LinHES Forums :: View topic - Composite Input with Dish

Here is the relevant part of the log...

Code:

2007-05-17 19:00:02.963 TVRec(4): Changing from None to RecordingOnly
2007-05-17 19:00:03.035 Channel::GetCurrentChannelNum(8102): Failed to find Channel '8102'
2007-05-17 19:00:03.036 Channel(/dev/video0)::TuneTo(8102): Error, failed to find channel.
2007-05-17 19:00:03.037 TVRec(4) Error: Failed to set channel to 8102. Reverting to kState_None
2007-05-17 19:00:03.037 TVRec(4): Changing from RecordingOnly to None
2007-05-17 19:00:03.040 Finished recording The Office "The Job, Parts 1 and 2": channel 10102
2007-05-17 19:00:03.057 scheduler: Finished recording: The Office "The Job, Parts 1 and 2": channel 10102

Here is part of it from a working recording I did earlier this week.

Code:

2007-05-14 20:00:02.935 TVRec(4): Changing from None to RecordingOnly
2007-05-14 20:00:03.050 Started recording: Heroes "Landslide": channel 1003 on cardid 4, sourceid 1
2007-05-14 20:00:03.099 scheduler: Started recording: Heroes "Landslide": channel 1003 on cardid 4, sourceid 1
2007-05-14 21:01:00.349 TVRec(4): Changing from RecordingOnly to None
2007-05-14 21:01:00.357 Finished recording Heroes "Landslide": channel 1003
2007-05-14 21:01:00.361 Reschedule requested for id 0.
2007-05-14 21:01:00.364 scheduler: Finished recording: Heroes "Landslide": channel 1003
2007-05-14 21:01:00.454 Scheduled 40 items in 0.1 = 0.01 match + 0.08 place
2007-05-14 21:01:00.456 Finished recording Heroes "Landslide": channel 1003
2007-05-14 21:01:00.506 scheduler: Scheduled items: Scheduled 40 items in 0.1 = 0.01 match + 0.08 place
2007-05-14 21:01:00.513 scheduler: Finished recording: Heroes "Landslide": channel 1003

Now, I don't have an IR Blaster yet. I forgot I would need one and just ordered it when I got home, so it will be here in a couple of days. Is this producing this error (and subsequently just not recording anything) because it thinks it needs to change the channel but can't and will this problem go away once I have the IR Blaster??

Thanks!

Author:	thrillhouse [ Fri May 18, 2007 6:41 am ]
Post subject:	Composite Input with Dish
I just moved back home for the summer and the place I am living has Dish Network. Its a two input satellite receiver so I used RCA plugs to hook up my PVR-500. Watching regular TV works fine through both tuners but if I try and record something, I get a file not found when I go to watch the program. This box worked absolutely flawlessly while using regular cable when I was back at school. Any ideas whats going on here?

Author:	thrillhouse [ Fri May 18, 2007 9:12 am ]
Post subject:
Also, the recordings say they don't have any length of time. For example, last nights The Office says it goes from 7:00PM - 7:00PM.

Author:	thrillhouse [ Fri May 18, 2007 10:10 am ]
Post subject:
Here is the relevant part of the log... Code: 2007-05-17 19:00:02.963 TVRec(4): Changing from None to RecordingOnly 2007-05-17 19:00:03.035 Channel::GetCurrentChannelNum(8102): Failed to find Channel '8102' 2007-05-17 19:00:03.036 Channel(/dev/video0)::TuneTo(8102): Error, failed to find channel. 2007-05-17 19:00:03.037 TVRec(4) Error: Failed to set channel to 8102. Reverting to kState_None 2007-05-17 19:00:03.037 TVRec(4): Changing from RecordingOnly to None 2007-05-17 19:00:03.040 Finished recording The Office "The Job, Parts 1 and 2": channel 10102 2007-05-17 19:00:03.057 scheduler: Finished recording: The Office "The Job, Parts 1 and 2": channel 10102 Here is part of it from a working recording I did earlier this week. Code: 2007-05-14 20:00:02.935 TVRec(4): Changing from None to RecordingOnly 2007-05-14 20:00:03.050 Started recording: Heroes "Landslide": channel 1003 on cardid 4, sourceid 1 2007-05-14 20:00:03.099 scheduler: Started recording: Heroes "Landslide": channel 1003 on cardid 4, sourceid 1 2007-05-14 21:01:00.349 TVRec(4): Changing from RecordingOnly to None 2007-05-14 21:01:00.357 Finished recording Heroes "Landslide": channel 1003 2007-05-14 21:01:00.361 Reschedule requested for id 0. 2007-05-14 21:01:00.364 scheduler: Finished recording: Heroes "Landslide": channel 1003 2007-05-14 21:01:00.454 Scheduled 40 items in 0.1 = 0.01 match + 0.08 place 2007-05-14 21:01:00.456 Finished recording Heroes "Landslide": channel 1003 2007-05-14 21:01:00.506 scheduler: Scheduled items: Scheduled 40 items in 0.1 = 0.01 match + 0.08 place 2007-05-14 21:01:00.513 scheduler: Finished recording: Heroes "Landslide": channel 1003 Now, I don't have an IR Blaster yet. I forgot I would need one and just ordered it when I got home, so it will be here in a couple of days. Is this producing this error (and subsequently just not recording anything) because it thinks it needs to change the channel but can't and will this problem go away once I have the IR Blaster?? Thanks!

Author:	slowtolearn [ Fri May 18, 2007 11:24 am ]
Post subject:
thrillhouse wrote: Here is the relevant part of the log... Code: 2007-05-17 19:00:02.963 TVRec(4): Changing from None to RecordingOnly 2007-05-17 19:00:03.035 Channel::GetCurrentChannelNum(8102): Failed to find Channel '8102' 2007-05-17 19:00:03.036 Channel(/dev/video0)::TuneTo(8102): Error, failed to find channel. 2007-05-17 19:00:03.037 TVRec(4) Error: Failed to set channel to 8102. Reverting to kState_None 2007-05-17 19:00:03.037 TVRec(4): Changing from RecordingOnly to None 2007-05-17 19:00:03.040 Finished recording The Office "The Job, Parts 1 and 2": channel 10102 2007-05-17 19:00:03.057 scheduler: Finished recording: The Office "The Job, Parts 1 and 2": channel 10102 Here is part of it from a working recording I did earlier this week. Code: 2007-05-14 20:00:02.935 TVRec(4): Changing from None to RecordingOnly 2007-05-14 20:00:03.050 Started recording: Heroes "Landslide": channel 1003 on cardid 4, sourceid 1 2007-05-14 20:00:03.099 scheduler: Started recording: Heroes "Landslide": channel 1003 on cardid 4, sourceid 1 2007-05-14 21:01:00.349 TVRec(4): Changing from RecordingOnly to None 2007-05-14 21:01:00.357 Finished recording Heroes "Landslide": channel 1003 2007-05-14 21:01:00.361 Reschedule requested for id 0. 2007-05-14 21:01:00.364 scheduler: Finished recording: Heroes "Landslide": channel 1003 2007-05-14 21:01:00.454 Scheduled 40 items in 0.1 = 0.01 match + 0.08 place 2007-05-14 21:01:00.456 Finished recording Heroes "Landslide": channel 1003 2007-05-14 21:01:00.506 scheduler: Scheduled items: Scheduled 40 items in 0.1 = 0.01 match + 0.08 place 2007-05-14 21:01:00.513 scheduler: Finished recording: Heroes "Landslide": channel 1003 Now, I don't have an IR Blaster yet. I forgot I would need one and just ordered it when I got home, so it will be here in a couple of days. Is this producing this error (and subsequently just not recording anything) because it thinks it needs to change the channel but can't and will this problem go away once I have the IR Blaster?? Thanks! You need to convince Myth that something is changing the channels - Use /bin/true until you get your blaster http://mysettopbox.tv/phpBB2/viewtopic.php?t=14576

Author:	thrillhouse [ Fri May 18, 2007 12:58 pm ]
Post subject:
Certainly appears that putting /bin/true in the change channel command does the job. Should work like a dream once I get the IR Blaster so I don't have to manually change these channels. Thanks!

LinHES Forums http://forum.linhes.org/

Composite Input with Dish http://forum.linhes.org/viewtopic.php?f=17&t=15271	Page 1 of 1

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/