Too many times
.
| LinHES Forums http://forum.linhes.org/ |
|
| Hauppauge PVR-250 Black Remote Issue http://forum.linhes.org/viewtopic.php?f=1&t=445 |
Page 1 of 1 |
| Author: | jesse [ Fri Jan 09, 2004 8:34 pm ] |
| Post subject: | Hauppauge PVR-250 Black Remote Issue |
I have a PVR-250 Black Remote. I could not get it to work. I started irw and press the buttons on the remote and nothing shows up. Do anyone have any suggestions? Thanks. |
|
| Author: | cesman [ Fri Jan 09, 2004 8:37 pm ] |
| Post subject: | |
Perhaps a search of the forum... |
|
| Author: | Xsecrets [ Fri Jan 09, 2004 9:22 pm ] |
| Post subject: | |
yes there is a long thread on howto get the black remote working. |
|
| Author: | jesse [ Fri Jan 09, 2004 11:38 pm ] |
| Post subject: | Sorry |
Sorry, I forgot to mention that I already have. http://mysettopbox.tv/phpBB2/viewtopic.php?t=413 This person seemed to get hex values with irw. http://mysettopbox.tv/phpBB2/viewtopic.php?t=180 The file (/usr/local/lib/ivtv/utils/lircrc.conf) doesn't exist but exists as (/usr/local/lib/ivtv/utils/lircrc) in the R4 release (at least mine). So it should read: cp /usr/local/lib/ivtv/utils/lircrc /etc/lircrc.conf However, the lircrc configuration seems immaterial as irw doesn't recognize the remote. I did the Automatic install with the 686 binaries. BTW: Thank you Cecil for making this. It really helps out! |
|
| Author: | cesman [ Sat Jan 10, 2004 12:07 am ] |
| Post subject: | |
You're welcome. The file that you need to copy over isn't lircrc but lircd.conf. For more details, take a look at the README in utils. |
|
| Author: | Xsecrets [ Sat Jan 10, 2004 12:39 am ] |
| Post subject: | |
yes if you copied an lircrc file in there you definately won't be working properly. |
|
| Author: | jesse [ Sat Jan 10, 2004 11:00 am ] |
| Post subject: | Reinstall |
I completely reinstalled the machine with the 686 binaries. I used http://lirc.sourceforge.net/remotes/hauppauge/lircd.conf.hauppauge.irman as my lircd.conf. I am still not getting any remote feedback from MythTV or irw. Do you have any other suggestions? |
|
| Author: | Xsecrets [ Sat Jan 10, 2004 12:04 pm ] |
| Post subject: | |
did you either reboot or restart lircd after you changed the /etc/lircd.conf file? as root do /etc/init.d/lircd restart |
|
| Author: | jesse [ Sat Jan 10, 2004 1:28 pm ] |
| Post subject: | Reboot? |
Too many times .
|
|
| Author: | jdl [ Sat Jan 10, 2004 2:24 pm ] |
| Post subject: | |
I think the .irman extension from the lirc.org is only for use with IRMAN receivers. Assuming you dont have an IRMAN receiver but rather using the receiver that comes wiht the card, you'll want to try the non-irman file: http://lirc.sourceforge.net/remotes/hauppauge/lircd.conf.hauppauge |
|
| Author: | jesse [ Sat Jan 10, 2004 2:44 pm ] |
| Post subject: | Fixed! |
That was the problem. Thanks for all your help. Now onto transcoding, dual PVR-250's, and software raids  .
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|