LinHES Forums
http://forum.linhes.org/

Problem with BootCD
http://forum.linhes.org/viewtopic.php?f=14&t=10630		 Page 1 of 1
Author:  mighty_gordon [ Mon Jun 26, 2006 1:55 pm ]
Post subject:  Problem with BootCD
Hello everybody, i have the following Problem while booting from the CD. The Bootprocess stops suddenly.
Quote:
<3>hda7: bad acces: block=2, count=2
end_request: I/O error, dev 03:03 (hda), sector 2
EXT2-fs: unable to read superblock
Unable to handle kernel paging request at virtual adress 0030Se40
printing eip:
c013340a
*pde = 000000000
Oops: 0002
CPU: 0
EIP: 010:[<c013340a>] Not tainted
EFLAGS: 00010046
eax: cef36f40 ebx: c1305e40 ecx: cef36f60 ed: 00305e40
esl: 000cf000 cdi: 0024a000 ebp: c025d170 esp: c130bf50
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c130b000)


Code: 89 02 89 50 04 c7 01 00 00 00 00 8d 53 10 8b 43 10 89 01 89
>0>Kernel panic: Attempted to kill init!


Can somone help me? Also the failsafe mode isnt working! :(

Greetings,
mighty.

HTPC:
nForce Board
AMD Duron 800Mhz
256 mb DDRAM
WinFast Geforce MX4000 (128mb)
WinFast TV2000XP Expert Edition
Maxtor 80GB HDD (Windows XP pre-installed, but now i want a complete linux installation)
Bios is set to "Boot up from CD"
Author:  tjc [ Mon Jun 26, 2006 7:09 pm ]
Post subject: 
Sounds like a bad burn. Double check the md5sum on the ISO image you downloaded and burn a new CD at a lower speed. If you have a different batch of blank disks it might be worth using one of those too.
Author:  mighty_gordon [ Tue Jun 27, 2006 1:11 am ]
Post subject:  Thanks...
i checked the md5 checksum file on the cd, an it has a different line of numbers as the original!

i will try a new burn, with low speed, thx for help.

wish a nice day,
mighty.
Author:  mighty_gordon [ Tue Jun 27, 2006 1:37 am ]
Post subject: 
I tried again with low speed burn (8x), but I still have the same problem.
installation stops suddenly, after 30 seconds.

it looks like the md5 checksum is a total different, I downloaded the iso from planet mirror, could it be a bad iso?

The Checksum on the CD is:
E223C904FD88E29780A887209791E661
And I think it should be:
38970f66ec2c8e29467da02c70dae55f

need help, the CDs I use to burn are usually good...


greetings,
mighty.
Author:  tjc [ Tue Jun 27, 2006 10:07 pm ]
Post subject: 
Did you check the sum for the ISO image before burning it?
Author:  mighty_gordon [ Wed Jun 28, 2006 2:35 am ]
Post subject: 
No, how can i check the sum before burning?

greetings,
mighty.
Author:  PoCX [ Wed Jun 28, 2006 2:02 pm ]
Post subject: 
Um, Planet Mirror only shows R4s, look for R5C7 which is the lastest release.

If you go to ftp://ftp.knoppmyth.net/. under the directories /R5/R5C7 you can get the current release and the MD5.

Also if you would like to share your bandwidth you can go to the downloads page and use the torrent link.
Author:  Dak48 [ Wed Jun 28, 2006 2:52 pm ]
Post subject: 
If you are buring with K3B it will automatically compare the checksums before burning. And to me, it sounds like your download is bad. Redownload again, compare the checksums with the KnoppyMyth site, if they match, you should get a good burn.
Author:  PoCX [ Wed Jun 28, 2006 3:52 pm ]
Post subject: 
Like I posted before, he said he got the ISO from Planet Mirror, which the link on the DL page goes to R4 ISOs. Even if he got the ISO without errors he would need to use the correct MD5 to make sure the image was correct. Either way he should pick another source for the image since Planet Mirror seems to have fallen behind on the ISO mirroring.
Author:  mighty_gordon [ Thu Jun 29, 2006 2:03 am ]
Post subject: 
Okay, thanks all. I think i use BitTorrent, because it checks the download itself! ;)

Thanks for help,
greetings mighty.
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/