Feb 26, 2005 10:04 pm ]
Post subject: 
Yup...my mistake about mythtv-setup - it has always been a gui...I gotta stop with the drugs ;-)

I got everything working back again. Had to do the modules thing to get my PVR-250 working (I adjust the KnoppmythWiki to reflect the required changes as I had trouble finding them).

I got Samba working fairly painlessly, but the video dir seemed to move. I could swear it used to be /myth/video and is now /var/lib/mythtv - so I just made a link.

I also had some trouble getting my serial IR transmitter working again, but eventually, after re-compiling the kernel to get the needed .h files (didn't actually have to install the kernel), and then recompling a 2nd LIRC as described in http://losdos.dyndns.org:8080/public/my ... _LIRC.html

I got it all back to working. Now...to test the reason I did all this - the supposedly new and improved commercial skip detection.

Thanks for your suggestions and help.

DFalcon
Author:  Xsecrets [ Sun Feb 27, 2005 12:55 am ]
Post subject: 
yeah that's one of my big reasons for moving to 0.17 as well, and so far I'm not impressed, but only tested a few shows.
Author:  mbourgon [ Tue May 24, 2005 5:12 pm ]
Post subject:  Having the same issue - hangs on "Broadcasting DHCP&quo
I've tried it both with and without a DHCP server. I can boot using knoppix (not knoppixmyth, just knoppix) 3.7, but I get the same problem with 3.8 as with KnoppMyth

Hardware details
Athlon 1.4
IWill kk266+R
484mb of ram
Monster MX300 (Aureal, so knoppix doesn't like it)
Ati All In Wonder PCI (16mb)
ATI TV Wonder (bt878)
NIC: Kingston KNE100TX (does work with Knoppix 3.7)

Should I try installing Knoppix 3.7 to the HD, dist-upgrade, then install mythtv? Thanks
Author:  cesman [ Tue May 24, 2005 7:10 pm ]
Post subject: 
What exactly are you reporting? That you cannot get an IP from your DHCP server? It is probably a DHCP server that doesn't follow the specs to well. If the live CD doesn't work, what makes you think installing to hard drive would work? Try dhclient, if that does work, try pump. Google is your friend, drivers do exist for the Aureal.

Regards,
Page 1 of 2 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/