View unanswered posts    View active topics

Board index Linux Installation

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
Grave_Rose
PostPosted: Sun Sep 11, 2005 4:33 pm 
Offline
Joined: Sun Sep 11, 2005 4:20 pm
Posts: 5
Hey everyone,

Well, I've setup the PVR-150 (non-MCE) as well as lirc and have the remote working and all sorts of fun stuff. Of course, the most fun part isn't working: TV-in. Here's what I've done so far:

1. Installed .16
2. Followed the OneFifty wiki file in conjunction with Topic 5552.
3. Made the remote work.
4. Selected "Watch TV" and instead, watched my system lockup (hard-boot needed)
5. Tried numerous options for the different modules to no avail.

I know that there are people who have been able to get this to work and I think I'm suffering from what I call "Where's the ketchup" syndrome (When you're looking for the ketchup, it's right in front of you but you can't see it).

Here are some error messages (dmesg):

Code:
Sep 11 22:15:40 mythtv kernel: ivtv: ==================== START INIT IVTV ====================
Sep 11 22:15:40 mythtv kernel: ivtv: version 0.3.7 (k) loading
Sep 11 22:15:40 mythtv kernel: ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
Sep 11 22:15:40 mythtv kernel: ivtv: In case of problems please include the debug info
Sep 11 22:15:40 mythtv kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Sep 11 22:15:40 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
Sep 11 22:15:40 mythtv kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
Sep 11 22:15:40 mythtv kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
Sep 11 22:15:40 mythtv kernel: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 9 (level, low) -> IRQ 9
Sep 11 22:15:40 mythtv kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Sep 11 22:15:40 mythtv kernel: tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8208809
Sep 11 22:15:40 mythtv kernel: tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
Sep 11 22:15:40 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Sep 11 22:15:40 mythtv kernel: tveeprom: audio processor = CX25841 (type = 23)
Sep 11 22:15:40 mythtv kernel: tveeprom: decoder processor = CX25841 (type = 1c)
Sep 11 22:15:40 mythtv kernel: ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
Sep 11 22:15:40 mythtv kernel: lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150))
Sep 11 22:15:40 mythtv kernel: ivtv: i2c attach to card #0 ok [client=Hauppauge IR (PVR150), addr=71]
Sep 11 22:15:40 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
Sep 11 22:15:40 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Sep 11 22:15:40 mythtv kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Sep 11 22:15:42 mythtv kernel: cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
Sep 11 22:15:42 mythtv kernel: ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44]
Sep 11 22:15:43 mythtv kernel: ivtv: Encoder revision: 0x02040011
Sep 11 22:15:43 mythtv kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
Sep 11 22:15:43 mythtv kernel: ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
Sep 11 22:15:43 mythtv kernel: ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total)
Sep 11 22:15:43 mythtv kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
Sep 11 22:15:43 mythtv kernel: tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
Sep 11 22:15:43 mythtv kernel: ivtv warning: i2c client addr: 0x1b not found for command 0x40047767!
Sep 11 22:15:43 mythtv kernel: ivtv warning: i2c client addr: 0x43 not found for command 0x40085618!
Sep 11 22:15:43 mythtv kernel: ivtv warning: i2c client addr: 0x43 not found for command 0x402c5639!
Sep 11 22:15:43 mythtv kernel: ivtv: Initialized WinTV PVR 150, card #0
Sep 11 22:15:43 mythtv kernel: ivtv: ====================  END INIT IVTV  ====================
Sep 11 22:15:43 mythtv kernel: ivtv warning: i2c client addr: 0x1b not found for command 0x40047767!


Here is my /etc/mythtv/modules/ivtv file:

Code:
alias char-major-81-0 ivtv
alias char-major-81 videodev
alias char-major-61 lirc_i2c
#options ivtv debug=1
#options tuner type=2
#options ivtv debug=1
options cx25840
# no_black_magic=1
options msp3400 once=1 simple=1
options ivtv ivtv_std=0 tuner=50 tda9887=0
options saa7127 i2c_enable=1

install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115;  /sbin/modprobe --ignore-install  ivtv
remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner


And, finally, my /etc/modprobe.d/ivtv file:

Code:
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-61 lirc_i2c
options ivtv tuner=50 ivtv_std=0 tda9887=0
#add above ivtv lirc_dev lirc_i2c


Any and all help is appreciated.

