Hi everyone

I'm excited about Mythtv, especially this cool project with the Live Knoppix CD. I was excited when it started to boot the linux kernel, but when it gets to reading my Partiion Talbe and setting up /etc/fstab is just locks up. I've tried it in expert mode, run level 2 mode, pretty much all the modes.. What could be the problem??

tia

magnetic

_________________
Windows XP Pro SP 2
AMD Athlon XP 2400+ 2ghz
512mb DDR Ram
Radeon 9500 Pro (softmodded to 9700)
2 x 40gb Seagate Baracuda UDMA IDE HDs
1 x 36gb Seagate Cheetah 10krpm UWSCSI HD

Are those two 40gb drives in some sort of raid format? If they are that could have something to do with it. Another thing is that the cd your burned might be bad. I know that when I burn cd-rw media with my NEC dvd/cd burner I can only read them successfully in that drive but if I burn a regular cdr they work in other machines. I think it has something to do with the firmware I have on the drive but works for everything else.

KnoppMyth is not a live MythTV CD.
KnoppMyth is not a live Knoppix CD.
You cannot use the CD as a frontend without a working backend. Try booting with the noscsi option.

_________________
cesman

When the source is open, the possibilities are endless!