I have KM set up. TV watching/recording works fine. What I really want to use KM for is to browse a network attached storage box which has a folder containing all my downloaded .avi, divix, xvid, wmv and .flv files. This NAS is running "NasLite 2" from server elements and is a wide open network share, i.e. no user account control / passwords available. I've tried setting up a samba mount of the file via ssh but I get an error "you specified an invalid share name". The NAS has two HDDs which NASLite names "Disk-0" and "Disk-1". I have named the NAS "Fileserver" w/ a 192.168.X.XX IP.

I've tried "smbmount //Fileserver/Disk-0/myvideo /myth/video/myvideo" and "smbmount //192.168.X.XX/Disk-0/myvideo /myth/vidoe/myvideo". I'm asked for a password, but the NAS does not have password capability so I leave it blank and hit enter. Then I get the error above.

How can I set up KM to allow me use the remote to browse that folder on the NAS and stream the files on it?

_________________
sony PCV-RX550 with PVR-150 and GF6800GT
2.4 Ghz cpu and 512 ram.

Yes KnoppMyth can do that, even though you are not prompted for a userid/password on Windows chances are it is logging you in with "guest". Try running the smbount command using options to specify username of "guest"

I use AutoFS with samba

Check the samba and autofs howto on the KnoppMythWIKI

Thanks for the reply. I'll give that a shot and have a look at AutoFS as well.

_________________
sony PCV-RX550 with PVR-150 and GF6800GT
2.4 Ghz cpu and 512 ram.

This has allowed me to browse my NAS from both my FE & BE.

http://mysettopbox.tv/phpBB2/viewtopic.php?t=15037&highlight=

_________________
MBE : P4 2.4Gz GA-8IPE1000, 512M, MX440-T8X, 250G WD HDD Cards : PVR-350,PVR-250,HD-3000

MFE : 1GZ Via EPIA-M, 394M, Via onboard video, 1 80G Wd hdd, 1 120G WD Hdd Card : PVR-350

R5E50