hello,

sorry about my poor english.

i use the konppmythtv R5 A12
with a tenchnisat skystar 2 (rev. 2.6d)


the mythfilldatabase do not run by me system ...
the "tvtoday.de" may be offline of the channel service

can sombody tell me how to configure
the "manual scan" under mythtv for

germany
astra 19.2 east


whitch feq. must i enter to make a full scan

my dvb-setopbox find over 1000 channels (data/tv/radio)

thanks

bye

dennis

I did a google search for astra 19.2 DVB frequency, and found a few pages. Try these:

http://www.lyngsat.com/astra1e.html
11479, 11509, 11568, 11597, 11686MHz,
SR22000, FEC 5/6

http://www.lyngsat.com/astra19.html
10773, 10788, 10818, 10832, 10847, 10876, 10979, 11038, 11097, 11156, 11318, 11497, 11509MHz etc

Another web site said: 11.720 GHz Horizontal - SR 27500 FEC 3/4

_________________
| Nigel Pearson, nigel.pearson.au@gmail.com
| "Things you own end up owning you" - Tyler, Fight Club

This should be a "do a google" type question, but when I went through it for German Cable, I came up with a lot of disjoint information and it took a while to figure out.

As user mythtv (important!), run "mythfilldatabase --manual" and select the channels you want (there's about 100 to choose from).

Then run "mythfilldatabase" to download the data. You can do it from the menus, but it might be best to do it from the command line the first time (again, as user mythtv).

Then go into "mythtv-setup". All the channels should be there, but you will have to enter the correct frequencies. Check the web pages above or astra's web pages (this worked for me in R5, but in R4, I had to add the channels manually which was a pain since you need to figure out the xmltv tag for each one).

Allen

_________________
ASUS AT3N7A-I (Atom 330)
TBS 8922 PCI (DVB-S2)