View unanswered posts    View active topics

Board index Linux Installation

All times are UTC - 6 hours





Post new topic Reply to topic  Page 2 of 2
  [ 30 posts ] 
Go to page Previous  1, 2
Print view Previous topic   Next topic  
Author Message
Search for:
madsholme
 Post subject:
PostPosted: Tue Jan 03, 2006 10:43 pm 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
np :)

alright this is what i done:

removed this file to another dir:

Code:
/etc/init.d/install-nvidia-7174-debian


then i tryed to look for these:

Code:
/etc/rc0.d/K90install-nvidia-7174-debian
/etc/rc1.d/K90install-nvidia-7174-debian
/etc/rc2.d/S90install-nvidia-7174-debian
/etc/rc3.d/S90install-nvidia-7174-debian
/etc/rc4.d/S90install-nvidia-7174-debian
/etc/rc5.d/S90install-nvidia-7174-debian
/etc/rc6.d/K90install-nvidia-7174-debian


Could not find them so i continued with this:

Code:
/usr/local/bin/install-nvidia-6629-debian.sh


when its done i get this warning:

Code:
warning:  Clock skew detected.  Your build may be incomplete.


I do a restart, of the system, and the screen is still black :(

does this mean anything?

Code:
warning:  Clock skew detected.  Your build may be incomplete.


could it be the cauce of my problem? the driver isent build properly?

BTW when i ctrl+alt+f1 to get a konsole, i also see some mesages about ACPI, along with the msg it using nvidia driver 6629.
Code:
ACPI: PCI: Interrupt for device 000:01:00:0 Disabled
ACPI: PCI: Interrupt 000:01:00:0[A] -> GSI 16 (level, low) -> IRQ 17


dont know if this means anything special.
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Tue Jan 03, 2006 11:17 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
The "clock skew" message usually means that some of the files have datestamps in the future. or the like. This can happen for a variety of reasons including mis-setting the clock or a clock with serious drift being agressively corrected.

First lets check your clock to make sure it's right:
Code:
date
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Wed Jan 04, 2006 1:22 pm 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
tjc wrote:
The "clock skew" message usually means that some of the files have datestamps in the future. or the like. This can happen for a variety of reasons including mis-setting the clock or a clock with serious drift being agressively corrected.

First lets check your clock to make sure it's right:
Code:
date


date is a bit behind :D

Code:
root@backend:~# date
Sat Mar  6 05:03:22 UTC 1999
root@backend:~#


so i did a:

Code:
root@backend:~# date 010420172006
Wed Jan  4 20:17:00 UTC 2006
root@backend:~#


so then i did a new:
Code:
/usr/local/bin/install-nvidia-6629-debian.sh


This time no clock srew msg was shown, althought the screen is still only black in GDM...
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Wed Jan 04, 2006 8:00 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
madsholme wrote:
date is a bit behind :D
Code:
root@backend:~# date
Sat Mar  6 05:03:22 UTC 1999
root@backend:~#

so i did a:
Code:
root@backend:~# date 010420172006
Wed Jan  4 20:17:00 UTC 2006
root@backend:~#

If you've got webmin working (if not now is a good time) go into the Hardware -> System Time screen and push the system time into the hardware clock so this doesn't keep recurring. The button for this is called "Set hardware time to system time". ;-)

Let me think on the other problem some more... I think we're going to end up needing to see your /var/log/XFree86.0.log to troubleshoot this. I suspect that you need a PAL compatible /etc/X11/XF86Config-4. A search of the forums should turn up at least a couple...

BTW - It'd be nice to have at least a video standard or country for the location in your profile (hint, hint, ...) That way I won't keep forgetting and suggesting that you try NTSC compatible examples... Just a bit of enlightened self interest...
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Wed Jan 04, 2006 9:10 pm 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
alright tnx, wheni go under http://my ip
all i see is a page with Mythweb, and avi manager, and some docs.

I cant go to MythWEB, probaly becaus mythtv isent setup properly yet.
mabye this isent webmin ?

regarding my country and so on, i live in Denmark, Europe, so its PAL. How ever this shouldent be the problem here. Since i cant get a Output on a monitor. When it stats GDM my monitor goes black. The mashine i am setting it up on, is supposed to be a Backend for my Via Frontend, and the monitor works fine with my via board. no problem there. oh and my TV can display NTSC also if it were the case :) I also tryed a geforce2 card with no tv out and a geforce fx 5200 with tv out same results.

my xfree86 log.. dident know if you wanted it all.

