View unanswered posts    View active topics

Board index KnoppMyth Usage/HowTo

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
techman83
PostPosted: Thu Apr 26, 2007 11:34 am 
Offline
Joined: Tue Aug 22, 2006 9:11 am
Posts: 127
Location: Perth
Dunno if I'm just tired and screwed up my X11 conf file, but I can't get X to start properly now!

Managed to install the drivers correctly, which is at least a step forward compared to my last attempt :) (helps to read instructions properly :P )

This is the specific error, have searched but have not uncovered my answer yet:
mythbox init: Id "c7" respawning too fast: disabled for 5 minutes

No errors in the Xorg.0.log file

My xorg.conf:

Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Feb 26 23:38:46 PST 2007

# Auto-generated by KNOPPIX mkxf86config

Section "ServerLayout"

# PS/2 Mouse not detected
# USB Mouse not detected
    Identifier     "XFree86 Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Serial Mouse" "CorePointer"
EndSection

Section "Files"

# Additional fonts: Locale, Gimp, TTF...
#       FontPath     "/usr/share/fonts/X11/latin2/75dpi"
#       FontPath     "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    RgbPath         "/usr/share/X11/rgb"
    ModulePath      "/usr/lib/xorg/modules"
    FontPath        "/usr/share/fonts/X11/misc:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi:unscaled"
    FontPath        "/usr/share/fonts/X11/100dpi:unscaled"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/X11/Speedo"
    FontPath        "/usr/share/fonts/X11/PEX"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath        "/usr/share/fonts/truetype"
    FontPath        "/usr/share/fonts/latex-ttf-fonts"
EndSection

Section "Module"

# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
#       Load  "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it.
#       Load  "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
#       Load  "ddc"  # ddc probing of monitor, this should be never present, as it gets automatically loaded.
#       Load  "GLcore" # This should be never present, as it gets automatically loaded.
#       Load  "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice.
    Load           "dbe" # Double Buffering Extension, very important.
    Load           "glx" # GLX Extension.
    Load           "freetype" # Freetype fonts.
    Load           "type1"  # Type 1 fonts
    Load           "record" # Developer extension, usually not needed
    SubSection     "extmod"
        Option         "omit xfree86-dga"
    EndSubSection
EndSection

Section "ServerFlags"
Option         "AllowMouseOpenFail" "true"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" ""
EndSection

Section "InputDevice"
    Identifier     "Serial Mouse"
    Driver         "mouse"
    Option         "Protocol" "Microsoft"
    Option         "Device" "/dev/ttyS0"
    Option         "Emulate3Buttons" "true"
    Option         "Emulate3Timeout" "70"
    Option         "SendCoreEvents" "true"
EndSection

Section "InputDevice"
    Identifier     "PS/2 Mouse"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "ZAxisMapping" "4 5"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "true"
    Option         "Emulate3Timeout" "70"
    Option         "SendCoreEvents" "true"
EndSection

Section "InputDevice"
    Identifier     "USB Mouse"
    Driver         "mouse"
    Option         "Device" "/dev/input/mice"
    Option         "SendCoreEvents" "true"
    Option         "Protocol" "IMPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Buttons" "5"
EndSection

Section "Monitor"

 # DDC-probed
 # DDC-probed
        # These are the DDC-probed settings reported by your monitor.
        # 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
    Identifier     "Monitor0"
    VendorName     "HWP"
    ModelName      "HWP2603"
    HorizSync       30.0 - 50.0
    VertRefresh     60.0
    ModeLine       "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine       "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine       "800x600" 56.2 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine       "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine       "800x600" 56.2 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine       "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine       "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine       "640x480" 25.2 640 648 744 784 480 482 484 509 -hsync -vsync
    ModeLine       "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine       "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine       "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine       "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine       "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine       "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine       "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine       "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine       "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine       "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine       "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine       "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine       "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine       "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine       "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine       "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine       "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine       "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine       "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine       "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine       "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    ModeLine       "1920x1200" 193.2 1920 2048 2256 2592 1200 1201 1204 1242 +hsync -hsync
    Option         "DPMS" "true"
EndSection

Section "Device"

# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
# The following line is auto-generated by KNOPPIX mkxf86config
#       BusID       "PCI:1:0:0"
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "All"
    BoardName      "All"
EndSection

Section "Screen"

        # DefaultColorDepth 16
#    SubSection     "Display"
#        Modes      "1024x768" "800x600" "640x480"
#    EndSubSection
#    SubSection     "Display"
#    EndSubSection
#    SubSection     "Display"
#        Depth       4
#        Modes      "1024x768" "800x600" "640x480"
#    EndSubSection
#    SubSection     "Display"
#        Depth       8
#        Modes      "1024x768" "800x600" "640x480"
#    EndSubSection
#    SubSection     "Display"
#        Depth       15
#        Modes      "1024x768" "800x600" "640x480"
#    EndSubSection
#    SubSection     "Display"
#        Depth       16
#        Modes      "1024x768" "800x600" "640x480"
#    EndSubSection
#    SubSection     "Display"
#       Depth       32
#        Modes      "1024x768" "800x600" "640x480"
#    EndSubSection
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TVStandard" "PAL"
    Option         "TVOutFormat" "SVIDEO"
    Option         "TVOverScan" "0.5"
    Option         "RenderAccel" "1"
        ### Available Driver options are:-
    Option         "AllowGLXWithComposite" "True"
    Option         "XvmcUsesTextures" "True"
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       24
        Modes      "800x600" "800x600" "640x480"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection


Any help or a point in the right direction would be much appreciated.

_________________
DRM 'manages access' in the same way that jail 'manages freedom.'
_________________
Intel P4 2.6
Intel Desktop Board
2GB DDR400
nVidia 6600GT
Dvico HDTV+
Dvico Dual 4
200GB WD for Swap /boot & /
2x 500GB WD with LVM & XFS for /myth/tv
Top
 Profile  
 
neutron68
 Post subject: got the same message
PostPosted: Thu Apr 26, 2007 3:31 pm 
Offline
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location: Minneapolis, MN
I got the same message during my nvida upgrade process in R5E50.

I was following this thread:
http://mysettopbox.tv/phpBB2/viewtopic. ... highlight=
and after the nvidia driver scirpt finished and I rebooted, I started getting the "INIT: id "c7" respawning too fast: disabled for 5 minutes. " message. I was so scared that I had hosed my system up.

In a panic, I went back to the thread and found my solution near the bottom of page 1.
MrFahrenheit posted that he had to run the following commands:

update-rc.d -f install-nvidia-debian remove
update-rc.d -f nvidia-glx remove
update-rc.d -f nvidia-kernel remove

and then re-run the nvidia driver script.

After a reboot, all worked.

I hope it works for you too!

_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
Top
 Profile  
 
techman83
 Post subject:
PostPosted: Thu Apr 26, 2007 6:36 pm 
Offline
Joined: Tue Aug 22, 2006 9:11 am
Posts: 127
Location: Perth
Fantastic, Exactly the issue I am getting :-)

I will try this tonight when I get home. Thankyou very much!!

(I also missed that post when going through all the info :oops: )

_________________
DRM 'manages access' in the same way that jail 'manages freedom.'
_________________
Intel P4 2.6
Intel Desktop Board
2GB DDR400
nVidia 6600GT
Dvico HDTV+
Dvico Dual 4
200GB WD for Swap /boot & /
2x 500GB WD with LVM & XFS for /myth/tv
Top
 Profile  
 
techman83
 Post subject:
PostPosted: Fri Apr 27, 2007 5:01 am 
Offline
Joined: Tue Aug 22, 2006 9:11 am
Posts: 127
Location: Perth
Unfortunately I am still getting the same problem. I'm pretty sure I have screwed up my Xorg.conf file. Even though I backed it up, i think it all got lost in the translation and I may have overwritten the backup :(

_________________
DRM 'manages access' in the same way that jail 'manages freedom.'
_________________
Intel P4 2.6
Intel Desktop Board
2GB DDR400
nVidia 6600GT
Dvico HDTV+
Dvico Dual 4
200GB WD for Swap /boot & /
2x 500GB WD with LVM & XFS for /myth/tv
Top
 Profile  
 
manicmike
 Post subject:
PostPosted: Fri Apr 27, 2007 7:36 am 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
techman83 wrote:
Unfortunately I am still getting the same problem. I'm pretty sure I have screwed up my Xorg.conf file. Even though I backed it up, i think it all got lost in the translation and I may have overwritten the backup :(


Try 'sudo dpkg-reconfigure xserver-xorg' to create a new one. It's what I'd do.

Mike

_________________
*********************
LinHES 7.4
Australian Dragon
*********************
Top
 Profile  
 
techman83
 Post subject:
PostPosted: Fri Apr 27, 2007 11:13 am 
Offline
Joined: Tue Aug 22, 2006 9:11 am
Posts: 127
Location: Perth
Thanks, Still no go unfortunately. Back to the drawing bored I guess. :(

_________________
DRM 'manages access' in the same way that jail 'manages freedom.'
_________________
Intel P4 2.6
Intel Desktop Board
2GB DDR400
nVidia 6600GT
Dvico HDTV+
Dvico Dual 4
200GB WD for Swap /boot & /
2x 500GB WD with LVM & XFS for /myth/tv
Top
 Profile  
 
manicmike
 Post subject:
PostPosted: Fri Apr 27, 2007 7:24 pm 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
techman83 wrote:
Thanks, Still no go unfortunately. Back to the drawing bored I guess. :(


OK. What video card do you have, and what monitor do you have?

Mike

_________________
*********************
LinHES 7.4
Australian Dragon
*********************
Top
 Profile  
 
techman83
 Post subject:
PostPosted: Fri Apr 27, 2007 10:37 pm 
Offline
Joined: Tue Aug 22, 2006 9:11 am
Posts: 127
Location: Perth
GeForce FX 5500 and Using a Television. But have tried plugging it into a 17" HP 7500

_________________
DRM 'manages access' in the same way that jail 'manages freedom.'
_________________
Intel P4 2.6
Intel Desktop Board
2GB DDR400
nVidia 6600GT
Dvico HDTV+
Dvico Dual 4
200GB WD for Swap /boot & /
2x 500GB WD with LVM & XFS for /myth/tv
Top
 Profile  
 
manicmike
 Post subject:
PostPosted: Fri Apr 27, 2007 11:10 pm 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
techman83 wrote:
GeForce FX 5500 and Using a Television. But have tried plugging it into a 17" HP 7500


I have a machine with an FX5500 and will pm you the entire xorg.conf now.

Mike

_________________
*********************
LinHES 7.4
Australian Dragon
*********************
Top
 Profile  
 
techman83
 Post subject:
PostPosted: Fri Apr 27, 2007 11:53 pm 
Offline
Joined: Tue Aug 22, 2006 9:11 am
Posts: 127
Location: Perth
manicmike wrote:
techman83 wrote:
GeForce FX 5500 and Using a Television. But have tried plugging it into a 17" HP 7500


I have a machine with an FX5500 and will pm you the entire xorg.conf now.

Mike


Thankyou very much Mike! :)

I managed, about 5 minutes before your post to get that working, but it is much appreciated all the same!

Several problems, including a PEBKAC error!

I did a search for the nvidia modules, weren't loaded. So "modprobe nvidia" then the devices weren't present. running nvidia-kernel solved that. Still couldn't start X... Some idiot forgot to rename startx.save back to startx!

So renamed startx, added nvidia to /etc/modules and hey presto, back up and running! Even better then before!

Thanks once again for all contributions!

_________________
DRM 'manages access' in the same way that jail 'manages freedom.'
_________________
Intel P4 2.6
Intel Desktop Board
2GB DDR400
nVidia 6600GT
Dvico HDTV+
Dvico Dual 4
200GB WD for Swap /boot & /
2x 500GB WD with LVM & XFS for /myth/tv
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 


Board index KnoppMyth Usage/HowTo

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu