| LinHES Forums http://forum.linhes.org/ |
|
| R5E50 Leadtek Winfast 2000 sound problems http://forum.linhes.org/viewtopic.php?f=14&t=14226 |
Page 1 of 1 |
| Author: | prometheus [ Fri Feb 16, 2007 10:37 pm ] |
| Post subject: | R5E50 Leadtek Winfast 2000 sound problems |
I have updated and can not get the sound to work. I have tried the alsaconf and alsamixer trick. I can get sound by manually unmuting the line in and master volumes in alsamixer, but mythtv will not control the muting/unmuting anymore. I have tried that v4l2-ctl -c mute=0 trick also with no luck. I also find it strange that my dmesg tells me that the bttv module is using tuner type 5 when I am telling it to use 2 (NTSC). What is up with that? Help anyone? Please? I am specifiying this in /etc/modules: Code: bttv card=34 tuner=2 tuner type=2 Code: root@mythtv:~# dmesg | grep bttv [/code]
bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:02:06.0, irq: 19, latency: 64, mmio: 0xebc00000 bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606 bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00bf737f [init] bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok input: bttv IR (card=34) as /class/input/input1 bttv-input: bttv IR (card=34) detected at pci-0000:02:06.0/ir0 The bttv_* interface is obsolete and will go away, |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|