LinHES Forums
http://forum.linhes.org/

MythWeb can't connect to mythbackend
http://forum.linhes.org/viewtopic.php?f=17&t=15697		 Page 1 of 1
Author:  bburtin [ Sun Jun 24, 2007 7:20 pm ]
Post subject:  MythWeb can't connect to mythbackend
I'm setting up a backend-only server with R5F1 and am hitting a snag. When I try to connect to MythWeb, I get the following error:

Code:
Unable to connect to the master backend at 127.0.0.1:6543.
Is it running?


I can't telnet to that port, but mythbackend is running:

Code:
root@mythtv2:~# ps -ef | grep mythbackend
mythtv    3067     1  0 18:15 ?        00:00:00 /usr/bin/mythbackend --daemon --logfile /var/log/mythtv/mythbackend.log --pidfile /var/run/mythtv/mythbackend.pid


I did notice some strangeness in mythbackend.log (below). It's complaining because I have two capture cards and one input source that aren't connected to anything. I tried running mythtv-setup, but was unable to delete the unused cards and input sources. Whether I hit the D key or chose "delete all capture cards", the extra cards are still hanging around.

Does anyone have any suggestions about further diagnosing the problem?

Boris

Code:
2007-06-24 18:15:21.254 Connected to database 'mythconverg' at host: localhost
2007-06-24 18:15:21.259 EITHelper: localtime offset -7:00:00
2007-06-24 18:15:21.331 TVRec(1) Error: Start channel from DB is empty, setting to '12#1' instead.
2007-06-24 18:15:21.705 New DB connection, total: 3
2007-06-24 18:15:21.710 Connected to database 'mythconverg' at host: localhost
2007-06-24 18:15:21.823 EITHelper: localtime offset -7:00:00
2007-06-24 18:15:21.845 TVRec(2) Error: Problem finding starting channel, setting to default of '3'.
2007-06-24 18:15:22.075 ChannelBase(2) Error: InitializeInputs():
                        Could not get inputs for the capturecard.
                        Perhaps you have forgotten to bind video
                        sources to your card's inputs?
2007-06-24 18:15:22.169 EITHelper: localtime offset -7:00:00
2007-06-24 18:15:22.178 TVRec(3) Error: Problem finding starting channel, setting to default of '3'.
2007-06-24 18:15:22.181 ChannelBase(3) Error: InitializeInputs():
                        Could not get inputs for the capturecard.
                        Perhaps you have forgotten to bind video
                        sources to your card's inputs?
Author:  bburtin [ Mon Jun 25, 2007 6:12 pm ]
Post subject: 
Just did another forum search and came up with this thread, which looks suspiciously similar:

http://www.mysettopbox.tv/phpBB2/viewto ... elete+card

I'll do some more hacking to see if it's the same problem as what I'm having.
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/