My project for today was to get X to display on my LCD monitor in additon to the TV on the
tvout of my pvr350. The monitor that I am using is a wide screen SONY SDM-V72W -
It does a nice 1280x768. I have had it working great under debian prior to installing
knoppmyth. The revelant part of X config is below. The problem is that at the 1280
resolution, I am getting vertical distortion. At 1024x768 or below I don't have the
problem. The problem is most obvious after X starts, but before the window
manager starts. After the window manager starts any text appearing over one of
the vertical strips is distorted.

The pre-window manager X screen looks like this:
http://www.raelee.net/dscn1080.jpg

My X server log for session is at:
http://www.raelee.net/XFree86.0.log.old

Has anyone see this before? I assume its a issue with one of my mode lines.. or maybe I
am missing an option in my x config.
thanks all :)
================
Section "Monitor"
Option "CalcAlgorithm" "UseFrameBufferTiming"
DisplaySize 380 230
HorizSync 30-63
Identifier "Monitor0"
ModelName "SONY SDM-V72W"
VendorName "SNY"
VertRefresh 42-61
UseModes "Modes0"
EndSection

Section "Modes"
Identifier "Modes0"
Modeline "1024x768" 44.00 1024 1032 1208 1264 768 769 777 817 Interlace +HSync +VSync
Modeline "1024x768" 64.00 1024 1048 1184 1344 768 771 777 806
Modeline "1024x768" 78.65 1024 1056 1184 1312 768 772 776 792 -HSync -VSync
Modeline "1280x768" 78.80 1280 1344 1480 1648 768 769 772 795
EndSection

Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
Device "Device0"
Identifier "LCD Screen"
Monitor "Monitor0"
EndSection

Section "Device"
Option "sw_cursor"
Driver "nv"
VendorName "All"
BoardName "All"
BusID "PCI:1:0:0"
EndSection

========================