LinHES Forums http://forum.linhes.org/ |
|
Point of view atom 330 ION HDTV http://forum.linhes.org/viewtopic.php?f=15&t=20679 |
Page 1 of 1 |
Author: | dirtyharryiv [ Sat Dec 12, 2009 12:01 pm ] |
Post subject: | Point of view atom 330 ION HDTV |
Hi! iam using a Point of view atom 330 / ion based mainboard with a skystar hd2 pci card. the distribution is linHES r6. MKV and other hd content works fine, but if i try to watch HDTV in mythtv (SDTV is fine too) the video hangs every second. the cpu usage is at 100%. can someone help me please?! iam trying to get this work for a week now, with no result! if i try this: "mplayer -vo vdpau dvb://ARTEHD" it works either. mplayer is idle for about 10 min. and then he says "Video: NoVideo" and he just play the sound. thanks in advance for your help and please excuse my poor english wbr harry |
Author: | graysky [ Sat Dec 12, 2009 12:14 pm ] |
Post subject: | |
I'm not familiar with that board. What is the graphics GPU on it and is it VDPAU enabled? If so, do you have mythtv/mplayer setup to use VDPAU? That will offload the vast majority of your video decoding from the CPU to the GPU. |
Author: | dirtyharryiv [ Sat Dec 12, 2009 1:19 pm ] |
Post subject: | |
its the Nvidia ION chipset and yes, vdpau is enabled. i think mplayer uses vdpau out of the box on linhes r6, because i can watch mkv files at ca. 25% cpu usage. when i tried this with mplayer(without vdpau support) on a different distribution the usage is at ca. 100%. when i watch hdtv with the mythtvfrontend the cpu load is 100% and the video playback hangs every second. wich player uses the mythfrontend for livetv? can add vdpau support to mythfrontend? i read a lot of post (in this and in other forums) where people got it to work with this mainboard. |
Author: | graysky [ Sat Dec 12, 2009 1:29 pm ] |
Post subject: | |
If I'm not mistaken there are special packages of mythtv with vdpau compiled in... you might wanan just upgrade to mythtv 0.22 which almost certainly does. See this thread. |
Author: | dirtyharryiv [ Sat Dec 12, 2009 3:14 pm ] |
Post subject: | |
graysky wrote: If I'm not mistaken there are special packages of mythtv with vdpau compiled in... you might wanan just upgrade to mythtv 0.22 which almost certainly does. See this thread.
I´ll try it this night when iam at home! thanks a lot! dirtyharry |
Author: | dirtyharryiv [ Thu Dec 17, 2009 5:42 pm ] |
Post subject: | |
thanks a lot!!! the thread mentioned above helped me!!! wbr harry |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |