LinHES Forums http://forum.linhes.org/ |
|
Picture quality http://forum.linhes.org/viewtopic.php?f=15&t=17132 |
Page 1 of 1 |
Author: | yemo [ Mon Oct 29, 2007 2:56 pm ] |
Post subject: | Picture quality |
Here's some basics about my setup. I'm very likely leaving out something critical. If so please let me know. I have both a myth box and a Sony DHG-HDD250 DVR connected to a 55" Sony LCD projection. The Myth box is outputting through an 5200 Nividia card through a DVI/HDMI cable at the TVs native resolution using the modeline: Modeline "1344x728" 74.160 1344 1424 1464 1648 728 729 734 750 -hsync -vsync Here's the issue: Recording from the same OTA input, There is a noticeable difference in the picture quality between the two boxes, especially in solid or near-solid backgrounds, like sky, or a wall, anything that has blocks of solid color, the myth box seems more grainy, more noisy, I don't know what the correct term is, but the picture isn't as crisp as the Sony box is. I've tried several different modelines, which make a difference in the size of the picture and overscan to a degree, but the graininess remains. I am running R5F1 currently. Any thoughts or suggestions would be appreciated. yemo |
Author: | Girkers [ Mon Oct 29, 2007 9:38 pm ] |
Post subject: | |
Yemo, You may want to check your profiles as I think the defaults are set for good old analog. Check the settings under: Utilities/Setup -> Setup -> TV Settings -> Recording Profiles -> MPEG-2 Encoders and make sure that you have them set to the signal, eg. SD is 720x480 (NTSC) or 720x576 (PAL) |
Author: | yemo [ Tue Oct 30, 2007 7:24 am ] |
Post subject: | |
Girkers, I don't think that's the issue. I'm definitely recording digital signals. I've got both boxes set up to only receive digital channels. A Because of that, I'm 99% sure this is something with displaying the picture rather than receiving or transcoding. Thanks for the help. |
Author: | mogator88 [ Tue Oct 30, 2007 7:45 am ] |
Post subject: | |
Is 1344x728 the native resolution of the TV? If not, that could be the problem or part of it. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |