I've changed to every input, rebooted, brought up the TV - nuthin'.

I've also rechecked all my connections.

Ideas?

Thanks much.

_________________
AMD Athlon XP 2800+
MSI K7N2 Delta2 ATX w/FX5200 AGP video
2X256MB PC3200 RAM
Maxtor 250GB drive (master on IDE 1)
Pioneer DVR-109 (master on IDE 2)
Antec Overture II ATX case with 330watts
Hauppauge 250 in PCI slot 2

Detailed problem reports get you the right answer faster, please don't make us drag the symptoms out of you one at a time... (nice hardware info though...)

Do you have an ivtv section in your /var/log/messages file showing that the card was recognized?

Ooops, I thought I'd hit "reply", which would have just meant you had to scroll up. Sorry.

I am currently installing Windows 2000 so that I can install Hauppauge's drivers and confirm that there is no problem with the hardware.

After that, I'll wipe the drive, burn some sage and fumigate the joint.

I did note that KnoppMyth saw the card, and saw output, but it also said white point not set and other things. I wasn't able to determine if the other messages were significant.

Thank you for your reply, and my post was SUPPOSED to be a reply on this page:

http://mysettopbox.tv/phpBB2/viewtopic. ... 8696#28696

Peter

_________________
AMD Athlon XP 2800+
MSI K7N2 Delta2 ATX w/FX5200 AGP video
2X256MB PC3200 RAM
Maxtor 250GB drive (master on IDE 1)
Pioneer DVR-109 (master on IDE 2)
Antec Overture II ATX case with 330watts
Hauppauge 250 in PCI slot 2