| LinHES Forums http://forum.linhes.org/ |
|
| Mythfilldatabase Partial Download http://forum.linhes.org/viewtopic.php?f=17&t=17157 |
Page 1 of 1 |
| Author: | gatorback [ Thu Nov 01, 2007 5:24 pm ] |
| Post subject: | Mythfilldatabase Partial Download |
I installed R5F27, logged in as root, and invoked mythfilldatabase. For some reason, the progress bar indicated that only a partial download of the XML data was performed. A quick check of the system status shows: Code: There's no guide data available!
It also shows that start and finish time \date. The "result:" field is null. For example, only 71 of 240 K would download. I am unsure of what questions are to be asked to diagnose and find root cause of the problem. Suggestions are highily appreciated. |
|
| Author: | slowtolearn [ Thu Nov 01, 2007 6:03 pm ] |
| Post subject: | Re: Mythfilldatabase Partial Download |
gatorback wrote: I installed R5F27, logged in as root, and invoked mythfilldatabase. For some reason, the progress bar indicated that only a partial download of the XML data was performed. Not sure how this is a KM installation issue, but...gatorback wrote: A quick check of the system status shows: Perhaps your internet connection was not up to snuff at the time? Or maybe SD's servers/connections were having troubles?
Code: There's no guide data available! For example, only 71 of 240 K would download. I am unsure of what questions are to be asked to diagnose and find root cause of the problem. |
|
| Author: | gatorback [ Fri Nov 02, 2007 7:41 am ] |
| Post subject: | |
I had this problem in FL and in the Northeast: each site had a different server. This leads me to believe that the problem is not a connection problem. The only commonality is that I used the same install disk, Hauppauge tuner and the SD service. Any diagnostic questions would be appreciated. If anyone has seen this problem before (I tried the search function here), I would like to hear about it. I want to take due diligence before bringing before the senior contributors. |
|
| Author: | slowtolearn [ Fri Nov 02, 2007 8:25 am ] |
| Post subject: | |
Take a look at your /var/log/mythtv/mythbackend.log(s), they may hold a clue. You could always run mythfilldatabase with the "-v all" option - EXTREMELY verbose if it gets data. If you posted a snippet of what you are seeing maybe someone will have a solution. However, if you aren't getting a complete download then my guess is either a connection/server problem, or maybe SD has a bad/incomplete set of data for one of the days of your particular lineup (or perhaps something is incorrect with your SD lineup itself). After ruling out connection problems I would think your best bet would be to contact SD... |
|
| Author: | gatorback [ Mon Nov 12, 2007 4:03 pm ] |
| Post subject: | |
Thank you for the suggestion: this put me on the path to diagnosis. Logs indicated the need to bind video sources to my card's inputs. Code: 2007-11-12 15:08:54.636 ChannelBase(2) Error: InitializeInputs(): Could not get inputs for the capturecard. Perhaps you have forgotten to bind video sources to your card's inputs? I corrected this oversight and rebooted the system. This error is no longer appears in /var/log/mythtv/mythbackend.log: Code: 2007-11-12 16:02:06.259 MainServer::HandleAnnounce Monitor
2007-11-12 16:02:06.262 adding: mythtvhost as a client (events: 0) 2007-11-12 16:02:06.264 MainServer::HandleAnnounce Monitor 2007-11-12 16:02:06.266 adding: mythtvhost as a client (events: 1) 2007-11-12 16:14:02.430 Using runtime prefix = /usr 2007-11-12 16:14:02.649 New DB connection, total: 1 2007-11-12 16:14:02.670 Connected to database 'mythconverg' at host: localhost 2007-11-12 16:14:02.748 Current Schema Version: 1160 Starting up as the master server. 2007-11-12 16:14:02.835 New DB connection, total: 2 2007-11-12 16:14:02.872 Connected to database 'mythconverg' at host: localhost 2007-11-12 16:14:02.878 EITHelper: localtime offset -5:00:00 2007-11-12 16:14:02.951 TVRec(1) Error: Start channel from DB is empty, setting to '63' instead. 2007-11-12 16:14:07.293 New DB connection, total: 3 2007-11-12 16:14:07.300 Connected to database 'mythconverg' at host: localhost 2007-11-12 16:14:07.408 EITHelper: localtime offset -5:00:00 2007-11-12 16:14:07.413 TVRec(2) Error: Start channel from DB is empty, setting to '63' instead. 2007-11-12 16:14:14.268 New DB scheduler connection 2007-11-12 16:14:14.271 Connected to database 'mythconverg' at host: localhost is defined, but isn't attached to a cardinput. 2007-11-12 16:14:15.700 Main::Registering HttpStatus Extension 2007-11-12 16:14:15.702 mythbackend version: 0.20.20070821-1 www.mythtv.org 2007-11-12 16:14:15.703 Enabled verbose msgs: important general 2007-11-12 16:14:15.803 AutoExpire: Found 2 recorders w/max rate of 144 MiB/min 2007-11-12 16:14:15.806 AutoExpire: Required Free Space: 3.1 GB w/freq: 10 min 2007-11-12 16:14:16.284 Reschedule requested for id -1. 2007-11-12 16:14:16.507 Scheduled 0 items in 0.2 = 0.19 match + 0.03 place 2007-11-12 16:14:16.513 Seem to be woken up by USER 2007-11-12 16:17:40.153 MainServer::HandleAnnounce Monitor 2007-11-12 16:17:40.281 adding: mythtvhost as a client (events: 0) 2007-11-12 16:17:40.283 MainServer::HandleAnnounce Monitor 2007-11-12 16:17:40.284 adding: mythtvhost as a client (events: 1) 2007-11-12 16:17:40.288 Reschedule requested for id -1. 2007-11-12 16:17:40.297 MythSocket(818a5f0:-1): writeStringList: Error, socket went unconnected. 2007-11-12 16:17:40.766 Scheduled 0 items in 0.5 = 0.45 match + 0.03 place I ran mythfilldatabase: downloads are continuing to be incomplete, however, I did point my browser and it does come up with EPG data. Unfortunately, it is the data for my Florida home and not my current area. I will start a new thread to address this new problem. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|