LinHES Forums
http://forum.linhes.org/

R5C7 PC-DL Deluxe, ATI HDTV Problem nVidia FX5500 [RESOLVED]
http://forum.linhes.org/viewtopic.php?f=2&t=10442		 Page 1 of 1
Author:  subxtech [ Sun Jun 11, 2006 12:27 pm ]
Post subject:  R5C7 PC-DL Deluxe, ATI HDTV Problem nVidia FX5500 [RESOLVED]
I have used the auto install option to set up the server.

The initial install would not take the HDTV Wonder card, with the NVIDIA FX5500.

So I removed the card, everything came up ok. Now I am able to log into the box and look at dmesg

Here is the output from dmesg:

cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 23
CORE cx88[0]: subsystem: 1002:a101, board: ATI HDTV Wonder [card=34,autodetected]
TV tuner 68 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/0: found at 0000:02:0a.0, rev: 5, irq: 23, latency: 32, mmio: 0xe2000000
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0061: type set to 68 (Philips TUV1236D ATSC/NTSC dual in)
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
cx2388x blackbird driver version 0.0.5 loaded
cx2388x dvb driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:02:0a.2[A] -> GSI 22 (level, low) -> IRQ 23
cx88[0]/2: found at 0000:02:0a.2, rev: 5, irq: 23, latency: 32, mmio: 0xe4000000
cx88[0]/2: cx2388x based dvb card
nxt200x: NXT2004 Detected
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)...
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
bttv0: PLL can sleep, using XTAL (28636363).
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
NVRM: This IO region assigned to your NVIDIA device is invalid:
NVRM: BAR1 is 0M @ 0x00000000 (PCI:0001:00.0)
NVRM: The system BIOS may have misconfigured your graphics card.
ACPI: PCI interrupt for device 0000:01:00.0 disabled
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
NVRM: This IO region assigned to your NVIDIA device is invalid:
NVRM: BAR1 is 0M @ 0x00000000 (PCI:0001:00.0)
NVRM: The system BIOS may have misconfigured your graphics card.
ACPI: PCI interrupt for device 0000:01:00.0 disabled
NVIDIA: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!


Now to me it looks like the NVIDIA card is the cultrate and that the ATI card is coming up fine and even initializing.

I can not seem to understand what is happening here, I have been banging my head for a week uninstalling installing updating. Has anyone had success with the install of HDTV and a NVIDIA FX5500?

Since this is a "Workstation" mother board, I have complete access to the PCI/IRQ settings, and have taken that off of auto and set them manually.

Sorry for the scattered notes, I am just going out of my mind and would appreciate any guidance, even if you think it may be redundant.
Author:  subxtech [ Sun Jun 11, 2006 5:36 pm ]
Post subject: 
After more searching, I think part of the problem might be the speed of the AGP port since it is referenced that the BIOS may have "misconfigured" the port.
Author:  subxtech [ Mon Jun 12, 2006 7:35 am ]
Post subject: 
Just an FYI UPDATE YOUR BIOS if you encounter Bios errors, I know this sounds like a no brainer, but when you're in the thick of it and you know your machine has run fine before, it may slip your mind so:

BIOS errors = Update your BIOS

That being said, where do I get the latest ATI Firmware updates? I see people speaking of them on the board, but no reference to where these are located. Since this is so new, googling is rather confusing and misleading. Plus a post on the board may help others trying to get an ATI HDTV wonder up and running.
Author:  subxtech [ Mon Jun 12, 2006 5:47 pm ]
Post subject: 
I have had weird moments where things just start working, I am not complaining, but who knows, the sound works when I am working on the video portions and video starts working when I am working on the sound. Makes this so much more fun and interesting! :-)

Oh since no one has replied this is like my personal blog and in a couple years I can go back and laugh at myself, much like you have been if you have followed this thread.
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/