| LinHES Forums http://forum.linhes.org/ |
|
| Illegal instruction from mplayer... http://forum.linhes.org/viewtopic.php?f=1&t=969 |
Page 1 of 1 |
| Author: | jpummill2 [ Thu Mar 11, 2004 1:31 pm ] |
| Post subject: | Illegal instruction from mplayer... |
Hi All, I have ftp'd two .mpg, and one .avi file to /myth/video and tried to play them using knoppmyth with no result. I looked in setup to find the command line args used for playing video with mplayer and decided to test it from the command line with the following results... ---------------------------------------------------------------------------- Running the following command: /usr/local/bin/mplayer -fs -zoom -quiet -vo xv /myth/video/bluewaves.mpg Gives the following message: MPlayer 0.92-3.3.2 (C) 2000-2003 MPlayer Team CPU: Intel Celeron Covington/Pentium II Deschutes,Tonga/Pentium II Xeon (Family: 6, Stepping: 2) Detected cache-line size is 32 bytes CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /home/mythtv/.mplayer/config Illegal instruction ---------------------------------------------------------------------------- If I just run mplayer without options: /usr/local/bin/mplayer /myth/video/bluewaves.mpg I get the following: MPlayer 0.92-3.3.2 (C) 2000-2003 MPlayer Team CPU: Intel Celeron Covington/Pentium II Deschutes,Tonga/Pentium II Xeon (Family: 6, Stepping: 2) Detected cache-line size is 32 bytes CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /home/mythtv/.mplayer/config Reading /home/mythtv/.mplayer/codecs.conf: can't open '/home/mythtv/.mplayer/codecs.conf': No such file or directory Reading /usr/local/etc/mplayer/codecs.conf: can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf Illegal instruction ---------------------------------------------------------------------------- Anyone seen this before, any help would be appreciated. jpummill My system is as follows, ASUS-P2B-DS Motherboard with 2 PII-400 CPU's Matrox 32MB G400 Video Card Diamond mx300 Sound Card (aureal2) Knoppmyth R4.2 |
|
| Author: | Xsecrets [ Thu Mar 11, 2004 2:06 pm ] |
| Post subject: | |
first guess would be that you installed for i686, and you needed to install for i586. |
|
| Author: | jpummill2 [ Thu Mar 11, 2004 4:04 pm ] |
| Post subject: | |
doesn't a Pentium2 processor constitute i686. I thought that the old Pentium processor was considered i586.... |
|
| Author: | Grooby [ Thu Mar 11, 2004 4:15 pm ] |
| Post subject: | |
I was having trouble with mplayer giving the "illegal instruction" and what I end up doing is recompile the mplayer that came with knoppmyth. If you look at the bottom of the installation instruction, you'll see where the source files are located. Less the README (i think it was readme) for how to compile and install it. |
|
| Author: | Xsecrets [ Thu Mar 11, 2004 4:44 pm ] |
| Post subject: | |
If you'll look at that log output you posted you'll notice that your processor only has mmx and nothing else, however the mplayer you are trying to use was compiled with mmx mmx2 sse 3dnow etc. |
|
| Author: | cesman [ Thu Mar 11, 2004 5:27 pm ] |
| Post subject: | |
From the documentation Quote: MPlayer: Compiled on an Athlon XP, recompile for different architecture or if you require additional features. Source is in /home/mythtv/r4v2_src"
|
|
| Author: | jpummill2 [ Fri Mar 12, 2004 10:22 am ] |
| Post subject: | |
ok, sorry for wasting everyone's time on this one. I just assumed that even though it was compiled on an AthlonXP, you guys would have still used a default of i586 or i686 for the compile flag. I will recompile it. (should I recompile everything???) Thanks again for the help by they way!!! jpummill |
|
| Author: | Grooby [ Fri Mar 12, 2004 10:42 am ] |
| Post subject: | |
just recompile the MPlayer-0.90rc5-patched.tar.bz2 (unzip and untar it) then follow the README in the Mplayer directory on how to configure, compile, and install.. |
|
| Author: | cesman [ Fri Mar 12, 2004 11:02 am ] |
| Post subject: | |
You don't need to recompile everything, just MPlayer. |
|
| Author: | Xsecrets [ Fri Mar 12, 2004 12:52 pm ] |
| Post subject: | |
shouldn't he be able to just use the i586 packages and not even have to recompile? or did you ditch the 586 packages? |
|
| Author: | cesman [ Fri Mar 12, 2004 1:00 pm ] |
| Post subject: | |
The i586 package is only for MythTV. The reason, I didn't compile MPlayer for generic x86 was because I hobbled it and figured folks would recompile it to get additional features cough cough. |
|
| Author: | Xsecrets [ Fri Mar 12, 2004 1:02 pm ] |
| Post subject: | |
ahhh oh well I never have had any need to recompile it. Even in it's hobbled form it does everything I need. |
|
| Author: | Jammy [ Fri Mar 12, 2004 3:00 pm ] |
| Post subject: | |
cesman wrote: The i586 package is only for MythTV. The reason, I didn't compile MPlayer for generic x86 was because I hobbled it and figured folks would recompile it to get additional features cough cough.
I have the same problem with my Althlon900.. Illegal instruction.. I'd been playing with Xine, but maybe i'll go recompile mplayer to see if it looks any better. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|