LinHES Forums
http://forum.linhes.org/

aopen winfast 2000XP EXPERT card
http://forum.linhes.org/viewtopic.php?f=2&t=10687		 Page 1 of 1
Author:  marcels [ Sun Jul 02, 2006 11:44 am ]
Post subject:  aopen winfast 2000XP EXPERT card
Dear Reader,

I have an aopen ea65 II barebone with an aopen winfast 2000XP EXPERT card. (Leadtek).

Normaly these cards have 107d:6611 or 107d:6613 pci string (Leadtek).
Aopen has put their own pci string in de TV-card: a0a0:6f05

I already add this pci string to the cx88-cards.c file.

What must i do to get the system to recongnize these changes?
I'm a bit unfamiliar with compiling and installing drivers.

Best regards,

MarcelS
Author:  marcels [ Tue Jul 04, 2006 1:53 pm ]
Post subject: 
rmmod cx8800
rmmod cx88xx
modprobe cx88xx i2c_scan=1 card=5 tuner=63 && modprobe cx8800


tail /var/log/messages

Jul 4 21:38:25 mythtv kernel: cx2388x v4l2 driver version 0.0.5 loaded
Jul 4 21:38:25 mythtv kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 18 (level, low) -> IRQ 16
Jul 4 21:38:25 mythtv kernel: CORE cx88[0]: subsystem: a0a0:6f05, board: Leadtek Winfast 2000XP Expert [card=5,insmod option]
Jul 4 21:38:25 mythtv kernel: TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
Jul 4 21:38:25 mythtv kernel: tuner 1-0060: All bytes are equal. It is not a TEA5767
Jul 4 21:38:25 mythtv kernel: tuner 1-0060: chip found @ 0xc0 (cx88[0])
Jul 4 21:38:25 mythtv kernel: tuner 1-0060: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Jul 4 21:38:25 mythtv kernel: cx88[0]: i2c scan: found device @ 0x86 [tda9887/cx22702]
Jul 4 21:38:25 mythtv kernel: cx88[0]: i2c scan: found device @ 0xa0 [eeprom]
Jul 4 21:38:25 mythtv kernel: cx88[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
Jul 4 21:38:26 mythtv kernel: cx88[0]: Leadtek eeprom invalid.
Jul 4 21:38:26 mythtv kernel: input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input3
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: found at 0000:02:04.0, rev: 5, irq: 16, latency: 32, mmio: 0xfa000000
Jul 4 21:38:26 mythtv kernel: tda9887 1-0043: chip found @ 0x86 (cx88[0])
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: registered device video0 [v4l2]
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: registered device vbi0
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: registered device radio0

Now the LR6611 (Leadtek winfast 2000XP EXPERT REV.5) works.
I have a tv, radio and a caption device.

But after a reboot it shows card=0 (Unknown) in /var/log/messages again.

Does someone know how to make this permanent, so that after a reboot the same settings are made?


Best Regards

MarcelS
Author:  marcels [ Sun Jul 09, 2006 12:05 pm ]
Post subject: 
Agian i got a step in the right direction:

I have editted cx88-cards.c and added and changed de following:

Added:vendorid = 0xa0a0, deviceid = 0x6f05 for winfast 2000XP expert.
I changed the tuner setting for the winfast 2000XP expert card to TUNER_PHILIPS_FM1216ME_MK3 (his is the demodulator on my card)

Run:
/usr/src/kernel-version/make <enter>

Now a new cx88xx.ko cx8800.ko are generated.
copy these to the working directory and reboot the computer.
The TV card now loads automaticaly.

Up to the next problem, color depth ;-)

Best regards Marcel
Author:  cesman [ Sun Jul 09, 2006 3:24 pm ]
Post subject: 
Perhaps feeding your change back to the v4l-dvb folks, so others don't have the same issue. Share and share alike. ;)
Author:  marcels [ Mon Jul 10, 2006 10:15 am ]
Post subject: 
Hello,

Is there a some kind of procedure when giving a feedback, like in what format, and where exactly can send this feedback?

Best Regards,

Marcels
Author:  cesman [ Mon Jul 10, 2006 5:42 pm ]
Post subject: 
I don't know... I'd suggest going to linuxtv.org and see what you can find.
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/