LinHES Forums http://forum.linhes.org/ |
|
HOWTO: ACPI Wakeup w/ Mythwelcome on R5.5 http://forum.linhes.org/viewtopic.php?f=11&t=18605 |
Page 3 of 3 |
Author: | TVBox [ Tue Jun 15, 2010 2:19 pm ] |
Post subject: | |
Host Address on 6.03 machine appears fine to me Local backend ip address 127.0.0.1 Port 6544 Master backend ip address 127.0.0.1 Port 6544 On checking my 5.5 master Back end I did find an old entry in my /etc/host file. 192.168.1.41 BE1 That I just now commented out. rebooted everything and ran /usr/LH/bin/mythwelcome-config.py as mythtv user and it worked this time. Backend Wakup time format: yyyy-MM-ddThh:mm:ss Command to set time: /usr/bin/mythshutdown --setwakup $time Server halt command: /usr/bin/mythshutdown --shutdown Pre shutdown check-command: /usr/bin/mythshutdown --check front end Command to set wakeup Time: sudo sh -c "/usr/LH/bin?mythwelcome-set-alarm.sh $time" Wakeup time format: time_t nvram-wakeup Restart Command: (blank) Command to reboot: sudo /sbin/reboot Command to shutdown: sudo /sbin/poweroff Command to run Xterm: xterm Command to run to start frontend: /usr/LH/bin/mythfrontend-start /home/mythtv/.fluxbox/apps doesn't appear to have anything to do with starting MythWelcome any more because it remains unchanged but it dos work correctly. #Uncomment below if you are using firewire #[startup] {/usr/bin/plugctl -n 0 "oPCR[0].n_p2pconnections=1"} [startup] {feh --bg-scale ~/.fluxbox/wallpaper.png} [startup] {/usr/LH/bin/LinHES-run} Things to Note: My 5.5 backend may have been running (starts on mythwelcome) but not when I looked at it. The first time I run /usr/LH/bin/mythwelcome-config.py as root and the second time (when it worked) it was a mythtv user On every boot it displays "Can Not connect to backend" but then it dos and works Ok. I do believe i have a ghost in the system. This is not the first time that this has happened on a stand alone test machine. I learned to isolate the master backend from the network whenever I ran a installed on a test machine but forgot this time. Thanks Britney for your help TVBox |
Author: | brfransen [ Tue Jun 15, 2010 2:29 pm ] |
Post subject: | |
TVBox wrote: /home/mythtv/.fluxbox/apps doesn't appear to have anything to do with starting MythWelcome any more because it remains unchanged but it dos work correctly. In LinHES if MythWelcome is enabled it is run from the LinHES-run script.Quote: On every boot it displays "Can Not connect to backend" but then it dos and works Ok. I do believe i have a ghost in the system. This is not the first time that this has happened on a stand alone test machine. I see this on occasion too but it is just that the backend isn't yet ready for connections when MythWelcome or Mythfrontend first try to connect. In mythtv-setup there are some settings that control how many times and how often it tries to reconnect to the backend.Quote: Thanks Britney for your help You're welcome.
Britney |
Page 3 of 3 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |