| LinHES Forums http://forum.linhes.org/ |
|
| hangs during file copy (install 23%) http://forum.linhes.org/viewtopic.php?f=14&t=8848 |
Page 1 of 1 |
| Author: | dstren [ Mon Mar 06, 2006 1:01 pm ] |
| Post subject: | hangs during file copy (install 23%) |
My installation hangs during install after partitioning. copies files to about 23% and stops. 1.33Ghz AMD 2x 40gb HD I fdsk'd both hd's before install, and that gets me past the partitioning, but halts after partially copying files. Any help would be appreciated. |
|
| Author: | cesman [ Mon Mar 06, 2006 1:53 pm ] |
| Post subject: | |
Bad burn. Media and drive incompatibilty. Try burning at a lower speed. |
|
| Author: | entourage [ Mon Mar 06, 2006 2:11 pm ] |
| Post subject: | |
I'll also mention you might want to check your RAM. I've seen on Windows machines, that they do partial loads and then halt. Replacing the RAM fixed the problem... Just a simple suggestion. |
|
| Author: | zverg [ Mon Mar 06, 2006 2:59 pm ] |
| Post subject: | |
I'm having basically the same problem, it keeps stopping "copying files" at 30%. I'll try reburning the CD. |
|
| Author: | zverg [ Mon Mar 06, 2006 3:18 pm ] |
| Post subject: | |
Actually now it is at 56% but that's definitely taking forever. I'm burning another copy of the iso right now. |
|
| Author: | tjc [ Mon Mar 06, 2006 8:12 pm ] |
| Post subject: | |
Add the "testcd" option to your boot line to make sure it's good. Even if you burn without errors and can read/verify a CD on another drive there may be drive to drive issues with CDs you've burned yourself. The usual suggestions involve low speed burning, trying different media, ... |
|
| Author: | aovermy [ Fri Mar 10, 2006 11:26 am ] |
| Post subject: | |
Curiously, I was having this same problem. I downloaded the iso, burned it to a CD and got this problem. I repeated the burn and try cycle 3 times on 2 different media manufacturers and 2 different PCs with 2 different burners. Each time I had the same problem. I ran md5sums and I had a good file too. I finally ticked the box finalize media after writing in cdburnerxp and I didn't see this again (whether that actually fixed the problem or not I don't know, maybe some other variable was at work). I was definitely able to install to 3 different machines with the finalized CD. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|