View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 2 of 3
  [ 39 posts ] 
Go to page Previous  1, 2, 3  Next
Print view Previous topic   Next topic  
Author Message
Search for:
shplad
 Post subject:
PostPosted: Fri Jul 15, 2005 11:07 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
I hear ya. I hear ya. Actually, that's the same problem I have. lirc works perfectly,
but MythTV doesn't recognize any keypresses. The only thing I could do to get it to work
at all was use a different lircrc file, but that only seemed to work for about the first 15 minutes
after X had been run. Very strange. If you do find a solution to the above problem, I'd really
appreciate it. If all I need to do is uninstall and reinstall lirc, I'll gladly do it, as this is getting
very frustrating indeed.

I may be onto something related to this problem. Would you mind telling me what happens if you try
to start mythfrontend from a console in X. If you then exit Myth, and look back at your console,
does it display any errors? I want to see if the same thing is happening on your machine as on mine.


shplad

navilor wrote:
shplad wrote:
navilor:

I am having very similar but slightly different problem, except I'm using lirc 0.7.0. Notice what robert wrote in his HOWTO:

"lirc-0.7.1 has support for this remote, but I was unable to get it to work"

So perhaps you'll want to try 0.7.0, if all else fails.

Either way, please let us know what works for you.

shplad


shplad,

Thanks, but I've been down that road. My issue when I was running 0.7.0 with the patch was that lirc was able to recognize the remote but MythTV wasn't. I may uninstall and reinstall lirc just to see what happens, but I really want to be able to get repeatable results from a base install. This will help me out making a nice full install disk in case I have a bad hardware issue.

That, and a friend of mine wants to get a MythTV box going, but since I'm going through hell right now on this remote thing he is going to wait. When I am successful he will get the same exact hardware that I'm running and I can just run my disk on his machine and it should start working right away.

That's the plan anyway.

navilor

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
navilor
 Post subject:
PostPosted: Fri Jul 15, 2005 11:46 am 
Offline
Joined: Tue Jun 28, 2005 11:54 am
Posts: 26
Location: Seattle, WA
shplad wrote:
I hear ya. I hear ya. Actually, that's the same problem I have. lirc works perfectly,
but MythTV doesn't recognize any keypresses. The only thing I could do to get it to work
at all was use a different lircrc file, but that only seemed to work for about the first 15 minutes
after X had been run. Very strange. If you do find a solution to the above problem, I'd really
appreciate it. If all I need to do is uninstall and reinstall lirc, I'll gladly do it, as this is getting
very frustrating indeed.

I may be onto something related to this problem. Would you mind telling me what happens if you try
to start mythfrontend from a console in X. If you then exit Myth, and look back at your console,
does it display any errors? I want to see if the same thing is happening on your machine as on mine.


shplad


I won't get a chance to get that info to you until probably tomorrow. I've got some recordings tonight (Stargate SG-1, Stargate Atlantis and Battlestar Galactica) and don't want to mess with the system until that is all finished.

Oh, and if I find a solution for you it would probably also work for me as I can get back to having the problem in a jiffy.
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Fri Jul 15, 2005 12:20 pm 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
<Off-topic>, but it's sooo painful to hear you Yanks can watch the new episodes of BFG
and we're still waiting to get them on our crappy sci-fi type network up here in Canada.
The season finale was so darned good. Best sci-fi show in 10 or 15 years.
Do you guys get the new Doctor Who down there?


I'll be curious to see what your results are. Please post when you get time.

shplad


navilor wrote:
shplad wrote:
I hear ya. I hear ya. Actually, that's the same problem I have. lirc works perfectly,
but MythTV doesn't recognize any keypresses. The only thing I could do to get it to work
at all was use a different lircrc file, but that only seemed to work for about the first 15 minutes
after X had been run. Very strange. If you do find a solution to the above problem, I'd really
appreciate it. If all I need to do is uninstall and reinstall lirc, I'll gladly do it, as this is getting
very frustrating indeed.

