View unanswered posts    View active topics

Board index Linux Installation

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
bigshwjoe
PostPosted: Sun Aug 27, 2006 8:20 am 
Offline
Joined: Sun Apr 30, 2006 2:39 pm
Posts: 3
Last night I ran an auto install of R5D1 and it went smoothly. Upon first boot I was able to select my tuner (Hauppauge 250) and it looked like everything was okay.

I then went to watch tv and the screen flashes for a second then nothing happens. I also tried going to mythweb to add some programs to record and that behaves oddly. I can see tv listings and am able to schedule a recording so it shows up in 'recording schedules' but nothing ever appears in 'upcoming recordings.' I'm really confused as to what is going on and would appreciate any help I can get.

Here is some info from /var/log/messages - if more is needed to help diagnose this let me know:

Quote:
Aug 27 09:19:10 tijo kernel: ivtv: ==================== START INIT IVTV ====================
Aug 27 09:19:10 tijo kernel: ivtv: version 0.7.0 (tagged release) loading
Aug 27 09:19:10 tijo kernel: ivtv: Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4
Aug 27 09:19:10 tijo kernel: ivtv: In case of problems please include the debug info between
Aug 27 09:19:10 tijo kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Aug 27 09:19:10 tijo kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
Aug 27 09:19:10 tijo kernel: ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based)
Aug 27 09:19:10 tijo kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
Aug 27 09:19:10 tijo kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Aug 27 09:19:10 tijo kernel: saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Aug 27 09:19:11 tijo kernel: msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
Aug 27 09:19:11 tijo kernel: msp3400 1-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect
Aug 27 09:19:11 tijo kernel: tveeprom 1-0050: Hauppauge model 32062, rev C182, serial# 7913938
Aug 27 09:19:11 tijo kernel: tveeprom 1-0050: tuner model is LG TAPC H791F (idx 82, type 39)
Aug 27 09:19:11 tijo kernel: tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
Aug 27 09:19:11 tijo kernel: tveeprom 1-0050: audio processor is MSP3445 (idx 12)
Aug 27 09:19:11 tijo kernel: tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
Aug 27 09:19:11 tijo kernel: tveeprom 1-0050: has no radio, has IR remote
Aug 27 09:19:11 tijo kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Aug 27 09:19:12 tijo kernel: ivtv0: Encoder revision: 0x02050032
Aug 27 09:19:12 tijo kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Aug 27 09:19:12 tijo kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Aug 27 09:19:12 tijo kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Aug 27 09:19:12 tijo kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Aug 27 09:19:12 tijo kernel: tuner 1-0061: type set to 39 (LG NTSC (newer TAPC series))
Aug 27 09:19:12 tijo kernel: ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
Aug 27 09:19:12 tijo kernel: ivtv: ==================== END INIT IVTV ====================
Aug 27 09:19:12 tijo kernel: cx2388x v4l2 driver version 0.0.5 loaded
Aug 27 09:19:12 tijo kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Aug 27 09:19:12 tijo kernel: lirc_dev: lirc_register_plugin: sample_rate: 10
Aug 27 09:19:12 tijo lircd-0.8.1-CVS-pvr150[3134]: lircd(all) ready
Aug 27 09:19:13 tijo mysqld_safe[3723]: started
Aug 27 09:19:13 tijo mysqld[3726]: /usr/sbin/mysqld: ready for connections.
Aug 27 09:19:13 tijo mysqld[3726]: Version: '4.0.22-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 Source distribution
Aug 27 09:19:14 tijo /etc/mysql/debian-start[3743]: Checking for crashed MySQL tables.
Aug 27 09:19:14 tijo input.agent[3787]: tsdev: already loaded
Aug 27 09:19:14 tijo kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Aug 27 09:19:14 tijo kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 27 09:19:14 tijo isapnp.rc[3802]: 8250_pnp: loaded sucessfully
Aug 27 09:19:14 tijo isapnp.rc[3802]: 8250_pnp: loaded sucessfully
Aug 27 09:19:15 tijo pci.agent[3913]: amd64-agp: already loaded
Aug 27 09:19:15 tijo kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 27 09:19:15 tijo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 27 09:19:15 tijo pci.agent[3941]: shpchp: loaded successfully
Aug 27 09:19:16 tijo pci.agent[3995]: ohci1394: already loaded
Aug 27 09:19:17 tijo pci.agent[4057]: ivtv: already loaded


Thanks!


Last edited by bigshwjoe on Sun Aug 27, 2006 9:43 am, edited 1 time in total.
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sun Aug 27, 2006 9:11 am 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
What kind of input does the PVR card have? Cable straight from the wall or is there some kind of cable box in the mix?

Under "Input Connections" in mythtv-setup did you associate the "Video Source" with the input you're using and only that?

See the troubleshooting pages on the wiki for more: http://www.knoppmythwiki.org/index.php?page=TroubleShooting
Especially this one which covers most of these "failure to tune" issues: http://www.knoppmythwiki.org/index.php?page=BlackScreenWatchingTV

OBTW - Good work on the logfile extract. It shows that your card and tuner is being recognized properly and the firmware is getting loaded. Keep it up! :D
Top
 Profile  
 
bigshwjoe
 Post subject:
PostPosted: Sun Aug 27, 2006 9:22 am 
Offline
Joined: Sun Apr 30, 2006 2:39 pm
Posts: 3
Ahhhhh, thanks tjc! I had setup the card in mythtv-setup but I forgot to associate the video source with it.

Thank you so much, everything seems to be working now :)
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sun Aug 27, 2006 9:26 am 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Don't feel bad, my first time out of the box I associated the video source with all the inputs. :oops: The MythTV documentation around setup stuff is less than crystal clear.

Anyway, now you get to point the next newbie with this kind of problem to the appropriate troubleshooting pages. ;-)

OBTW - You might also want to edit your title to add " - solved".
Top
 Profile  
 
bigshwjoe
 Post subject:
PostPosted: Sun Aug 27, 2006 9:45 am 
Offline
Joined: Sun Apr 30, 2006 2:39 pm
Posts: 3
hehe, well thank you again. I updated the title as suggested.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 


Board index Linux Installation

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu