I am attempting to run Knoppmyth R5C7 on an old machine which I know may struggle to support it. The computer is a Pentium 2 350 Mhz, 256 MB. and the tuner card is a Winfast 2000XP Expert.
I have succesfully installed and run MythTV setup. I have followed Marcels excellent instructions on installing the drivers
http://mysettopbox.tv/phpBB2/viewtopic.php?t=10687&highlight=marcels
When I select Watch TV I get a blank screen.
When I look at the logs /var/log/dmesg and /var/log/messages both indicate that the drivers are correctly installed with tuner=38 for Australia. Last part of /var/log/messages is
Code:
Sep 16 15:38:38 mythtv kernel: TV tuner 38 at 0x1fe, Radio tuner -1 at 0x1fe
Sep 16 15:38:38 mythtv kernel: tuner 1-0060: All bytes are equal. It is not a TEA5767
Sep 16 15:38:38 mythtv kernel: tuner 1-0060: chip found @ 0xc0 (cx88[0])
Sep 16 15:38:38 mythtv kernel: tuner 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
Sep 16 15:38:38 mythtv kernel: tda9887 1-0043: chip found @ 0x86 (cx88[0])
Sep 16 15:38:38 mythtv kernel: cx88[0]: i2c scan: found device @ 0x86 [tda9887/cx22702]
Sep 16 15:38:38 mythtv kernel: cx88[0]: i2c scan: found device @ 0xa0 [eeprom]
Sep 16 15:38:38 mythtv kernel: cx88[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
Sep 16 15:38:38 mythtv kernel: cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
Sep 16 15:38:39 mythtv kernel: input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input4
Sep 16 15:38:39 mythtv kernel: cx88[0]/0: found at 0000:00:0d.0, rev: 5, irq: 10, latency: 165, mmio: 0xd0000000
Sep 16 15:38:39 mythtv kernel: cx88[0]/0: registered device video0 [v4l2]
Sep 16 15:38:39 mythtv kernel: cx88[0]/0: registered device vbi0
Sep 16 15:38:39 mythtv kernel: cx88[0]/0: registered device radio0
The only errors I can find in the logs is in /var/log/mythtv/mythbackend.log which gives
Code:
mpeg4 @ 0xb705d620]removing common factors from framerate
strange error flushing buffer ...
2006-09-16 17:59:45.213 TVRec(1): Changing from WatchingLiveTV to None
2006-09-16 17:59:45.635 Finished recording Melbourne Weekender: channel 1003
2006-09-16 18:14:04.036 MainServer::HandleAnnounce Monitor
2006-09-16 18:14:04.041 adding: mythtv as a client (events: 0)
2006-09-16 18:14:04.490 MainServer::HandleAnnounce Monitor
2006-09-16 18:14:04.497 adding: mythtv as a client (events: 1)
2006-09-16 18:14:21.468 MainServer::HandleAnnounce Playback
2006-09-16 18:14:21.476 adding: mythtv as a client (events: 0)
2006-09-16 18:14:21.489 TVRec(1): Changing from None to WatchingLiveTV
2006-09-16 18:14:21.591 Channel::GetCurrentChannelNum(): Failed to find Channel ''
2006-09-16 18:14:21.598 Channel(/dev/video0)::TuneTo(): Error, failed to find channel.
2006-09-16 18:14:21.601 TVRec(1) Error: Failed to set channel to 7.
strange error flushing buffer ...
2006-09-16 18:14:43.789 TVRec(1): Changing from WatchingLiveTV to None
2006-09-16 18:14:44.674 Finished recording Seven News: channel 1003
This seems to indicate that it can't set the tuner to channel 7, my selected default.
Can anyone shed any light on my problem?
[/url]
View unanswered posts
View active topics
KnoppMyth 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register
