| LinHES Forums http://forum.linhes.org/ |
|
| Blank recordings -- SOLVED http://forum.linhes.org/viewtopic.php?f=17&t=10722 |
Page 1 of 1 |
| Author: | sjasmund [ Wed Jul 05, 2006 1:56 pm ] |
| Post subject: | Blank recordings -- SOLVED |
Hello, I just loaded R5C7 on a new hard drive (fresh install). I've got almost everything working except my recordings. If I watch live TV, I can go to the Media Library and watch what was recorded. However, if I record something from the scheduler, the file in the Media Library is blank. I'm sure I've missed something simple but, going through my notes for previous installs I can't figure out what it is. Thanks, Scott |
|
| Author: | mjl [ Wed Jul 05, 2006 9:26 pm ] |
| Post subject: | |
Hi sjasmund, Do alt + s and check your settings, maybe you are sending it somewhere you don't want to be. Mike |
|
| Author: | sjasmund [ Wed Jul 05, 2006 9:33 pm ] |
| Post subject: | |
I've been through that forwards and backwards and nothing is jumping out at me. Is there a specific area I should be looking? Thanks, scott |
|
| Author: | sjasmund [ Thu Jul 06, 2006 12:32 am ] |
| Post subject: | Blank recordings -- SOLVED |
I figured it out... I just needed to go back to the Input Connections and set everything to NONE except Tuner0. Thanks, Scott |
|
| Author: | bluetone [ Wed Jul 26, 2006 12:44 pm ] |
| Post subject: | Blank recordings -- SOLVED |
Hi sjasmund, I performed a clean install of R5C7, and I am having this same issue, as you described, however, mine is intermittent. I can schedule recordings, and sometimes I have a recording, and sometimes not. I only have one tuner, and am using only one input source from that tuner. All other are set (NONE). Code from DMESG: $ dmesg | grep bttv bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 10, latency: 32, mmio: 0xdddfe000 bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [card=78,insmod option] bttv0: gpio: en=00000000, out=00000000 in=003fffff [init] bttv0: using tuner=5 bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 The bttv_* interface is obsolete and will go away, Anyone know: Should I have 2, (bttv and bttv0), bttv's here? Is this normal when you have 1 tuner? I don't remember what this looked like on prior installs. This appears to be my only, major unresolved issue, with the R5C7 clean install. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|