| Author |
Message |
|
jesse
|
 Posted: Sun Oct 16, 2005 7:09 pm |
|
|
Joined: Fri Jan 09, 2004 8:30 pm
Posts: 146
Location:
Reno, NV
|
If you have an ATI remote and when you hit the key once and it goes wild and do the same key several times, here is a way to reduce the occurence.
1. cd /usr/src
2. tar jxvf kernel-source<TAB>
3. cd kernel-source<TAB>
4. vi drivers/usb/input/ati_remote.c
5. Find the line that says:
Code: #define FILTER_TIME (HZ / 20)
6. Change it to say Code: #define FILTER_TIME (HZ / 10)
7. make modules
**MAKE MODULES will take a while to complete
8. make install modules
Doing this operation may require you to re-install your NVIDIA drivers.
You may or may not need to reboot to get the modules loaded.
|
|
| Top |
|
 |
|
cesman
|
Posted: Sun Oct 16, 2005 7:46 pm |
|
|
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location:
Fontana, Ca
|
In /usr/src/source
Code: make M=drivers/usb/input Then copy the resulting module to /lib/modules/`uname -r`/drivers/usb/input
_________________
cesman
When the source is open, the possibilities are endless!
|
|
| Top |
|
|
|
DonLKSAB
|
Posted: Mon Nov 07, 2005 5:13 pm |
|
|
Joined: Mon May 10, 2004 10:35 pm
Posts: 46
|
|
Hmm.
I cant get this to work.
I have tryed wit all kinds of NZ settings from 1 to 20.
And nothing seems to make any differance.
I did what jesse wrote.
But i cant do what cesman tells me.
I dont have a /lib/modules/`uname -r`/drivers/usb/input
I have a /lib/modules/`uname -r`/source/drivers/usb/input
but when i try to copy the files to that dir im told that they are "the same files"
So my guess is that my changes doesnt stick.
Any ideas on how to make that changes work?
/DonLKSAB
|
|
| Top |
|
|
|
jesse
|
Posted: Mon Nov 07, 2005 7:12 pm |
|
|
Joined: Fri Jan 09, 2004 8:30 pm
Posts: 146
Location:
Reno, NV
|
|
I didn't point out that you have to be root in order to make these changes.
What Cecil and I said are different means to an end. His way is just a lot quicker than mine.
|
|
| Top |
|
|
|
DonLKSAB
|
Posted: Tue Nov 08, 2005 7:01 am |
|
|
Joined: Mon May 10, 2004 10:35 pm
Posts: 46
|
|
I know that i need to be root.
And i was all the times i tried.
But my remote still flipps out in myth.
As i sad i have tryed all kinds of HZ settings but none of them seems to do any differance.
|
|
| Top |
|
|
|
jesse
|
Posted: Tue Nov 08, 2005 11:28 am |
|
|
Joined: Fri Jan 09, 2004 8:30 pm
Posts: 146
Location:
Reno, NV
|
|
Are you rebooting after you run the install? There is a way to reload the modules, but I don't know which.
|
|
| Top |
|
|
|
DonLKSAB
|
Posted: Tue Nov 08, 2005 12:37 pm |
|
|
Joined: Mon May 10, 2004 10:35 pm
Posts: 46
|
|
Yes i reboot after the install.
Are you running with HZ 10?
|
|
| Top |
|
|
|
jesse
|
Posted: Tue Nov 08, 2005 6:17 pm |
|
|
Joined: Fri Jan 09, 2004 8:30 pm
Posts: 146
Location:
Reno, NV
|
|
Yes, HZ / 10. Going with a lower number will make the remote less responsive/tweaking.
I can't think of any other reason for it not working for you.
|
|
| Top |
|
|
|
DonLKSAB
|
Posted: Fri Nov 18, 2005 12:09 pm |
|
|
Joined: Mon May 10, 2004 10:35 pm
Posts: 46
|
|
Ok now im going nuts.
Had a fresh install and did as jesse wrote.
Worked fine no wierd jumping.
Restarted GDM with a new XF86config-4 file and its back.
So what does the XF86config file has to do with the ATI driver?
/DonLKSAB
|
|
| Top |
|
|
|
DonLKSAB
|
Posted: Fri Nov 18, 2005 12:45 pm |
|
|
Joined: Mon May 10, 2004 10:35 pm
Posts: 46
|
After "make install modules" it says:
Code: Kernel: arch/i386/boot/bzImage is ready (#1)
sh /usr/src/kernel-source-2.6.13.2-chw-3/arch/i386/boot/install.sh 2.6.13.2-chw-3 arch/i386/boot/bzImage System.map "/boot"
In order to use the new kernel image you have just installed, you
will need to reboot the machine. First, however, you will need to
either make a bootable floppy diskette, re-run LILO, or have GRUB
installed.
Checking for ELILO...No
GRUB is installed. To automatically switch to new kernels, point your
default entry in menu.lst to /boot/arch/i386/boot/bzImage-2.6.13.2-chw-3
Building modules, stage 2.
MODPOST I made a "lilo" and it told me: Code: Added Linux *
Skipping /vmlinuz.old
Doesent help at all 
I dont have a "/boot/arch/i386/boot/bzImage-2.6.13.2-chw-3" so i dont think i need to add that.
Any ideas were i do wrong?
|
|
| Top |
|
|
|
DonLKSAB
|
Posted: Fri Dec 23, 2005 10:15 am |
|
|
Joined: Mon May 10, 2004 10:35 pm
Posts: 46
|
|
Hi.
Well i have tryed Jesse's way a couple of times and it never works.
And now i tried Cesman's way and it works.
But Cesman mad e amall error in his post.
You should copy the resulting ati_remote.ko to
/lib/modules/`uname -r`/krenel/drivers/usb/input
Thanks to \Grooby\ on IRC that helped me figure it out.
/DonLKSAB
|
|
| Top |
|
|
View unanswered posts
View active topics
KnoppMyth 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register