View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 2 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
 Post subject: IVTVCTL: Error Msgs ?
PostPosted: Sun Jul 09, 2006 2:24 pm 
Offline
Joined: Wed Apr 19, 2006 5:18 am
Posts: 79
Location: Conroe, TX
Working with ivtvctl, I tried a few checks and came up with this:

ivtvctl -J
Ioctl: IVTV_IOC_G_DECODER_REG failed (20 lines for all 3 commands)
00 01 02 03....to 0F

ivtv -G
ioctl: IVTV_IOC_G_ENCODER_REB failed
same message as above (00-0F)

ivtv -I
ioctl: Input detect failed (cannot read SAA regs)

What am I doing wrong here, if anything. 'Just getting into using ivtvctl, so
I'm new at this, but this doesn't look correct.
R5C7, PVR-350 & 500, composite in, S-video out: unit working fine with 350, 500 gives a picture but not really that good, PIP works, everything seems to work including remote (silver), using ivtv-0.4.4.
Any comments appreciated.
Thanks


Top
 Profile  
 
 Post subject: From Logs..
PostPosted: Sun Jul 09, 2006 7:54 pm 
Offline
Joined: Wed Apr 19, 2006 5:18 am
Posts: 79
Location: Conroe, TX
This is from the kernel, daemon, & X logs, showing something's really wrong. Yet everything is working to some extent; pvr-350 gives a good picture, just needs a little better sharpening or focus to it.
Strange thing too is that my /dev/video is set to 39, not 48, and it's working; if I set it to 48, I get no picture.
Any comment appreciated.


Kernel:
___________________________________________________________

Jul 9 20:06:30 mythtv kernel: ivtv0 warning: IRQ: IVTV_IRQ_DEC_DMA_ERR
Jul 9 20:06:30 mythtv last message repeated 88 times
Jul 9 20:06:30 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var
Jul 9 20:06:30 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par
Jul 9 20:06:30 mythtv kernel: ivtv0 warning: IRQ: IVTV_IRQ_DEC_DMA_ERR
Jul 9 20:06:30 mythtv last message repeated 27 times
Jul 9 20:07:06 mythtv kernel: ivtv0-osd warning: Need to adjust to width 640 src_w 640 dst_w 692 src_x 0 dst_x 13
Jul 9 20:07:06 mythtv kernel: ivtv0-osd warning: Need to adjust to height 480 src_h 480 dst_h 480 src_y 0 dst_y 0
Jul 9 20:07:06 mythtv kernel: ivtv0-osd warning: Source video: Interlaced
Jul 9 20:07:06 mythtv kernel: ivtv0 warning: Enable video output
Jul 9 20:13:07 mythtv kernel: ivtv0-osd warning: Need to adjust to width 640 src_w 640 dst_w 206 src_x 0 dst_x 488
Jul 9 20:13:07 mythtv kernel: ivtv0-osd warning: Need to adjust to height 480 src_h 480 dst_h 148 src_y 0 dst_y 14
__________________________________________________

Daemon:
___________________________________________________

Jul 9 20:06:10 mythtv lircd-0.8.0pre4-pvr150[2982]: lircd(all) ready
Jul 9 20:06:11 mythtv mysqld_safe[3553]: started
Jul 9 20:06:11 mythtv mysqld[3556]: /usr/sbin/mysqld: ready for connections.
Jul 9 20:06:11 mythtv mysqld[3556]: Version: '4.0.22-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 Source distribution
Jul 9 20:06:12 mythtv /etc/mysql/debian-start[3573]: Checking for crashed MySQL tables.
Jul 9 20:06:27 mythtv ntpd[4440]: ntpd 4.2.0a@1:4.2.0a+stable-2-r Sun Jan 9 16:13:27 CET 2005 (1)
Jul 9 20:06:27 mythtv ntpd[4440]: precision = 4.000 usec
Jul 9 20:06:27 mythtv ntpd[4440]: Listening on interface wildcard, 0.0.0.0#123
Jul 9 20:06:27 mythtv ntpd[4440]: Listening on interface wildcard, ::#123
Jul 9 20:06:27 mythtv ntpd[4440]: Listening on interface lo, 127.0.0.1#123
Jul 9 20:06:27 mythtv ntpd[4440]: Listening on interface eth0, 192.168.1.101#123
Jul 9 20:06:27 mythtv ntpd[4440]: kernel time sync status 0040
Jul 9 20:06:27 mythtv ntpd[4440]: frequency initialized -13.205 PPM from /var/lib/ntp/ntp.drift
Jul 9 20:06:34 mythtv lircd-0.8.0pre4-pvr150[2982]: accepted new client on /dev/lircd
Jul 9 20:06:37 mythtv lircd-0.8.0pre4-pvr150[2982]: accepted new client on /dev/lircd
Jul 9 20:09:43 mythtv ntpd[4440]: synchronized to LOCAL(0), stratum 13
Jul 9 20:09:43 mythtv ntpd[4440]: kernel time sync disabled 0041
Jul 9 20:10:46 mythtv ntpd[4440]: synchronized to 216.52.237.153, stratum 2
Jul 9 20:28:04 mythtv ntpd[4440]: time reset -0.602801 s
Jul 9 20:28:04 mythtv ntpd[4440]: kernel time sync enabled 0001
Jul 9 20:32:22 mythtv ntpd[4440]: synchronized to LOCAL(0), stratum 13
__________________________________________________

X:
____________________________________________________

EE) IVTVDEV_TST(0): Framebuffer id from dev /dev/fb0is 0
(EE) IVTVDEV_TST(0): open /dev/video48 returned 5
(EE) IVTVDEV_TST(0): get_fb returned 0 fbid 0
(**) IVTVDEV_TST(0): Depth 24, (**) framebuffer bpp 32
(==) IVTVDEV_TST(0): RGB weight 888
(==) IVTVDEV_TST(0): Default visual is TrueColor
(==) IVTVDEV_TST(0): Using gamma correction (1.0, 1.0, 1.0)
(II) IVTVDEV_TST(0): Hardware: cx23415 TV out (vidmem: 1665k)
(**) IVTVDEV_TST(0): Option "ivtv" "/dev/fb0"
(II) IVTVDEV_TST(0): Checking Modes against framebuffer device...
(II) IVTVDEV_TST(0): mode "720x480" ok
(II) IVTVDEV_TST(0): Checking Modes against monitor...
(--) IVTVDEV_TST(0): Virtual size is 720x480 (pitch 720)
(**) IVTVDEV_TST(0): Mode "720x480": 34.6 MHz (scaled from 0.0 MHz), 37.2 kHz, 73.9 Hz
(II) IVTVDEV_TST(0): Modeline "720x480" 34.56 720 752 840 928 480 484 488 504 -hsync -vsync-vsync
(==) IVTVDEV_TST(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(**) IVTVDEV_TST(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu