Over the past few days I've been struggling with this issue:
I have a DVB-S setup, with a TV Vlaanderen Subscription, which uses Astra1 for transmission of both FTA and encrypted channels.
I had a lot of troubles getting a succesful scan in MythTV -setup, but found out I couldn't get a 'Lock' when the CAM was inserted in the CI.
This setup did work on Kaffeine on the same machine, so hardware-wise it looks OK. In Kaffeine I could watch the encrypted channels without any issues.
When pulling out the CAM module of the CI, starting a new scan, I immediately found lots of channels.
When watching TV, I always (on DVB-T and DVB-C, both FTA-only), I get (LAM), but when trying to watch the DVB-S channels (the FTA ones that is), I only see (l _ _) (the 'l' in small, not in capitals)
Anyone any idea if it is the card, which uses the new seca3 encryption, or if it is MythTV or some module or driver that only MythTV seems to use, that is blocking my lock?
Thanks for the help!
_________________ BE: MSI K8Neo4 - Athlon X2 3800+ - 1GB (2x512) - KnoppMyth R5.5 - Satelco Basic DVB-S PCI card with CI and subsc., DVB-T and DVB-C FTA
FE1: ECS AM2 - AMD Sempron - 512MB - Mythbuntu 8.04 + Mythtv FE
FE2: AppleTV - MythBuntu 8.04
|