I may be onto something related to this problem. Would you mind telling me what happens if you try
to start mythfrontend from a console in X. If you then exit Myth, and look back at your console,
does it display any errors? I want to see if the same thing is happening on your machine as on mine.


shplad


I won't get a chance to get that info to you until probably tomorrow. I've got some recordings tonight (Stargate SG-1, Stargate Atlantis and Battlestar Galactica) and don't want to mess with the system until that is all finished.

Oh, and if I find a solution for you it would probably also work for me as I can get back to having the problem in a jiffy.

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
navilor
 Post subject:
PostPosted: Sat Jul 16, 2005 11:50 am 
Offline
Joined: Tue Jun 28, 2005 11:54 am
Posts: 26
Location: Seattle, WA
shplad wrote:
<Off-topic>, but it's sooo painful to hear you Yanks can watch the new episodes of BFG
and we're still waiting to get them on our crappy sci-fi type network up here in Canada.
The season finale was so darned good. Best sci-fi show in 10 or 15 years.
Do you guys get the new Doctor Who down there?


I'll be curious to see what your results are. Please post when you get time.

shplad


I also feel it sucks you don't get Battlestar Galactica. I haven't seen ANY Doctor Who down here. :( Perhaps our two coutries could sign a treaty allowing free trade of sci-fi. Ok, I'll wake up out of my dream now.

Here is what I have. Mind you this after I have done a recording so there is stuff broken. I did a line like:
Code:
mythfrontend 1> 1.txt 2> 2.txt

to capture the error messages. This is what I got:
Code:
2005-07-16 10:19:55.731 New DB connection, total: 1
Total desktop width=800, height=600, numscreens=1
2005-07-16 10:19:55.735 Using screen 0, 800x600 at 0,0
2005-07-16 10:19:55.738 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org
2005-07-16 10:19:55.738 Enabled verbose msgs : important general
2005-07-16 10:19:55.874 Switching to square mode (blue)
2005-07-16 10:19:56.010 Joystick disabled.
2005-07-16 10:19:56.011 New DB connection, total: 2
2005-07-16 10:19:56.025 Registering Internal as a media playback plugin.
2005-07-16 10:19:56.039 Registering MythDVD DVD Media Handler as a media handler
2005-07-16 10:19:56.039 Registering MythDVD VCD Media Handler as a media handler
2005-07-16 10:19:56.618 Registering MythMusic Media Handler as a media handler
SIP listening on IP Address 192.168.1.151:5060 NAT address 192.168.1.151
SIP: Cannot register; proxy, username or password not set
2005-07-16 10:19:59.516 Connecting to backend server: 192.168.1.151:6543 (try 1 of 5)
2005-07-16 10:19:59.524 Using protocol version 15

I hope it helps out in some way.
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sat Jul 16, 2005 3:35 pm 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Hmm....me wonders whether it would be possible to establish a "Free
Trade" zone
between us, if ya know what I mean. ;-)

As for the lirc issue, my results have to be the most bizarre ever. Last night, I was on
another forum, and someone told me I was using the wrong file for my lircrc. I replaced it
with the one he suggested. Bam-lirc works in Myth. Then, I go out for a couple of hours,
come home and Bam-lirc doesn't work at all, even outside of Myth. I'm starting to wonder
about this card. I reseated the card in its pci slot, but still having intermittent functionality.
I think I'm gonna have a go at removing all traces of lirc and then reinstalling it again.
If that doesn't work, I'm going to put the card in a Windows machine to diagnose whether
it's defective or not. That crappy 1/16" mini plug they use on the back for the ir cord doesn't
inspire much confidence either. I have my doubts about the stability of that thing.

Oh, previously, before I used that new lircrc file, I got error messages in the console
about unrecognized tokens in the lircrc file, with the final one being that the file was invalid.


shplad





navilor wrote:
shplad wrote:
<Off-topic>, but it's sooo painful to hear you Yanks can watch the new episodes of BFG
and we're still waiting to get them on our crappy sci-fi type network up here in Canada.
The season finale was so darned good. Best sci-fi show in 10 or 15 years.
Do you guys get the new Doctor Who down there?


I'll be curious to see what your results are. Please post when you get time.

shplad


I also feel it sucks you don't get Battlestar Galactica. I haven't seen ANY Doctor Who down here. :( Perhaps our two coutries could sign a treaty allowing free trade of sci-fi. Ok, I'll wake up out of my dream now.

Here is what I have. Mind you this after I have done a recording so there is stuff broken. I did a line like:
Code:
mythfrontend 1> 1.txt 2> 2.txt

to capture the error messages. This is what I got:
Code:
2005-07-16 10:19:55.731 New DB connection, total: 1
Total desktop width=800, height=600, numscreens=1
2005-07-16 10:19:55.735 Using screen 0, 800x600 at 0,0
2005-07-16 10:19:55.738 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org
2005-07-16 10:19:55.738 Enabled verbose msgs : important general
2005-07-16 10:19:55.874 Switching to square mode (blue)
2005-07-16 10:19:56.010 Joystick disabled.
2005-07-16 10:19:56.011 New DB connection, total: 2
2005-07-16 10:19:56.025 Registering Internal as a media playback plugin.
2005-07-16 10:19:56.039 Registering MythDVD DVD Media Handler as a media handler
2005-07-16 10:19:56.039 Registering MythDVD VCD Media Handler as a media handler
2005-07-16 10:19:56.618 Registering MythMusic Media Handler as a media handler
SIP listening on IP Address 192.168.1.151:5060 NAT address 192.168.1.151
SIP: Cannot register; proxy, username or password not set
2005-07-16 10:19:59.516 Connecting to backend server: 192.168.1.151:6543 (try 1 of 5)
2005-07-16 10:19:59.524 Using protocol version 15

I hope it helps out in some way.

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
navilor
 Post subject:
PostPosted: Sat Jul 16, 2005 4:03 pm 
Offline
Joined: Tue Jun 28, 2005 11:54 am
Posts: 26
Location: Seattle, WA
shplad wrote:
Hmm....me wonders whether it would be possible to establish a "Free
Trade" zone
between us, if ya know what I mean. ;-)

As for the lirc issue, my results have to be the most bizarre ever. Last night, I was on
another forum, and someone told me I was using the wrong file for my lircrc. I replaced it
with the one he suggested. Bam-lirc works in Myth. Then, I go out for a couple of hours,
come home and Bam-lirc doesn't work at all, even outside of Myth. I'm starting to wonder
about this card. I reseated the card in its pci slot, but still having intermittent functionality.
I think I'm gonna have a go at removing all traces of lirc and then reinstalling it again.
If that doesn't work, I'm going to put the card in a Windows machine to diagnose whether
it's defective or not. That crappy 1/16" mini plug they use on the back for the ir cord doesn't
inspire much confidence either. I have my doubts about the stability of that thing.

Oh, previously, before I used that new lircrc file, I got error messages in the console
about unrecognized tokens in the lircrc file, with the final one being that the file was invalid.


shplad


Do a cold boot. See if your functionality comes back. If so, welcome to my world! :cry:

Also, if that happens reread this thread and see what you come up with when doing what I did.
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Fri Aug 19, 2005 12:49 pm 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
navilor:

Okay, well I uninstalled all traces of lirc. Interestingly enough, I found a
deb package of liblircclient0 .7.1pre2-2 in Synpatic, so I uninstalled that.
Myth would not run after that, complaining that it needed lirc_client0 or
similar to run.

I reinstalled lirc 0.7.0 from source. Myth still wouldn't run, though irw
worked okay. I then reinstalled the above deb package, and the remote
works fine in Myth. For a while. Then it suddenly quits without warning and won't work unless...you guessed it...

Unless I do A COLD BOOT.

navilor: Did you ever find a solution to this problem? Since we've
replicated it, it can't be too rare.

Anxiously awaiting your reply.


shplad

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
navilor
 Post subject:
PostPosted: Fri Aug 19, 2005 6:59 pm 
Offline
Joined: Tue Jun 28, 2005 11:54 am
Posts: 26
Location: Seattle, WA
shplad wrote:
navilor:

Okay, well I uninstalled all traces of lirc. Interestingly enough, I found a
deb package of liblircclient0 .7.1pre2-2 in Synpatic, so I uninstalled that.
Myth would not run after that, complaining that it needed lirc_client0 or
similar to run.

I reinstalled lirc 0.7.0 from source. Myth still wouldn't run, though irw
worked okay. I then reinstalled the above deb package, and the remote
works fine in Myth. For a while. Then it suddenly quits without warning and won't work unless...you guessed it...

Unless I do A COLD BOOT.

navilor: Did you ever find a solution to this problem? Since we've
replicated it, it can't be too rare.

Anxiously awaiting your reply.


shplad


Sorry, I've got nothing. I'm giving up on this remote and am going to purchase a wireless keyboard. :(

My remote will work for a long time, and then at some point when it is recording it will die. That is my symptom.

Perhaps this will be addressed in an update in the future.
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sat Aug 20, 2005 9:15 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
navilor wrote:
shplad wrote:
navilor:

Okay, well I uninstalled all traces of lirc. Interestingly enough, I found a
deb package of liblircclient0 .7.1pre2-2 in Synpatic, so I uninstalled that.
Myth would not run after that, complaining that it needed lirc_client0 or
similar to run.

I reinstalled lirc 0.7.0 from source. Myth still wouldn't run, though irw
worked okay. I then reinstalled the above deb package, and the remote
works fine in Myth. For a while. Then it suddenly quits without warning and won't work unless...you guessed it...

Unless I do A COLD BOOT.

navilor: Did you ever find a solution to this problem? Since we've
replicated it, it can't be too rare.

Anxiously awaiting your reply.


shplad


Sorry, I've got nothing. I'm giving up on this remote and am going to purchase a wireless keyboard. :(

My remote will work for a long time, and then at some point when it is recording it will die. That is my symptom.

Perhaps this will be addressed in an update in the future.



Hmmm...when you're recording, eh? Mine dies as long as Myth is running. Just out
of curiosity, would you mind checking which firmware you're using? Do you by any chance
have a line in dmesg that indicates that 10k or so of the firmware didn't download properly
or something similar?

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
navilor
 Post subject: Hope this helps.
PostPosted: Sat Aug 20, 2005 10:32 am 
Offline
Joined: Tue Jun 28, 2005 11:54 am
Posts: 26
Location: Seattle, WA
shplad wrote:
Hmmm...when you're recording, eh? Mine dies as long as Myth is running. Just out
of curiosity, would you mind checking which firmware you're using? Do you by any chance
have a line in dmesg that indicates that 10k or so of the firmware didn't download properly
or something similar?


Let me know if this gives you what you were looking for from dmesg


Linux version 2.6.11.9-chw-2 (root@devonthego.mysettopbox.tv) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP Sat May 14 12:11:44 CDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 apm=power-off nomce
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1837.482 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033704k/1048512k available (2979k kernel code, 14196k reserved, 1133k data, 224k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3637.24 BogoMIPS (lpj=1818624)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0ab8)
CPU0: AMD Athlon(tm) XP 2500+ stepping 00
per-CPU timeslice cutoff: 1462.90 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 0001
groups: 0001
domain 1: span 0001
groups: 0001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 3k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
spurious 8259A interrupt: IRQ7.
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5500-0x553f has been reserved
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
vesafb: framebuffer at 0xd4000000, mapped to 0xf8880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e340
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found.
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6B250R0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
hdd: WDC WD300BB-00AUA1, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdd: max request size: 128KiB
hdd: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(33)
hdd: cache flushes not supported
hdd: hdd1
hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
sata_sil version 0.8
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
ata1: SATA max UDMA/100 cmd 0xF8802080 ctl 0xF880208A bmdma 0xF8802000 irq 11
ata2: SATA max UDMA/100 cmd 0xF88020C0 ctl 0xF88020CA bmdma 0xF8802008 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
Fusion MPT base driver 3.01.18
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.18
Fusion MPT misc device (ioctl) driver 3.01.18
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Logitech Mouse on isa0060/serio1
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 4932.000 MB/sec
raid5: using function: pIII_sse (4932.000 MB/sec)
raid6: int32x1 550 MB/s
raid6: int32x2 722 MB/s
raid6: int32x4 511 MB/s
raid6: int32x8 519 MB/s
raid6: mmxx1 1136 MB/s
raid6: mmxx2 1953 MB/s
raid6: sse1x1 1449 MB/s
raid6: sse1x2 2375 MB/s
raid6: using algorithm sse1x2 (2375 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 15
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI
ACPI: (supports S0 S1 S4 S4bios S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 186305 to 187100
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 4284 and revoked 24/21 blocks
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 436701
ext3_orphan_cleanup: deleting unreferenced inode 436695
EXT3-fs: hda1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 224k freed
Adding 594396k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 7 (level, low) -> IRQ 7
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 7, pci mem 0xdd000000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 5, pci mem 0xdd001000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
Real Time Clock Driver v1.12
ACPI: Power Button (FF) [PWRF]
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[dd003000-dd0037ff] Max Packet=[2048]
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xc0000000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
gameport: pci0000:01:08.1 speed 877 kHz
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 7
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci1394: fw-host0: SelfID received outside of bus reset sequence
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 17
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000005c8d9]
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
lirc_dev: IR Remote Control driver registered, at major 61
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
saa7115: starting probe for adapter SMBus nForce2 adapter at 5000 (0x0)
saa7115: starting probe for adapter SMBus nForce2 adapter at 5500 (0x0)
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 4 (level, low) -> IRQ 4
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
ivtv: i2c attach [client=tveeprom,ok]
ivtv: i2c attach [client=(tuner unset),ok]
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
tveeprom: Hauppauge: model = 26052, rev = C185, serial# = 7577780
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x008d1615, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'.
cx25840: Failed to load any FW image file
ivtv: i2c attach [client=cx25840[0],ok]
wm8775: Ignoring new-style parameters in presence of obsolete ones
wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
wm8775: Updating register 2 (R11), config: 1622 active: 1621.
wm8775: Updating register 3 (R12), config: 1802 active: 1902.
wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
wm8775: Skipping register 7 (R16), config: 207b active: 207b.
wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
wm8775: Updating register 9 (R18), config: 2432 active: 2482.
wm8775: Updating register 10 (R19), config: 2600 active: 2601.
wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
ivtv: i2c attach [client=wm8775[0],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 50
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
cx2388x v4l2 driver version 0.0.4 loaded
lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150))
ivtv: i2c attach [client=Hauppauge IR (PVR150),ok]
lirc_dev: lirc_register_plugin: sample_rate: 10
ivtv: ivtv_enc_thread: pid = 2047, itv = 0xf92d4aa0
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Disabled Privacy Extensions on device c04b6b00(lo)
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
cx25840: Decoder set size 720x480 (from 720x487) -> scale 0x65529, filter 0
ts: Compaq touchscreen protocol output
input: PC Speaker
eth0: no IPv6 routers present
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem 0xdd002000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 3 (level, low) -> IRQ 3
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
cx25840: Decoder set size 720x480 (from 720x487) -> scale 0x65529, filter 0
cx25840: Decoder set size 720x480 (from 720x487) -> scale 0x65529, filter 0
cx25840: Decoder set size 720x480 (from 720x487) -> scale 0x65529, filter 0
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sat Aug 20, 2005 11:02 am 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Well this looks like a smoking gun to me... (There are other things in there that bear investigation and fixing but this is probably the key)
Quote:
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'.
cx25840: Failed to load any FW image file

If you were to feed the term "HcwMakoA.ROM" into a Google search... You would find information like this:
http://ivtv.writeme.ch/tiki-index.php?page=PVR150-500Firmware
http://mysettopbox.tv/phpBB2/viewtopic.php?t=4822
http://mysettopbox.tv/phpBB2/viewtopic.php?t=5552
From the results Google provided a search of the forums here would have been just as effective.
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sat Aug 20, 2005 1:13 pm 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
tjc:

Ummm....er...uh....I appreciate the post, but...what's the answer? Not that I'm asking to
be spoonfed, but I believe it's not likely that a Linux newbie would've come up with
those links based on the symptoms observed. I'm still not sure I see the connection.
None of the other posts mention symptoms similar to mine and navilor's, that I can see.

Should I infer that because there was trouble downloading the firmware, that the firmware
is buggy, and therefore, I should use a different version of the firmware? I always figured
the error itself was misleading. After all, if the firmware wasn't downloaded,
how would the card work at all? Again, I think you're really overestimating the skill level
of a newbie (at least me, don't know about navilor) to troubleshoot and find solutions.


Shplad




tjc wrote:
Well this looks like a smoking gun to me... (There are other things in there that bear investigation and fixing but this is probably the key)
Quote:
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'.
cx25840: Failed to load any FW image file

If you were to feed the term "HcwMakoA.ROM" into a Google search... You would find information like this:
http://ivtv.writeme.ch/tiki-index.php?page=PVR150-500Firmware
http://mysettopbox.tv/phpBB2/viewtopic.php?t=4822
http://mysettopbox.tv/phpBB2/viewtopic.php?t=5552
From the results Google provided a search of the forums here would have been just as effective.

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sat Aug 20, 2005 4:34 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
shplad wrote:
Ummm....er...uh....I appreciate the post, but...what's the answer? Not that I'm asking to be spoonfed, but I believe it's not likely that a Linux newbie would've come up with those links based on the symptoms observed. I'm still not sure I see the connection.

They don't display the symptom because they've got the firmware installed. Follow the directions given in those posts to install the firmware in the right place.
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sun Aug 21, 2005 8:19 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Hmmm...I still don't understand your answer. So you're saying in navilor's
case, the firmware isn't loading at all? The card can work with no firmware
installed, just not properly?

I have this in my dmesg log. I just ignored it because the card worked.
Would it indicate the same thing in my case?


Code:
i2c_adapter i2c-0: sendbytes: error - bailout.
cx25840: Failed to upload FW chunk, size 1022, uploaded 5110 bytes.
cx25840: Failed to load any FW image file
cx25840: Status: cx258413 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]



shplad


tjc wrote:
shplad wrote:
Ummm....er...uh....I appreciate the post, but...what's the answer? Not that I'm asking to be spoonfed, but I believe it's not likely that a Linux newbie would've come up with those links based on the symptoms observed. I'm still not sure I see the connection.

They don't display the symptom because they've got the firmware installed. Follow the directions given in those posts to install the firmware in the right place.

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Tue Aug 23, 2005 8:39 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
There are multiple chunks of firmware, and multiple versions, and the PVR-150 apparently arranges them differently than the 250/350. For the 250/350 there is an encoder piece and a decoder (only useful for the 350). If you had a 350 but only had the encoder firmware available you might get partial functionality.

My off the cuff guess is that with the 150, and probably due to the more capable IR dongle (detect and blast both), they broke that out as a seperate chunk. Or it could be something completely different... When debugging it's easy to get fooled by partial functionality so it's good to fix all the problems that you can even if they don't seem obviously related.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 39 posts ] 
Go to page Previous  1, 2, 3  Next


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 23 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu