| LinHES Forums http://forum.linhes.org/ |
|
| can only access 1 channel with WATCH TV button - RESOLVED http://forum.linhes.org/viewtopic.php?f=15&t=9901 |
Page 1 of 1 |
| Author: | neutron68 [ Wed May 03, 2006 12:03 pm ] |
| Post subject: | can only access 1 channel with WATCH TV button - RESOLVED |
At present I can watch live tv with the WATCH TV button, but can only access 1 single DTV channel (and it's sub-channels - such as 11_1 and 11_2). The channel I am limited to is the default start channel that you set in the mythtv-setup windows. If I set the default start channel to 2_1, I can only view 2_1. If I set the default start channel to 11_1, I can only view 11_1 and 11_2. Scheduled recordings seem to work fine on all DTV channels. With the newest nvidia driver 8756, I get live tv ok with the mpeg2 decoder set to either - VxMC, or standard. With the previous nvidia driver, I could not get live tv when the VxMC decoder was selected. Eric |
|
| Author: | cesman [ Wed May 03, 2006 6:29 pm ] |
| Post subject: | |
Anything in the logs? |
|
| Author: | neutron68 [ Wed May 03, 2006 7:44 pm ] |
| Post subject: | logs? please tell me where to find them |
cesman wrote: Anything in the logs?
I'd be glad to look and report back but I have no idea where any logs are. Let me know and I'll go look! Also, is there a way to copy text from a shell window and paste it into this forum? The standard Ctrl-c, Ctrl-v does not work! Thanks! Eric |
|
| Author: | tjc [ Wed May 03, 2006 7:54 pm ] |
| Post subject: | |
http://www.knoppmythwiki.org/index.php?page=CheckingLogFiles Using what? Unix to unix under X, left button, hold sweep, release, to grab. Middle button to paste. Using putty, grab is the same, right button pastes. When you cross the line from putty to/from MS-Windows you use the MS mouse commands on the MS side. |
|
| Author: | neutron68 [ Fri May 05, 2006 8:43 pm ] |
| Post subject: | mythbackend.log |
Here is a snip from the mythbackend.log At the start of this session, I was watching an HDTV show on OTA channel 2_1 with WATCH TV button. When I tried to switch channels with the arrow keys, the errors started. First I tried to change down to analog channel 2 and the up to analog channel 4. At the end of this I hit the ESC key to end the experiment. Code: 2006-05-05 21:07:34.647 DVB#0 ERROR - Could not find dvb tuning parameters for mplex 32767
2006-05-05 21:07:34.653 DVB#0 ERROR - Failed to get channel options for channel 2 2006-05-05 21:07:34.655 TVRec(1) Error: Failed to set channel to 2. 2006-05-05 21:07:34.879 Finished recording The Video Game Revolution: channel 1021 2006-05-05 21:07:35.632 DVB#0 DVB SI Table Parser Started 0: start_time: 2929.449 duration: 26.432 1: start_time: 2929.409 duration: 26.438 2: start_time: 2929.409 duration: 26.472 3: start_time: 2929.409 duration: 26.472 stream: start_time: 32548.989 duration: 294.138 bitrate=17621 kb/s 2006-05-05 21:07:38.500 AFD: Opened codec 0x816bf50, id(MPEG2VIDEO) type(Video) 2006-05-05 21:07:38.549 AFD: Opened codec 0x8191170, id(AC3) type(Audio) 2006-05-05 21:07:38.553 AFD: Opened codec 0x819bd30, id(AC3) type(Audio) 2006-05-05 21:07:38.555 AFD: Opened codec 0x8177ba0, id(AC3) type(Audio) 2006-05-05 21:07:42.353 DVB#0 ERROR - Could not find dvb tuning parameters for mplex 32767 2006-05-05 21:07:49.861 TVRec(1) Error: Failed to set channel to 4. 2006-05-05 21:07:49.921 Finished recording The Video Game Revolution: channel 1021 2006-05-05 21:07:50.673 DVB#0 DVB SI Table Parser Started 0: start_time: 5859.060 duration: -9223372036854.775 stream: start_time: 65100.668 duration: -9223372036854.775 bitrate=0 kb/s 2006-05-05 21:07:53.614 AFD: Opened codec 0x81ac7b0, id(MPEG2VIDEO) type(Video) 2006-05-05 21:07:53.626 NVP: Disabling Audio, params(-1,-1,-1) 2006-05-05 21:07:53.662 NVP: Disabling Audio, params(0,-1,-1) 2006-05-05 21:07:55.663 DVB#0 ERROR - Could not find dvb tuning parameters for mplex 32767 2006-05-05 21:07:55.667 DVB#0 ERROR - Failed to get channel options for channel 4 2006-05-05 21:07:55.668 TVRec(1) Error: Failed to set channel to 4. 2006-05-05 21:07:55.687 Finished recording The Video Game Revolution: channel 1021 2006-05-05 21:07:56.434 DVB#0 DVB SI Table Parser Started 0: start_time: 5859.060 duration: -9223372036854.775 stream: start_time: 65100.668 duration: -9223372036854.775 bitrate=0 kb/s 2006-05-05 21:07:59.366 AFD: Opened codec 0x819bcb0, id(MPEG2VIDEO) type(Video) 2006-05-05 21:07:59.372 NVP: Disabling Audio, params(-1,-1,-1) 2006-05-05 21:07:59.374 NVP: Disabling Audio, params(0,-1,-1) 2006-05-05 21:08:01.183 TVRec(1): Changing from WatchingLiveTV to None added 5-6-06 As an additional note, I just deleted the tuner card, re-added it and rescanned all the local channels. This time I named all my digital channels with a dash between the main channel and the sub channel (example: 4-1, 4-2, etc) rather than an underscore as before. I found I am able to key in the channel numbers (example: 11-1) and change channels. Once on a channel I can tune within the sub-channels using the up/down arrows, but I cannot change off the main digital channel. (example: if I'm on 11-1, I can't simply change down to 9-1 with the arrows) added 5-7-06 I've also observed in the transport editor screen that there are transport items with 0,0,0,0 for data. Could this be a problem? Can I purge these transport entries somehow? added 5-15-06 Over the weekend I learned that there is a bug with the apt-get procedure that has been known since August 2005 - but never fixed. (The sources.list file sends apt-get off to get files from the unstable file folders on the various servers. Thus using apt-get can blow up your whole install and cause a complete reload.) I had used apt-get to install the Firefox web browser when I set up my machine a month ago. I wonder if some of my unknown problems have been caused by the unfixed apt-get bug??? Eric |
|
| Author: | neutron68 [ Sun May 21, 2006 12:38 am ] |
| Post subject: | situation resolved - believed cause is apt-get command |
I think the install I was detailing above was screwed up because of the apt-get bug. I reinstalled the R5B7 cd same as before but did not use apt-get for anything this time. Channels change correctly now. Programs record ok. Live tv works fine. So, BEWARE using apt-get in KnoppMyth. The sources.list file embedded in the KnoppMyth install cd sends you to unstable file sources that will blow up your installation and require reinstall to fix! Good luck! Eric |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|