Code:
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-10.1unichrome30.1 20050205195924 glaweh@)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.10-xenU i686 [ELF]
Build Date: 05 February 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.13.2-chw-3 (root@dev.mysettopbox.tv) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #1 SMP Wed Sep 21 08:15:54 PDT 2005
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Mar  6 12:29:14 1999
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "USB Mouse"
(WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
   Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts/truetype").
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
   Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype/ttf-bitstream-vera".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/share/fonts/truetype/ttf-bitstream-vera").
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/CID" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/TrueType" does not exist.
   Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/Type1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail" "true"
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
   XFree86 ANSI C Emulation: 0.2
   XFree86 Video Driver: 0.6
   XFree86 XInput driver : 0.4
   XFree86 Server Extension : 0.2
   XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000f83c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1462,7420 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1462,7420 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1462,7420 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1462,7420 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 1462,7420 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1462,7420 rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0322 card 1043,80df rev a1 class 03,00,00 hdr 00
(II) PCI: 02:02:0: chip 3388,0021 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 02:0b:0: chip 10ec,8139 card 1462,742c rev 10 class 02,00,00 hdr 00
(II) PCI: 03:08:0: chip 4444,0016 card 0070,e807 rev 01 class 04,00,00 hdr 00
(II) PCI: 03:09:0: chip 4444,0016 card 0070,e817 rev 01 class 04,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000d (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xfc900000 - 0xfe9fffff (0x2100000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xd7f00000 - 0xe7efffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,3), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
   [0] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [1] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [2] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [3] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
   [0] -1   0   0xfea00000 - 0xfeafffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
   [0] -1   0   0xe7f00000 - 0xf7efffff (0x10000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (2:2:0), (2,3,3), BCTRL: 0x0007 (VGA_EN is cleared)
(II) Bus 3 prefetchable memory range:
   [0] -1   0   0xe7f00000 - 0xf7efffff (0x10000000) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfd000000/24, 0xd8000000/27, BIOS @ 0xfe9e0000/17
(--) PCI: (3:8:0) unknown vendor (0x4444) unknown chipset (0x0016) rev 1, Mem @ 0xf0000000/26
(--) PCI: (3:9:0) unknown vendor (0x4444) unknown chipset (0x0016) rev 1, Mem @ 0xec000000/26
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
   [0] -1   0   0xfeafff00 - 0xfeafffff (0x100) MX[B]
   [1] -1   0   0x20000000 - 0x200003ff (0x400) MX[B]
   [2] -1   0   0xfebffc00 - 0xfebfffff (0x400) MX[B]
   [3] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [4] -1   0   0xec000000 - 0xefffffff (0x4000000) MX[B](B)
   [5] -1   0   0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
   [6] -1   0   0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
   [7] -1   0   0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
   [8] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [9] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [10] -1   0   0x00000c00 - 0x00000c1f (0x20) IX[B]
   [11] -1   0   0x0000fc00 - 0x0000fc0f (0x10) IX[B]
   [12] -1   0   0x0000ec00 - 0x0000ec1f (0x20) IX[B]
   [13] -1   0   0x0000e800 - 0x0000e81f (0x20) IX[B]
   [14] -1   0   0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xfeafff00 - 0xfeafffff (0x100) MX[B]
   [1] -1   0   0x20000000 - 0x200003ff (0x400) MX[B]
   [2] -1   0   0xfebffc00 - 0xfebfffff (0x400) MX[B]
   [3] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [4] -1   0   0xec000000 - 0xefffffff (0x4000000) MX[B](B)
   [5] -1   0   0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
   [6] -1   0   0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
   [7] -1   0   0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
   [8] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [9] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [10] -1   0   0x00000c00 - 0x00000c1f (0x20) IX[B]
   [11] -1   0   0x0000fc00 - 0x0000fc0f (0x10) IX[B]
   [12] -1   0   0x0000ec00 - 0x0000ec1f (0x20) IX[B]
   [13] -1   0   0x0000e800 - 0x0000e81f (0x20) IX[B]
   [14] -1   0   0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xfeafff00 - 0xfeafffff (0x100) MX[B]
   [6] -1   0   0x20000000 - 0x200003ff (0x400) MX[B]
   [7] -1   0   0xfebffc00 - 0xfebfffff (0x400) MX[B]
   [8] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [9] -1   0   0xec000000 - 0xefffffff (0x4000000) MX[B](B)
   [10] -1   0   0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
   [11] -1   0   0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
   [12] -1   0   0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
   [13] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [17] -1   0   0x00000c00 - 0x00000c1f (0x20) IX[B]
   [18] -1   0   0x0000fc00 - 0x0000fc0f (0x10) IX[B]
   [19] -1   0   0x0000ec00 - 0x0000ec1f (0x20) IX[B]
   [20] -1   0   0x0000e800 - 0x0000e81f (0x20) IX[B]
   [21] -1   0   0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.6629
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.1
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.2
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 2.0.2
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.13.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.6629
   Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 XInput Driver
   ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA X Driver  1.0-6629  Wed Nov  3 13:14:07 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xfeafff00 - 0xfeafffff (0x100) MX[B]
   [6] -1   0   0x20000000 - 0x200003ff (0x400) MX[B]
   [7] -1   0   0xfebffc00 - 0xfebfffff (0x400) MX[B]
   [8] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [9] -1   0   0xec000000 - 0xefffffff (0x4000000) MX[B](B)
   [10] -1   0   0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
   [11] -1   0   0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
   [12] -1   0   0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
   [13] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [17] -1   0   0x00000c00 - 0x00000c1f (0x20) IX[B]
   [18] -1   0   0x0000fc00 - 0x0000fc0f (0x10) IX[B]
   [19] -1   0   0x0000ec00 - 0x0000ec1f (0x20) IX[B]
   [20] -1   0   0x0000e800 - 0x0000e81f (0x20) IX[B]
   [21] -1   0   0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) resource ranges after probing:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xfeafff00 - 0xfeafffff (0x100) MX[B]
   [6] -1   0   0x20000000 - 0x200003ff (0x400) MX[B]
   [7] -1   0   0xfebffc00 - 0xfebfffff (0x400) MX[B]
   [8] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [9] -1   0   0xec000000 - 0xefffffff (0x4000000) MX[B](B)
   [10] -1   0   0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
   [11] -1   0   0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
   [12] -1   0   0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
   [13] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [14] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [15] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [16] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [17] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [18] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [19] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [20] -1   0   0x00000c00 - 0x00000c1f (0x20) IX[B]
   [21] -1   0   0x0000fc00 - 0x0000fc0f (0x10) IX[B]
   [22] -1   0   0x0000ec00 - 0x0000ec1f (0x20) IX[B]
   [23] -1   0   0x0000e800 - 0x0000e81f (0x20) IX[B]
   [24] -1   0   0x0000e400 - 0x0000e41f (0x20) IX[B]
   [25] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [26] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xFD000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5200
(--) NVIDIA(0): VideoBIOS: 04.34.20.16.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at  8 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 400 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) NVIDIA(0): Monitor0: Using hsync range of 28.00-96.00 kHz
(II) NVIDIA(0): Monitor0: Using vrefresh range of 50.00-75.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 400.00 MHz
(II) NVIDIA(0): Not using mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "768x576" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "768x576" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "1152x864" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "1152x864" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using mode "1400x1050" (vrefresh out of range)
(II) NVIDIA(0): Not using mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x512" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1280x960" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1280x960" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1152x864" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1152x768" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "960x720" (height 1440 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "928x696" (height 1392 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "640x512" (height 1024 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "640x512" (height 1024 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "576x432" (height 864 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0):   horizontal sync start (589) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0):      Mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(**) NVIDIA(0):      Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0):      Mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0):      Mode "768x576": 45.5 MHz, 45.1 kHz, 75.0 Hz
(**) NVIDIA(0):      Mode "768x576": 42.9 MHz, 43.3 kHz, 72.0 Hz
(**) NVIDIA(0):      Mode "768x576": 35.0 MHz, 35.8 kHz, 60.0 Hz
(**) NVIDIA(0):      Mode "640x480": 25.2 MHz, 32.1 kHz, 63.1 Hz
(**) NVIDIA(0):      Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): Display dimensions: (260, 200) mm
(--) NVIDIA(0): DPI set to (100, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
   compiled for 4.3.0.1, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0xd8000000 - 0xdfffffff (0x8000000) MX[B]
   [1] 0   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B]
   [2] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [3] -1   0   0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
   [4] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [5] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [6] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [7] -1   0   0xfeafff00 - 0xfeafffff (0x100) MX[B]
   [8] -1   0   0x20000000 - 0x200003ff (0x400) MX[B]
   [9] -1   0   0xfebffc00 - 0xfebfffff (0x400) MX[B]
   [10] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [11] -1   0   0xec000000 - 0xefffffff (0x4000000) MX[B](B)
   [12] -1   0   0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
   [13] -1   0   0xfe9e0000 - 0xfe9fffff (0x20000) MX[B](B)
   [14] -1   0   0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
   [15] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [16] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
   [17] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
   [18] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
   [19] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [20] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [21] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
   [22] -1   0   0x00000c00 - 0x00000c1f (0x20) IX[B]
   [23] -1   0   0x0000fc00 - 0x0000fc0f (0x10) IX[B]
   [24] -1   0   0x0000ec00 - 0x0000ec1f (0x20) IX[B]
   [25] -1   0   0x0000e800 - 0x0000e81f (0x20) IX[B]
   [26] -1   0   0x0000e400 - 0x0000e41f (0x20) IX[B]
   [27] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [28] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms" "true"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing extension GLX
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) USB Mouse: Protocol: "IMPS/2"
(**) Option "SendCoreEvents" "true"
(**) USB Mouse: always reports core events
(**) Option "CorePointer"
(**) USB Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "5"
(**) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) USB Mouse: ZAxisMapping: buttons 4 and 5
(**) USB Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) USB Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Wed Jan 04, 2006 10:00 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
I'm going to respond in pieces since it'll take me a while to go through your log file.
madsholme wrote:
alright tnx, wheni go under http://my ip
all i see is a page with Mythweb, and avi manager, and some docs.

