| LinHES Forums http://forum.linhes.org/ |
|
| R5C7 Cannot open card TwinhanDTV ATSC & VisionDTV Sat Ex http://forum.linhes.org/viewtopic.php?f=15&t=10856 |
Page 1 of 1 |
| Author: | attendant_one [ Sun Jul 16, 2006 4:30 pm ] |
| Post subject: | R5C7 Cannot open card TwinhanDTV ATSC & VisionDTV Sat Ex |
Now let me start by saying that R5C7 found the cards from the start. I see them listed when the system boots. Others have these cards working fine(after some work). I have read pages of post on them I still can't figure out why in the setup screen I get a "Can not open card" error. for DVB0 & DVB1. I am going to start another install from scratch this week and anything info I can get will be most helpful. P.S. I don't know the answers to the following questions: Is the backend keeping the front end from seeing the cards? Is the IP 127.0.0.1 setup correct for a single system? Should I be worried about permissions? Please help, I don't want to buy Winblows XP just to get these cards working. Biostar M7NCD Pro, AMD Athlon 1ghz, 512k ram, 120 gb Seagate Barracuda. |
|
| Author: | bearwood [ Sun Jul 16, 2006 11:52 pm ] |
| Post subject: | |
I beleive you need to make sure the backend is not running to install the cards ( /usr/bin/mythbackend stop ) In answer to your questions I beleive so Yes No, not for an install. |
|
| Author: | attendant_one [ Tue Jul 18, 2006 5:54 pm ] |
| Post subject: | |
Thanks bearwood I tried setup with the backend off and on and no luck. I also found this post http://mysettopbox.tv/phpBB2/viewtopic.php?t=10030 I checked dmesg and found out I have the same problem. Now I need to know why that solution won't work for me. |
|
| Author: | bearwood [ Thu Jul 20, 2006 8:36 pm ] |
| Post subject: | |
I'm just playing around on another box trying to get a frontend working and on this box which has a Avermedia 771 card installed I had to modprobe dvb-bt8xx echo dvb-bt8xx >> /etc/modules to get the "Can not open card" error to go away. Hopefully you have got past this point. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|