| LinHES Forums http://forum.linhes.org/ |
|
| R5B7 moto 6200 firewire -- audio is static - RESOLVED! http://forum.linhes.org/viewtopic.php?f=15&t=10901 |
Page 1 of 1 |
| Author: | trimtab [ Thu Jul 20, 2006 3:22 pm ] |
| Post subject: | R5B7 moto 6200 firewire -- audio is static - RESOLVED! |
I have successfully connected a moto 6200 via Firewire to a R5B7 Knoppmyth box. It can change channels, get and record video with correct audio some of the time, but it also may get correct video with noisy audio clicks/static. Anyone else seen this? I am for the moment am not using S/PDIF out for audio. The audio is connected to a stereo via standard analog RCA audio jacks. I am wondering if this is what 5.1 digital sound pushed through 2 analog channels would sound like. There is no resemblence to the actual audio. Just noise. This problem is not consistent. Sometimes you'll get correct audio on a given channel and at other times static. Thanks in advance. |
|
| Author: | Xsecrets [ Thu Jul 20, 2006 9:49 pm ] |
| Post subject: | |
could be a 5.1 issue. I had something similar long time ago when I wasn't using spdif, but I didn't get static I just got the rear channel, so I would just get like crowd noise or music or other such nonsense. |
|
| Author: | trimtab [ Sat Aug 05, 2006 7:11 pm ] |
| Post subject: | |
Yes, it is a pass through issue. If you use firewire to obtain HDTV on system an analog audio out make sure that both: Enable AC3 to SPDIF passthrough Enable DTS to SPDIF passthrough are unchecked in the Setup->General->Audio screen. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|