LinHES Forums
http://forum.linhes.org/

Does R5E50 lossless transcode work for both SDTV and HDTV?
http://forum.linhes.org/viewtopic.php?f=17&t=13438		 Page 1 of 1
Author:  siasl [ Thu Jan 11, 2007 1:15 pm ]
Post subject:  Does R5E50 lossless transcode work for both SDTV and HDTV?
I have an R5C7 system with PVR-x50 and HD-3000 cards. Lossless transcode works for MPEG2 files from the PVR cards. Transcode will run on HDTV files IF I do not have a cutlist. As soon as I try to cut commercials on the HDTV files I get a "No more queue slots!" error in the backend log.

I can have a cutlist for the files generated by the PVR cards.

My system works very well and is very stable so I'm hesitant to upgrade to R5E50 if it is still having lossless transcode issues with either SDTV mpeg2 or HDTV mpeg2 files.

I'll bite the bullet and upgrade if R5E50 works for BOTH SDTV and HDTV mpeg2 files.

Thanks
Author:  ceenvee703 [ Thu Jan 11, 2007 3:07 pm ]
Post subject: 
My R5D backend will do cut lists and losslessly transcode both SD and HD recordings, so I'm pretty sure the E series does it too.
Author:  siasl [ Thu Jan 11, 2007 5:42 pm ]
Post subject: 
R5D ? I thought I saw some posts here that lossless was broken in R5D1 ?

BTW. Does R5E50 include the .20 mythtv updates? I see the changelog says
".20 fixes". Is that the same thing?

Thanks
Author:  ceenvee703 [ Thu Jan 11, 2007 8:02 pm ]
Post subject: 
Ack, you're right, I thought I was on D but apparently it's R5C7. Sorry for the misinformation. (And yes, I believe that ".20 fixes" means incorporating fixes since the .20 release)
Author:  siasl [ Fri Jan 12, 2007 8:23 am ]
Post subject: 
Hmmmmm. You're on R5C7 and can transcode/comm cut? I wonder what could have broke on mine?

Log :

2007-01-12 08:18:48.179 Transcode Running for 206 (INHD) "Fri Jan 12 08:13:00 2007": 197.1 MB => 0 bytes (Autodetect)
2007-01-12 08:18:48.184 Transcode Starting for 206 (INHD) "Fri Jan 12 08:13:00 2007": 197.1 MB (Autodetect)
2007-01-12 08:18:48.396 Using runtime prefix = /usr
2007-01-12 08:18:48.415 New DB connection, total: 1
2007-01-12 08:18:48.423 Enabled verbose msgs: important
2007-01-12 08:18:48.428 New DB connection, total: 2
2007-01-12 08:18:48.430 Connected to database 'mythconverg' at host: localhost
2007-01-12 08:18:48.436 Transcoding from /myth/tv/6206_20070112081400.mpg to /myth/tv/6206_20070112081400.mpg.tmp
2007-01-12 08:18:48.463 Connecting to backend server: 192.168.2.10:6543 (try 1 of 5)
2007-01-12 08:18:48.486 Using protocol version 26
2007-01-12 08:18:48.496 MainServer::HandleAnnounce Monitor
2007-01-12 08:18:48.505 adding: mythtv as a client (events: 0)
0: start_time: 8373.011 duration: 9.327
1: start_time: 8372.974 duration: 9.365
2: start_time: 8372.974 duration: -9223372036854.775
stream: start_time: 93033.044 duration: 104.054 bitrate=15887 kb/s
2007-01-12 08:18:51.722 AFD: Opened codec 0x80e5f00, id(MPEG2VIDEO) type(Video)
2007-01-12 08:18:51.725 AFD: Opened codec 0x80e6480, id(AC3) type(Audio)
2007-01-12 08:18:51.735 AFD: Opened codec 0x80e6a00, id(AC3) type(Audio)
2007-01-12 08:18:51.741 New DB connection, total: 3
2007-01-12 08:18:51.756 Connected to database 'mythconverg' at host: localhost
2007-01-12 08:18:51.765 Switching to MPEG-2 transcoder.
2007-01-12 08:18:51.789 Opening /myth/tv/6206_20070112081400.mpg
2007-01-12 08:18:51.887 Input #0, mpegts, from '/myth/tv/6206_20070112081400.mpg':
2007-01-12 08:18:51.889 Duration: N/A, bitrate: N/A
2007-01-12 08:18:51.890 Stream #0.0[0x800], 29.97 fps(r): Video: mpeg2video, yuv420p, 1920x1080, 25000 kb/s
2007-01-12 08:18:51.891 Stream #0.1[0x801](eng): Audio: ac3, 48000 Hz, 5:1, 384 kb/s
2007-01-12 08:18:51.892 Stream #0.2[0x802](spa): Audio: ac3, 48000 Hz, stereo, 96 kb/s
2007-01-12 08:18:51.926 #0 PTS:25:50:33.460 Delta: 0.0ms queue: 12
2007-01-12 08:18:51.928 #1 PTS:25:50:33.442 Delta: 17.3222ms queue: 2
2007-01-12 08:18:51.947 #2 PTS:25:50:33.459 Delta: 0.655556ms queue: 2
2007-01-12 08:18:52.145 Deadlock detected. One buffer is full when
the other is empty! Aborting
Author:  cecil [ Sat Jan 13, 2007 10:07 pm ]
Post subject: 
R5E50 has the second latest -fixes. Both SD and HD lossless work.
Author:  kcossabo [ Tue Feb 13, 2007 3:08 pm ]
Post subject:  How to
Three dumb questions.

1) I assume to 'enable it' I
Utilities/Setup->Setup->TV Settings->Recording Profiles->Transcoders->Autodetect from MPEG2
and check the Lossless Transcoding checkbox.

But then what? if I check cut commercials it just works?

2) can I run this on a file/recording that has already been completed.

3) will this work for MPEG2-TS (captured via Firewire from a Moto 6200)?

thanks.
Author:  tjc [ Tue Feb 13, 2007 6:23 pm ]
Post subject: 
Should work for any MPEG-2 recording.

Starting watching the program, edit the cut list, select transcode.

Searching for "edit the cut list" should find you several postings like this: http://mysettopbox.tv/phpBB2/viewtopic.php?t=13618&highlight=edit+cut+list at least a couple of them have fairly detailed instructions.

You can select transcoding either from the OSD memu while watching the program, or from the recordings menu. I've got "arrow accelerators" enabled so I go to the show in the recorded programs list, hit right arrow, arrow down to "job options", right arrow, arrow down to transcode, right arrow, and select "default".
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/