I cant go to MythWEB, probaly becaus mythtv isent setup properly yet.
mabye this isent webmin ?

It's not. See this page on the wiki: http://www.knoppmythwiki.org/index.php?page=WebminHowTo

madsholme wrote:
regarding my country and so on, i live in Denmark, Europe, so its PAL.
Please do me a favor. Click on this link: http://mysettopbox.tv/phpBB2/profile.php?mode=editprofile scroll down to location:, type "Denmark (PAL-B/G)" in entry field to the right of that, scroll down to the bottom and click on the Submit button. I help dozens of different folks a day and keeping stuff like this straight is just about impossible without a few clues to jog my overloaded and aging memory.

Have you seen the PAL HowTo on the wiki? http://www.knoppmythwiki.org/index.php?page=PalHowTo The MonitorToTVTransition page it points to is very helpful as well. http://www.knoppmythwiki.org/index.php?page=MonitorToTVTransition

madsholme wrote:
How ever this shouldent be the problem here. Since i cant get a Output on a monitor. When it stats GDM my monitor goes black.

During boot he BIOS sets the video card for a "lowest common denomitor" text mode. However to display the GUI and video output requires that you use a more sophisticated graphics mode under the control of your /etc/X11/XF86Config-4 file. This transition occurs when you start up GDM (Gnome Destop Manager?) to run the GUI. If your XF86Config isn't right this is when the problem will show up.
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Thu Jan 05, 2006 1:21 am 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
Alright fixed my location :) stupid of me not doing so before i can see that now :)

Tnx got the date fixed now tnx.

I tryed one of those pal, guides, no change there. I am considering buying a cheap ATI 700 or 8500 card and try with that.
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Thu Jan 05, 2006 7:26 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
What are you using for your video output anyway? From your X log file it looks like it's just a computer monitor, if that isn't the case it's probably the root of your problem. Also, are the Horz/Vert sync rates listed there correct for the device? For a computer monitor they should either be printed on the rear label or in the manuals.
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Thu Jan 05, 2006 7:41 pm 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
tjc wrote:
What are you using for your video output anyway? From your X log file it looks like it's just a computer monitor, if that isn't the case it's probably the root of your problem. Also, are the Horz/Vert sync rates listed there correct for the device? For a computer monitor they should either be printed on the rear label or in the manuals.


first off, i am sure i wrote i was using a monitor? oh well i am using a monitor. Dont got any manuels, on it. How ever when i install knopmyth on my via epia board and hook up my monitor i dont get this isue, it works just fine.

also just tryed using tvout, its the same. I am realy starting to get despret here now :(
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Thu Jan 05, 2006 9:05 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Come on follow through! This isn't something you can just dab at and pretend. It's more like making pottery (or bread), where you'll never get anywhere without getting mud (or flour) up to your elbows. So lets roll up those sleeves and get to it!

- Did you check the label on the monitor for the horizontal and vertical frequency sync ranges?
- Did you search the net for that frequency information? Even if the manufacturers website doesn't list it for your monitor anymore, there are online resources which will.
- Did you alrready do that and just fail to answer my previous question?

There are very few reasons to get a black screen with a well supported video chipset like the FX5200. The main one (at about 95% probablity) is "your XF86Config-4 is very wrong". Within that, the most obvious problem that occurs to me is "your monitor can't sync to that frequency".

It might also help if you either post your whole XF86Config-4 here, or tell us which sample you're using, or ... Don't forget to include your monitor info.
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Fri Jan 06, 2006 9:55 am 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
Sorry for my little outburst :P

This is my XF86Config-4

Code:
Section "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"

EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
        FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
#       FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
#       FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/share/fonts/ttf/western"
        FontPath     "/usr/share/fonts/ttf/decoratives"
        FontPath     "/usr/share/fonts/truetype"
        FontPath     "/usr/share/fonts/truetype/openoffice"
        FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
        FontPath     "/usr/share/fonts/truetype/openoffice"
        FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
        FontPath     "/usr/share/fonts/latex-ttf-fonts"
        FontPath     "/usr/X11R6/lib/X11/fonts/defoma/CID"
        FontPath     "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
#       Load  "GLcore"
        Load  "dbe"
#       Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "bitmap" # bitmap-fonts
        Load  "speedo"
        Load  "type1"
        Load  "freetype"
        Load  "record"
       Load  "freetype"
        Load  "record"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "CoreKeyboard"
        Option "XkbRules" "xfree86"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "us"

EndSection

Section "InputDevice"
        Identifier  "Serial Mouse"
        Driver      "mouse"
        Option      "Protocol" "Microsoft"
        Option      "Device" "/dev/ttyS0"
       Option      "Protocol" "Microsoft"
        Option      "Device" "/dev/ttyS0"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier  "PS/2 Mouse"
        Driver      "mouse"
        Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
        Option      "Device" "/dev/psaux"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
        Option          "SendCoreEvents"        "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
        Identifier      "Monitor0"
        Option  "DPMS"  "false"
        VendorName      "CPQ"
        ModelName       "CPQ1307"
#       HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
       ModelName       "CPQ1307"
#       HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
        HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
        VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
#       VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT defa$
        # These are the DDC-probed settings reported by your monitor.
        # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
        ModeLine "1280x1024"    135.00 1280 1296 1440 1688 1024 1025 1028 1066 $
        # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
        ModeLine "1024x768"      78.75 1024 1040 1136 1312  768  769  772  800 $
        # 1024x768, 60.0Hz; hfreq=48.36, vfreq=60.00
        ModeLine "1024x768"      65.00 1024 1048 1184 1344  768  771  777  806 $
        # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
        ModeLine "800x600"       40.00  800  840  968 1056  600  601  605  628 $
        # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
        ModeLine "640x480"       31.50  640  656  720  840  480  481  484  500 $
        # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
        ModeLine "640x480"       25.17  640  648  744  784  480  482  484  509 $
        # Extended modelines with GTF timings
       ModeLine "640x480"       25.17  640  648  744  784  480  482  484  509 $
        # Extended modelines with GTF timings
        # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
        ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vs$
        # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
        ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vs$
        # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
        ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vs$
        # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
        ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +V$
        # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
        ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +V$
        # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
        ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +V$
        # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
        ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +V$
        # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
        ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSy$
        # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
       ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSy$
        # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
        ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSyn$
        # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
        ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSy$
        # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
        ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSy$
        # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
        ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HS$
        # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
        ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HS$
        # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
        ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HS$
        # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
        ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085 $
        # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
        ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087 $
        # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
        ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094 $        # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
        ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094 $
        # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
        ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096 $
        # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
        ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103 $
        # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
        ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112 $
        # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
        ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271 $
EndSection

Section "Device"
        ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
        Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
        Driver      "nvidia"
        VendorName  "All"
        BoardName   "All"
#       BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultColorDepth 24
        SubSection "Display"
       DefaultColorDepth 24
        SubSection "Display"
                Depth     1
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     4
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     16
       SubSection "Display"
                Depth     16
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     32
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode 0666
EndSection


I realy dont think its my monitor, as it is working fine when i use it on my Via Epia, and installing Knopmyth.

The XF86Config-4 File is from wikipedia, on the 5200 posting there was there.

My MOnitor is a realy old, like 97 something. Its from COmpaq, and it hasent have any listings, on its specs, but as i said before, its working fine when installing other computers ?

On its back is says its a model 311.

"Did you alrready do that and just fail to answer my previous question? "

Yes i did sorry :) Hope this helps some more.
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Fri Jan 13, 2006 7:14 am 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
got myself a new gfx card, this time its a Matrox, for PCI. Again same problem and isue. Tryed doing a reinstall, same thing again.

is there a way to run some sort of "Xorg config" ?

/edit

BTW my MB is using Intel 865PE chipsæt, dunno if that is a problem?
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Sat Jan 14, 2006 10:14 am 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
alright last try, if this dosent help i will just quit the idea of having a backend.
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Sun Jan 15, 2006 10:16 am 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
alright think i am on to something:


Code:
root@mythtv:~# X -configure
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-10.1unichrome30.1 20050205195924 glaweh@)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.10-xenU i686 [ELF]
Build Date: 05 February 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.13.2-chw-3 (root@dev.mysettopbox.tv) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #1 SMP Wed Sep 21 08:15:54 PDT 2005
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jan 15 17:15:05 2006
List of video drivers:
        atimisc
        nvidia
        r128
        radeon
        mga
        glint
        nv
        tga
        s3
        s3virge
        sis
        rendition
        neomagic
        i740
        tdfx
        savage
        via
        cirrus
        vmware
        tseng
        trident
        chips
        apm
        glide
        fbdev
        i128
        nsc
        ati
        i810
        imstt
        newport
        ark
        cyrix
        siliconmotion
        vesa
        vga
        dummy
        v4l
(EE) Glide driver:

Could not load the shared library file for Glide: "libglide2x.so"!

You need to have Glide installed to run the glide driver for XFree86.
Also, you need to tell XFree86 where the libglide2x.so file is placed
by making a soft link in the /usr/X11R6/lib/modules directory that points
to the libglide2x.so file. For example (if your libglide2x.so file is in
/usr/lib):

  # ln -s /usr/lib/libglide2x.so /usr/X11R6/lib/modules


(EE) Failed to load module "glide" (a required submodule could not be loaded, 2)
(++) Using config file: "/root/XF86Config.new"


XFree86 detected your mouse at device /dev/mouse.
Please check your config if the mouse is still not
operational, as by default XFree86 tries to autodetect
the protocol.

Your XF86Config file is /root/XF86Config.new

To test the server, run 'XFree86 -xf86config /root/XF86Config.new'

root@mythtv:~#
Top
 Profile  
 
madsholme
 Post subject:
PostPosted: Sun Jan 15, 2006 1:02 pm 
Offline
Joined: Fri Dec 02, 2005 7:23 am
Posts: 171
Location: Denmark (PAL-B/G)
Got it working..

Solution:

first, stop gdm

Code:
/etc/init.d/ gdm stop



then, run the config tool.
Code:
X -configure


copy the new config file and replace the old

Code:
cp /root/XF86Config.new /etc/X11/XF86Config-4


start gdm again

Code:
/etc/init.d/ gdm start
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 30 posts ] 
Go to page Previous  1, 2


Board index Linux Installation

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu