Author |
Message |
spideyk21
|
Posted: Tue Sep 29, 2009 7:10 pm |
|
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location:
Roseville, MI
|
Just got around to installing & setting up my Hdhomerun over the weekend. Connected it to a custom built Gray-Hoverman Antenna (which works like a champ so far).
Was able to setup Mythtv without a problem to recognize the unit, and was able to record some test shows. All the shows recorded correctly, but when trying to play them back on my HDTV all I get is a black screen on my 52" Sharp Aquos.
Frontend/Backend Specs.
Knoppmyth R5.5 (soon to LinHES R6)
Asus M2NPV-VM
AMD Sempron 64 3200+
CORSAIR 2Gb DDR2
Seagate 200 GB IDE
Seagate 1TB Sata
NVIDIA GeForce 6150
Hauppauge PVR500
Hdhomerun (2x OTA)
Sharp Aquos 52" #LC-52D64U via DVI-HDIM cable
I have been reading the following posts (some by tjc), but am unable to get anywhere past the black screen.
- http://knoppmyth.net/phpBB2/viewtopic.php?t=20313
- http://knoppmyth.net/phpBB2/viewtopic.php?t=19668
- http://knoppmyth.net/phpBB2/viewtopic.php?t=19913
If you have any suggestions please let me know.
Thanks
_________________ -Roseville, Michigan USA LinHES R8: FE/BE, FE (x2)
Last edited by spideyk21 on Sat Oct 03, 2009 5:34 am, edited 2 times in total.
|
|
Top |
|
|
tjc
|
Posted: Tue Sep 29, 2009 10:21 pm |
|
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location:
Arlington, MA
|
I vaguely remember some special tweaking is required for the 6150 embedded graphics but not what it is. If you're following my outline you definitely can't use the chromakey OSD with that, and there are probably one or two other differences.
What does the X server log say it's getting/using for modelines?
|
|
Top |
|
|
spideyk21
|
Posted: Wed Sep 30, 2009 9:25 am |
|
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location:
Roseville, MI
|
I should have included my xorg.conf, and Xorg.0.log in the first place.
xorg.conf
Code: Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" # PS/2 Mouse not detected # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" EndSection
Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection
Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc:unscaled" FontPath "/usr/share/fonts/X11/75dpi:unscaled" FontPath "/usr/share/fonts/X11/100dpi:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/Speedo" FontPath "/usr/share/fonts/X11/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/share/fonts/X11/cyrillic" # FontPath "/usr/share/fonts/X11/latin2/75dpi" # FontPath "/usr/share/fonts/X11/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/latex-ttf-fonts" EndSection
Section "Module" # Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408 Load "dbe" # Double Buffering Extension, very important. # Load "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv. Load "glx" # GLX Extension. Load "freetype" # Freetype fonts. Load "type1" # Type 1 fonts Load "record" # Developer extension, usually not needed # Load "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it. SubSection "extmod" Option "omit xfree86-dga" EndSubSection # Load "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17 # The following are deprecated/unstable/unneeded in Xorg 7.0 # Load "ddc" # ddc probing of monitor, this should be never present, as it gets automatically loaded. # Load "GLcore" # This should be never present, as it gets automatically loaded. # Load "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice. EndSection
Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection
#Section "InputDevice" # Identifier "Serial Mouse" # Driver "mouse" # Option "Protocol" "Microsoft" # Option "Device" "/dev/ttyS0" # Option "Emulate3Buttons" "true" # Option "Emulate3Timeout" "70" # Option "SendCoreEvents" "true" #EndSection
Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection
Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection
# Auto-generated by KNOPPIX mkxf86config
Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" # Option "UseEdidDpi" "FALSE" Option "DPI" "100 x 100" VendorName "VSC" ModelName "VSC3e1f" # HorizSync 31 - 80 # DDC-probed # VertRefresh 56 - 75 # DDC-probed # These are the DDC-probed settings reported by your monitor. # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03 # ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1152x864, 75.0Hz; hfreq=67.50, vfreq=75.00 # ModeLine "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03 # ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07 # ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00 # ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19 # ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32 # ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00 # ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81 # ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504 -hsync -vsync # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94 # ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz # ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz # ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz # ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz # ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz # ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz # ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz # ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz # ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz # ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz # ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz # ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz # ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz # ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz # ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz # ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz # ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz # ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz # ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz # ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz # ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz # ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz # Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +HSync EndSection
Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0"
# Reduce Xorg/X Cpu Usage Option "UseEvents" "True"
# The following line is auto-generated by KNOPPIX mkxf86config Driver "nvidia" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" Option "XvmcUsesTextures" "false" #Option "NVAGP" "2" EndSection
Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0"
# Added Options # Option "ConnectedMonitor" "TV' Option "TVStandard" "HD1080p" Option "MetaModes" "1920x1080" # Option "UseDisplayDevice" "TV" Option "TVOutFormat" "AUTOSELECT" # Option "TVOverScan" "0.8" Option "UseEdidDpi" "FALSE" Option "DPI" "100 x 100" Option "NoLogo" "False"
# Origonal Options # Option "TVStandard" "NTSC-M" # Option "UseDisplayDevice" "TV" # Option "TVOutFormat" "COMPOSITE" # Option "TVOverScan" "0.8" # Option "UseEdidDpi" "FALSE" # Option "DPI" "100 x 100" # Option "NoLogo" "False"
DefaultColorDepth 24 SubSection "Display" Depth 1 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection
Section "DRI" Mode 0666 EndSection
Thanks
_________________ -Roseville, Michigan USA LinHES R8: FE/BE, FE (x2)
|
|
Top |
|
|
spideyk21
|
Posted: Wed Sep 30, 2009 9:27 am |
|
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location:
Roseville, MI
|
Xorg.0.log EDID pulled from Xorg.0.log.
Code: (II) NVIDIA(0): --- Done building ModePool for SHARP HDMI (DFP-0) --- (II) NVIDIA(0): (II) NVIDIA(0): (II) NVIDIA(0): --- Modes in ModePool for SHARP HDMI (DFP-0) --- (II) NVIDIA(0): "nvidia-auto-select" : 1920 x 1080 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1920x1080" : 1920 x 1080 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1920x1080_60" : 1920 x 1080 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1920x1080_60_0" : 1920 x 1080 @ 59.94/60 Hz (CEA-861B Format 16) (from: EDID) (II) NVIDIA(0): "1920x1080_24" : 1920 x 1080 @ 23.97/24 Hz (CEA-861B Format 32) (from: EDID) (II) NVIDIA(0): "1920x1080_60i" : 1920 x 1080 @ 59.94/60 Hz (CEA-861B Format 5) (from: EDID) (II) NVIDIA(0): "1680x1050" : 1680 x 1050 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1680x1050_60" : 1680 x 1050 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1600x1200" : 1600 x 1200 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1600x1200_60" : 1600 x 1200 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1600x1024" : 1600 x 1024 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1600x1024_60" : 1600 x 1024 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1440x900" : 1440 x 900 @ 60.2 Hz (from: X Server) (II) NVIDIA(0): "1440x900_60" : 1440 x 900 @ 60.2 Hz (from: X Server) (II) NVIDIA(0): "1440x480" : 1440 x 480 @ 60.1 Hz Interlace (from: EDID) (II) NVIDIA(0): "1440x480_60i" : 1440 x 480 @ 60.1 Hz Interlace (from: EDID) (II) NVIDIA(0): "1400x1050" : 1400 x 1050 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1400x1050_60" : 1400 x 1050 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1400x1050_60_0" : 1400 x 1050 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1360x768" : 1360 x 768 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1360x768_60" : 1360 x 768 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1280x1024" : 1280 x 1024 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1280x1024_60" : 1280 x 1024 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1280x960" : 1280 x 960 @ 60.0 Hz (from: X Server, VESA) (II) NVIDIA(0): "1280x960_60" : 1280 x 960 @ 60.0 Hz (from: X Server, VESA) (II) NVIDIA(0): "1280x800" : 1280 x 800 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1280x800_60" : 1280 x 800 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1280x768" : 1280 x 768 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1280x768_60" : 1280 x 768 @ 60.0 Hz (from: X Server) (II) NVIDIA(0): "1280x720" : 1280 x 720 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1280x720_60" : 1280 x 720 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1280x720_60_0" : 1280 x 720 @ 59.94/60 Hz (CEA-861B Format 4) (from: EDID) (II) NVIDIA(0): "1152x864" : 1152 x 864 @ 75.0 Hz (from: X Server, VESA) (II) NVIDIA(0): "1152x864_75" : 1152 x 864 @ 75.0 Hz (from: X Server, VESA) (II) NVIDIA(0): "1152x768" : 1152 x 768 @ 54.8 Hz (from: X Server) (II) NVIDIA(0): "1152x768_55" : 1152 x 768 @ 54.8 Hz (from: X Server) (II) NVIDIA(0): "1024x768" : 1024 x 768 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1024x768_75" : 1024 x 768 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1024x768_70" : 1024 x 768 @ 70.1 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "960x600" : 960 x 600 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "960x600d60" : 960 x 600 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "840x525" : 840 x 525 @ 60.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "840x525d60" : 840 x 525 @ 60.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "832x624" : 832 x 624 @ 74.6 Hz (from: X Server) (II) NVIDIA(0): "832x624_75" : 832 x 624 @ 74.6 Hz (from: X Server) (II) NVIDIA(0): "800x600" : 800 x 600 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "800x600d60" : 800 x 600 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "800x600_75" : 800 x 600 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x512" : 800 x 512 @ 60.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "800x512d60" : 800 x 512 @ 60.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "720x480" : 720 x 480 @ 59.9 Hz (from: EDID) (II) NVIDIA(0): "720x480_60" : 720 x 480 @ 59.9 Hz (from: EDID) (II) NVIDIA(0): "720x480_60i" : (1440)x 480 @ 59.94/60 Hz Interlace (CEA-861B Format 7) (from: EDID) (II) NVIDIA(0): "720x450" : 720 x 450 @ 60.2 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "720x450d60" : 720 x 450 @ 60.2 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x512" : 640 x 512 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x512d60" : 640 x 512 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x480" : 640 x 480 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x480d60" : 640 x 480 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x480_75" : 640 x 480 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "640x480_73" : 640 x 480 @ 72.8 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA) (II) NVIDIA(0): "640x480_60_0" : 640 x 480 @ 59.94/60 Hz Interlace (CEA-861B Format 1) (from: EDID) (II) NVIDIA(0): "640x400" : 640 x 400 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x400d60" : 640 x 400 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x384" : 640 x 384 @ 60.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "640x384d60" : 640 x 384 @ 60.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "576x432" : 576 x 432 @ 75.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "576x432d75" : 576 x 432 @ 75.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "576x384" : 576 x 384 @ 54.8 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "576x384d55" : 576 x 384 @ 54.8 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "512x384" : 512 x 384 @ 75.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "512x384d75" : 512 x 384 @ 75.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "512x384d70" : 512 x 384 @ 70.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "416x312" : 416 x 312 @ 74.7 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "416x312d75" : 416 x 312 @ 74.7 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "400x300" : 400 x 300 @ 75.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "400x300d75" : 400 x 300 @ 75.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "400x300d60" : 400 x 300 @ 60.3 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "400x300d56" : 400 x 300 @ 56.3 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "320x240" : 320 x 240 @ 75.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "320x240d75" : 320 x 240 @ 75.0 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "320x240d73" : 320 x 240 @ 72.8 Hz DoubleScan (from: X Server) (II) NVIDIA(0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server) (II) NVIDIA(0): --- End of ModePool for SHARP HDMI (DFP-0): ---
Thanks
_________________ -Roseville, Michigan USA LinHES R8: FE/BE, FE (x2)
|
|
Top |
|
|
spideyk21
|
Posted: Wed Sep 30, 2009 3:29 pm |
|
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location:
Roseville, MI
|
Was able to get the exact modelines.
Code: > grep '(from: .*EDID)' /var/log/Xorg.0.log (II) NVIDIA(0): "nvidia-auto-select" : 1920 x 1080 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1920x1080" : 1920 x 1080 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1920x1080_60" : 1920 x 1080 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1920x1080_60_0" : 1920 x 1080 @ 59.94/60 Hz (CEA-861B Format 16) (from: EDID) (II) NVIDIA(0): "1920x1080_24" : 1920 x 1080 @ 23.97/24 Hz (CEA-861B Format 32) (from: EDID) (II) NVIDIA(0): "1920x1080_60i" : 1920 x 1080 @ 59.94/60 Hz (CEA-861B Format 5) (from: EDID) (II) NVIDIA(0): "1600x1200" : 1600 x 1200 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1600x1200_60" : 1600 x 1200 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1440x480" : 1440 x 480 @ 60.1 Hz Interlace (from: EDID) (II) NVIDIA(0): "1440x480_60i" : 1440 x 480 @ 60.1 Hz Interlace (from: EDID) (II) NVIDIA(0): "1400x1050" : 1400 x 1050 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1400x1050_60" : 1400 x 1050 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1360x768" : 1360 x 768 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1360x768_60" : 1360 x 768 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1280x1024" : 1280 x 1024 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1280x1024_60" : 1280 x 1024 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1280x720" : 1280 x 720 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1280x720_60" : 1280 x 720 @ 60.0 Hz (from: EDID) (II) NVIDIA(0): "1280x720_60_0" : 1280 x 720 @ 59.94/60 Hz (CEA-861B Format 4) (from: EDID) (II) NVIDIA(0): "1024x768" : 1024 x 768 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1024x768_75" : 1024 x 768 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1024x768_70" : 1024 x 768 @ 70.1 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x600_75" : 800 x 600 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "720x480" : 720 x 480 @ 59.9 Hz (from: EDID) (II) NVIDIA(0): "720x480_60" : 720 x 480 @ 59.9 Hz (from: EDID) (II) NVIDIA(0): "720x480_60i" : (1440)x 480 @ 59.94/60 Hz Interlace (CEA-861B Format 7) (from: EDID) (II) NVIDIA(0): "640x480_75" : 640 x 480 @ 75.0 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "640x480_73" : 640 x 480 @ 72.8 Hz (from: X Server, VESA, EDID) (II) NVIDIA(0): "640x480_60_0" : 640 x 480 @ 59.94/60 Hz Interlace (CEA-861B Format 1) (from: EDID)
Hope this helps.
_________________ -Roseville, Michigan USA LinHES R8: FE/BE, FE (x2)
|
|
Top |
|
|
Greg Frost
|
Posted: Wed Sep 30, 2009 4:24 pm |
|
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location:
Adelaide, Australia
|
Perhaps if you pastebin your Xorg.0.log (the entire thing) and put a link to it here, someone might be able to help you.
|
|
Top |
|
|
spideyk21
|
Posted: Wed Sep 30, 2009 5:55 pm |
|
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location:
Roseville, MI
|
|
Top |
|
|
Greg Frost
|
Posted: Wed Sep 30, 2009 7:05 pm |
|
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location:
Adelaide, Australia
|
Sorry, I only glanced at your post to begin with. I dont think the problem is anything to do with your modelines because from what you have said that you have done (and from your Xorg log), it would appear you have a functioning 1920x1080 modeline.
What may be useful is the log output from mythfrontend when you attempt to play a recording.
Exit the frontend and get an xterm (Alt-X). Then type:
Code: mythfrontend -v playback &> frontend.log and post (or perhaps pastebin if it is huge) the frontend.log file after having attempted to play a recording.
|
|
Top |
|
|
spideyk21
|
Posted: Wed Sep 30, 2009 7:48 pm |
|
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location:
Roseville, MI
|
Ran the suggest command to log the output of mythfrontend, then tried to watch a HD recording (Big Bang Theory- Great show).
frontend.log: http://pastebin.com/m7806a59b
Mythtv appears to have a problem with the buffer, but then again I am not entirely sure what I am looking at.
Code: 2009-09-30 21:35:45.687 [mpegvideo_xvmc @ 0xb7265e68]get_buffer() failed (1 1073741824 2 (nil)) 2009-09-30 21:35:45.688 AFD Error: Unknown decoding error
thanks,
_________________ -Roseville, Michigan USA LinHES R8: FE/BE, FE (x2)
|
|
Top |
|
|
tjc
|
Posted: Thu Oct 01, 2009 12:00 am |
|
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location:
Arlington, MA
|
Well I see an obvious problem with the xorg.conf file. Having valid mode lines doesn't help if you don't use 'em... Notice anything missing here?
Quote: Code: DefaultColorDepth 24 SubSection "Display" Depth 1 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection
I'll give you a hint. Mine looks like this: Code: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 24 SubSection "Display" Depth 1 Modes "1920x1080_60i" "1280x720_60_0" "720x480_60" EndSubSection SubSection "Display" Depth 4 Modes "1920x1080_60i" "1280x720_60_0" "720x480_60" EndSubSection SubSection "Display" Depth 8 Modes "1920x1080_60i" "1280x720_60_0" "720x480_60" EndSubSection SubSection "Display" Depth 15 Modes "1920x1080_60i" "1280x720_60_0" "720x480_60" EndSubSection SubSection "Display" Depth 16 Modes "1920x1080_60i" "1280x720_60_0" "720x480_60" EndSubSection SubSection "Display" Depth 24 Modes "1920x1080_60i" "1280x720_60_0" "720x480_60" EndSubSection SubSection "Display" Depth 32 Modes "1920x1080_60i" "1280x720_60_0" "720x480_60" EndSubSection EndSection
|
|
Top |
|
|
spideyk21
|
Posted: Wed Dec 16, 2009 2:20 pm |
|
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location:
Roseville, MI
|
After some time, and tweaking, I am able to playback HD content with minimal effort. Tweaking my xorg.conf took a bit, but thanks to Martian letting me look at his settings I was able to get something working. The only thing I notice is black/white osd during playback, a bit of jitter when skipping forward & backward, and higher cpu usage.
For cpu usage my normal for SD content is around 20%, when playing HD content it jumps to 60-80%. I did have the system lockup once when playing HD while in the middle of recording.
Question now is do I stick with the onboard or move to video card that is VDPAU capable under mythtv v.22. I will have to check space requirements as the inside of my dvr is quite cramped.
Any suggestions?
_________________ -Roseville, Michigan USA LinHES R8: FE/BE, FE (x2)
|
|
Top |
|
|
tjc
|
Posted: Wed Dec 16, 2009 8:11 pm |
|
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location:
Arlington, MA
|
- If it works (and you're happy with it) no need to fix it.
- If you're not happy with it, a VDPAU capable card will offload a lot more work from the CPU and may give you a color OSD again (don't know enough about this).
My FX5200 generally does a good job even on HD content, but it does occasionally struggle on live HD stuff. If that starts annoying me enough it'll get replaced, probably as part of a move to a smaller lower wattage system.
|
|
Top |
|
|
Speed_D
|
Posted: Fri Dec 18, 2009 1:50 am |
|
Joined: Mon Feb 20, 2006 1:47 am
Posts: 31
|
I wholeheartedly recommend using a vdpau setup if your hardware supports it - nVidia 8 or higher I think. I have a fast system but the smoothness of navigation is still noticeably better with vdpau. You'll probably notice even more of a difference on a single core system.
Also when I was running a test frontend on a very low end system, xvmc is extremely helpful if you can get it working. You must use the Grey OSD and bob deinterlacing for xvmc, though.
For reference, my:
slow system: VIA 1.2ghz, 512MB, hauppauge PVR-250
fast system: AMD quad 3.0ghz, 4GB, nVidia 8200, HDHomerun, running both front and backend
|
|
Top |
|
|
tjc
|
Posted: Sat Dec 19, 2009 11:08 am |
|
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location:
Arlington, MA
|
Speed_D wrote: You must use the Grey OSD
True with the 6150 that spideyk21 is using, but there are low end cards (mostly FX5xxx series like mine) that have the chromakey support for a color OSD with XvMC.
|
|
Top |
|
|
Speed_D
|
Posted: Sat Dec 19, 2009 2:38 pm |
|
Joined: Mon Feb 20, 2006 1:47 am
Posts: 31
|
One more thing I forgot. Try going into the Playback settings and change the playback profile. If the setting is too high you can punish even the fastest machine when playing back HD.
|
|
Top |
|
|