Gr@ve_Rose
Top
 Profile  
 
MrFahrenheit
 Post subject:
PostPosted: Mon Sep 12, 2005 11:56 am 
Offline
Joined: Mon Aug 01, 2005 9:54 pm
Posts: 77
I don't know if it will help us, but can you be more specific on what other hardware you and what inputs you are using into the tv card?
Top
 Profile  
 
Grave_Rose
 Post subject:
PostPosted: Mon Sep 12, 2005 2:05 pm 
Offline
Joined: Sun Sep 11, 2005 4:20 pm
Posts: 5
P3-933
256MB RAM
SoundBlaster (Chipset) Sound Card
Ye ole 10/100 NIC (ne2000 chipset)
ATI Radeon 7000 AGP 32/MB w/Comp-out and S-out <-- This one kinda' makes me wonder if the vid-out may have something to do with it. *shrugs*

I'm currently using Co-ax in for my input but have tried Comp-in as well (from my GameCube). The big pain in the arse is that it locks up tight so I can't do active troubleshooting. /var/log/messages is just normal messages stuff.

I'll try and get some more info later on in the evening as I just got in from work and need some food. ^_^ I'll grab "lspci", "cat /proc/cpuinfo", "cat /proc/meminfo" and post it once I get some grub into me. :D

Thanks again for any/all help. Will update soon.

Gr@ve_Rose
Top
 Profile  
 
Grave_Rose
 Post subject:
PostPosted: Mon Sep 12, 2005 6:02 pm 
Offline
Joined: Sun Sep 11, 2005 4:20 pm
Posts: 5
Sorryit took a while... The driving range called and was taunting me. ^_^

cat /proc/cpuinfo

Code:
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 8
model name      : Pentium III (Coppermine)
stepping        : 10
cpu MHz         : 935.515
cache size      : 256 KB
physical id     : 0
siblings        : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips        : 1851.39


cat /proc/meminfo
Code:
MemTotal:       254288 kB
MemFree:         70112 kB
Buffers:          5816 kB
Cached:         111928 kB
SwapCached:          0 kB
Active:         107132 kB
Inactive:        60948 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       254288 kB
LowFree:         70112 kB
SwapTotal:      882496 kB
SwapFree:       882496 kB
Dirty:              72 kB
Writeback:           0 kB
Mapped:          74752 kB
Slab:            10388 kB
CommitLimit:   1009640 kB
Committed_AS:   248328 kB
PageTables:        840 kB
VmallocTotal:   770040 kB
VmallocUsed:     26412 kB
VmallocChunk:   742900 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     4096 kB


lspci
Code:
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 02)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
0000:02:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
0000:02:0a.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
0000:02:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)


It should be worth noting that I'm getting a lot of ichxrom error messages as well like:

Code:
JEDEC: Found no ichxrom device at location zero


Hope this helps. ^_^

Gr@ve_Rose
Top
 Profile  
 
Grave_Rose
 Post subject:
PostPosted: Sun Sep 25, 2005 2:19 pm 
Offline
Joined: Sun Sep 11, 2005 4:20 pm
Posts: 5
Just looking to 'bump' this to see if anyone has any ideas. I won't 'bump' again - I figure once to post and once to bump before I call it quits. ^_^

Gr@ve_Rose
Top
 Profile  
 
aflat
 Post subject:
PostPosted: Thu Sep 29, 2005 10:29 am 
Offline
Joined: Thu Sep 29, 2005 7:57 am
Posts: 7
Location: Groton, MA
Can you record anything, without watching it? Try to schedule a recording, and later, try to watch the recording. That way you can see if it is the recording, or the playback that is causing the lockup.
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Thu Sep 29, 2005 11:05 am 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Is the 150 sharing an IRQ w/ anything?

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
Grave_Rose
 Post subject:
PostPosted: Thu Sep 29, 2005 11:58 am 
Offline
Joined: Sun Sep 11, 2005 4:20 pm
Posts: 5
Actually, I wanted to make sure it wasn't the card so I installed FC4 and got it up and running on that with Myth yesterday. I think I may stick with FC4 as it's up and running now. I should've closed the thread. Sorry. :oops: I do appreciate the feedback though.

Gr@ve_Rose
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 


Board index Linux Installation

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu