LinHES Forums http://forum.linhes.org/ |
|
Changing resolution after recording? Mythburn failed http://forum.linhes.org/viewtopic.php?f=11&t=11881 |
Page 1 of 1 |
Author: | Marc.Rudolph [ Thu Sep 28, 2006 1:52 pm ] |
Post subject: | Changing resolution after recording? Mythburn failed |
Hi! I have a small issue (hopefully ) while burning DVDs: It never works with recorded files since I've changed the default recording-resolution to 720x576. With 480x480 (the original default after installation) it nver worked. Now - with the higher resolution all new recordings I can burn perfect to DVD. But now - what can I do with the old recordings? I've tried to transcode - but I had several times error-messages. What else can I do? THANKS! Marc The system: Knoppmyth R5C7, PVR 350, P4 2,4GHz, 512 MB-RAM, 220 GB HD myhtburn.log: Code: MythBurn Script is running as user www-data Video format = pal Background image = /myth/mythburn/images/backgrounds/grey.png Background music = /myth/mythburn/music/silence.mp2 Make ISO image = no Burn to DVD-R = yes Delete VIDEO_TS = yes Highlight image = bar.png Animated thumbnails = no Chapter Submenus = yes Recode to AC3 = no MythTV files are in /myth/tv Creating DVD at 28-09-2006 16:13.... Total file size of video files is 5971 Mbytes *************************************************************** ****** WARNING - DVD may not fit onto a recordable DVD ****** ****** Requantizing with factor 1.388605 to fit onto DVD ****** *************************************************************** mkdir: cannot create directory `/myth/mythburn/temp/DVD': File exists Multiplexing MPEG2 video files to DVD format and applying cutlists ----- datestamp=28-09-2006 16:13 ----- datestamp=28-09-2006 16:13 1051_20060905214200.nuv commerical cut disabled, remultiplexing for DVD format only Re-multiplexing file /myth/tv/1051_20060905214200.nuv Reading GUI-Switch... Reading Help Switch... Reading Config File Switch... Start without GUI... Loading last Config or Standard File... ini load error: java.io.FileNotFoundException: /myth/mythburn/temp/X.ini (No such file or directory) Loading Language -> 'en' ProjectX 0.90.3.01/31.01.2006 TEST PROJECT ONLY , User: www-data TERMS AND CONDITIONS: (1) this is a free Java based demux utility. (2) It is intended for educational purposes only, as a non-commercial test project. (3) released under the terms of the GNU GPL. (4) there is NO WARRANTY of any kind attached to this software. (5) use it at your own risk and for your own education. Java Environment September 28, 2006 4:13:51 PM UTC java.version 1.5.0_06 java.vendor Sun Microsystems Inc. java.home /usr/lib/j2re1.5-sun java.vm.version 1.5.0_06-b05 java.vm.vendor Sun Microsystems Inc. java.vm.name Java HotSpot(TM) Client VM java.class.vers 49.0 java.class.path /usr/share/projectx/ProjectX.jar os.name Linux os.arch i386 os.version 2.6.15-chw-2 ini.file /myth/mythburn/temp/X.ini ext.disk.access disabled or library not found user.language en user.name www-data user.home /var/www quick CL usage: Note: CL doesn't load the GUI components, except with switch [-gui] <without options> ...starts the GUI switches and inputfiles can be in any order options: [-ini <path + inifile>] ..use that specified iniFile instead of the standard [-dvx1] ..create a .d2v ProjectFile on demux [-dvx2] ..create a .d2v ProjectFile + .ac3.wav (RIFF WAVE Header) [-dvx3] ..create a .d2v ProjectFile + .mpa.wav (RIFF WAVE Header) [-dvx4] ..create a .d2v ProjectFile + .ac3.wav + mpa.wav (RIFF WAVE Header) [-out <path>] ..use that specified directory for output [-name <filename>] ..use that specified filename for output [-cut <file>] ..use that text based file as cutpoint list [-chp <file>] ..use that text based file as chapterpoint list [-id <tokens>] ..use only these (P)IDs, separated by comma "," [-gui] ..display the GUI using all given CLI options [-log] ..write the normal logfile [-saveini] ..save changes made bei CLI in active .ini [-split <xxx>] ..split output at xxx MB [-demux, -tom2p, -topva, -tovdr, -tots, -filter] ..action types Loading Basic Classes... Reading CLI Switches... Checking Commons-Net library access... Loading AC3 frames... Starting Collection Process... preparing collection(s)... 1 %<<< session infos >>> Thursday, September 28, 2006 4:13:52 PM UTC ProjectX 0.90.3.01 (31.01.2006) -> working with collection 0 -> save normal log file -> write all video data -> write all other data -> patch c.d.flagged infos of pictures -> add sequence end code -> set resolution in SDE -> PVA: strictly specs. for audio streams -> VOB: determine diff. Cell timelines -> TS: ignore scrambled packets -> TS: enhanced search for open packets -> TS: join file segments (of Dreambox?) -> TS: generate PMT stream dependent -> get only enclosed PES/TS packets -> concatenate different recordings -> ensure 1st PES-packet start with video -> generate PCR/SCR from PTS -> write output files to: '.' -> Input File 0: '/myth/tv/1051_20060905214200.nuv' (6,254,513,701 bytes) -> Filetype is ES (MPEG Video) analyze video stream file 1051_20060905214200.nuv -> skip sequence_end_code following GOP# 0 @ 1870588 !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 16721) !> wrong frametype 7, tref 599 !> wrong frametype 5, tref 49 !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 111388) !> wrong frametype 0, tref 26 !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 144806) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 163820) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 169369) !> wrong frametype 5, tref 1008 !> wrong frametype 6, tref 828 !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 300383) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 356651) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 420479) !> wrong frametype 5, tref 33 !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 502291) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 505143) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 550731) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 581430) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 602938) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 635624) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 648458) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 681073) !> wrong frametype 5, tref 953 !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 702825) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 748399) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 781071) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 781578) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 837323) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 851321) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 868006) !> wrong frametype 5, tref 0 !> wrong frametype 6, tref 1016 !> wrong frametype 5, tref 1020 !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 1038029) !> GOP# 0, PES_header found in ES, filled with zero... (GOP offs. 1092264) !> wrong frametype 5, tref 33 --------------------------snipped ----- (a lot of messages like this between) GOP# 4819, new format in next leading sequenceheader detected: (00:00:00.283) -> video basics: 1102*3586 @ 60fps @ 1.0255 @ 101171200bps, vbvBuffer 64 -> skip sequence_end_code following GOP# 4820 @ 6240288893 GOP# 4823, new format in next leading sequenceheader detected: (00:00:00.283) -> video basics: 3344*345 @ 25fps @ 0.8437 @ 736000bps, vbvBuffer 67 -> skip sequence_end_code following GOP# 4824 @ 6243062591 -> skip sequence_end_code following GOP# 4825 @ 6245555992 101 %GOP# 4829, new format in next leading sequenceheader detected: (00:00:00.680) -> video basics: 509*57 @ 25fps @ 0.7031 (16:9) @ 225200bps, vbvBuffer 574 -> Video: fr/ ct/ 1p/ cg/ og/ dg -> 17/ 465/ 4830/ 2/ 0/ 6627 -> Video length: 17 frames @ 00:00:00.560 -> GOP summary: min. 2, max. 2 fields; contains progressive frames -> avg. nom. bitrate 19292370bps (min/max: 4920400/53069200) -> set first sequenceheader bitrate to 9000000bps ---> new File: ./1051_20060905214200.new.m2v summary of created media files: .Video (m2v): 17 Frames 00:00:00.560 './1051_20060905214200.new.m2v' => 1,355,289 bytes written... -> we have 130827 warnings/errors. done... 1 collection(s) processed @ 00:07:10.740 Requantizing with factor 1.388605 to fit onto DVD /usr/local/bin/tcrequant -i 1051_20060905214200.m2v.big -o 1051_20060905214200.m2v -d 2 -f 1.388605 [tcrequant] MPEG2 Requantiser by Makira. [tcrequant] Using 1.388605 as factor. mplex -o /myth/mythburn/temp/1051_20060905214200.nuv -f 8 1051_20060905214200.m2v *********************************** MythTV BurnDVD stopped due to error *********************************** Sent UDP/XML packet to IP 255.255.255.255 and port: 6948 ![]() ![]() |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |