LinHES Forums • View topic - Sound problems with saa7134 based tv-tuner

Board index KnoppMyth Hardware

All times are UTC - 6 hours

Sound problems with saa7134 based tv-tuner

Page 1 of 1

[ 4 posts ]

Print view

Previous topic Next topic

Author

Message

wmcyow

Post subject: Sound problems with saa7134 based tv-tuner

Posted: Mon Jan 30, 2006 12:58 pm

Joined: Thu Jan 26, 2006 9:08 am

Posts: 5

Good afternoon,

I am having trouble getting a quality audio signal from my saa7134 based tv-tuner. Currently I am using a loopback cabel from the card to the line-in on my sound card, however this is producing very poor quality sound. (lots of high pitched hissing).

I have tried to create /dev/dsp0 by including the

Code:

options oss=1

to the saa7134 moduels, but this is having no effect when the module is loaded. Here is the output from dmesg:

Code:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7130[0]: found at 0000:00:11.0, rev: 1, irq: 11, latency: 64, mmio: 0xcfffcc00
saa7130[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO2000 [card=3,autodetected]
saa7130[0]: board init: gpio is 1f900
saa7130[0]: there are different flyvideo cards with different tuners
saa7130[0]: out there, you might have to use the tuner=<nr> insmod
saa7130[0]: option to override the default value.
saa7130[0]: registered input device for IR
saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner (ivtv): chip found at addr 0xc2 i2c-bus saa7130[0]
tuner: type set to 39 (LG NTSC (newer TAPC series)) by saa7130[0]
tuner (ivtv): chip found at addr 0xc6 i2c-bus saa7130[0]
tuner: type set to 39 (LG NTSC (newer TAPC series)) by saa7130[0]
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
saa7130[0]: registered device radio0
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.

Does anyone have any ideas to either improve the quality of the audio via the line-in (the sound card is an onboard C-Media controller) or, enable the pci audio transfer option in the module?

thanks,

Bill

Top

Gerryo

Post subject: Re: Sound problems with saa7134 based tv-tuner

Posted: Sun Feb 05, 2006 3:01 pm

Joined: Sat Nov 26, 2005 8:05 pm

Posts: 19

wmcyow wrote:

I have a similar saa7134 card, but it has no eeprom.
I had sound problems, I found I had to adjust the Igain setting in the mixer to improve the sound.

Gerry

Top

Martin1802

Post subject: same problems

Posted: Thu Mar 23, 2006 10:30 am

Joined: Tue Feb 28, 2006 12:54 pm

Posts: 124

Location: Konstanz, Germany

Hi

having same problem ... using VIA EPIA M10000 board with Siemens DVB-C with analog module saa7146 based ...

onboard sound works ... dvb playback ... mp3 ... but could not get sound work for liveTV or recorded tv ... no sound played or recorded :-(

I tried your way with audio out to line in / aux ... select capture device ... tried "v4lctl ... volume mute off" ... read in other thread ... :-(

why is there no audio device ... no /dev/dsp ... no /dev/dvb/adapter0/audio0 working?

How to get more infos ... hope to get the problem solved?

-----------------------------------------
...
saa7146: register extension 'Multimedia eXtension Board'.
...
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
5
saa7146: found saa7146 @ mem df2d0000 (revision 1, irq 5) (0x110a,0x0000).
DVB: registering new adapter (Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:01:82:28
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 800026
1d
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: DVB-C analog module @ card 0 detected, initializing MSP3400
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
input: DVB on-card IR receiver as /class/input/input3
dvb-ttpci: found av7110-0.
...

-----------------------------------------

Last edited by Martin1802 on Thu Apr 27, 2006 8:07 am, edited 1 time in total.

Top

esigal

Post subject: same issue

Posted: Wed Apr 12, 2006 10:16 pm

Joined: Mon Mar 20, 2006 10:58 am

Posts: 2

I also have a cheapie lifeview card, audio from CD's, etc works. tested xawtv and heard live tv sound. then followed posts for alsa -V. still no sound.
in myth setup in v4l /dev/dsp is selected. Alsa-default is not available and dod not take when i tried it.

Did anyone find a resolution, I have been reading tons of posts but not this particular issue.

thanks

Top

Page 1 of 1

[ 4 posts ]

Board index KnoppMyth Hardware

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 20 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum