Linux version 2.6.15-chw-2 (root@dev.mysettopbox.tv) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP PREEMPT Thu Jan 5 08:10:40 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
 BIOS-e820: 0000000027ff0000 - 0000000027ff8000 (ACPI data)
 BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
639MB LOWMEM available.
On node 0 totalpages: 163824
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 159728 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000fabb0
ACPI: RSDT (v001 AMIINT AMD_K7   0x00000010 MSFT 0x00000097) @ 0x27ff0000
ACPI: FADT (v001 AMIINT AMD_K7   0x00000011 MSFT 0x00000097) @ 0x27ff0030
ACPI: DSDT (v001 AMD75X IRONGATE 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x5008
Allocating PCI resources starting at 30000000 (gap: 28000000:d7ff0000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-off nomce
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01625000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 808.437 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 642820k/655296k available (3151k kernel code, 11992k reserved, 1029k data, 220k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1617.35 BogoMIPS (lpj=808679)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0080 (from 1e00)
CPU0: AMD Athlon(tm) Processor stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 121k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Device [ECP] status [000000aa]: functional but not present; setting present
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:00: ioport range 0xde00-0xde03 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: b000-bfff
  MEM window: ede00000-efefffff
  PREFETCH window: d5c00000-e5cfffff
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 5023, nTxLock = 40190
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xd8000000, mapped to 0xe8b80000, using 3750k, total 131072k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:e4d0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 45842 bytes,<6>...found (800x600, 21500 bytes, v3).
Console: switching to colour frame buffer device 75x24
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7409: IDE controller at PCI slot 0000:00:07.1
AMD7409: chipset revision 7
AMD7409: not 100% native mode: will probe irqs later
AMD7409: 0000:00:07.1 (rev 07) UDMA66 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: WDC AC26400R, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 12594960 sectors (6448 MB) w/512KiB Cache, CHS=13328/15/63, UDMA(66)
hda: cache flushes not supported
 hda: hda1 hda2
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  1224.000 MB/sec
   8regs_prefetch:  1088.000 MB/sec
   32regs    :   780.000 MB/sec
   32regs_prefetch:   776.000 MB/sec
   pII_mmx   :  2144.000 MB/sec
   p5_mmx    :  2844.000 MB/sec
raid5: using function: p5_mmx (2844.000 MB/sec)
raid6: int32x1    308 MB/s
raid6: int32x2    386 MB/s
raid6: int32x4    230 MB/s
raid6: int32x8    230 MB/s
raid6: mmxx1      671 MB/s
raid6: mmxx2     1167 MB/s
raid6: sse1x1     640 MB/s
raid6: sse1x2    1058 MB/s
raid6: using algorithm sse1x2 (1058 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
PCI0 UAR1  USB
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
input: AT Translated Set 2 keyboard as /class/input/input0
VFS: Mounted root (ext2 filesystem).
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Suspend2: Initrd lacks echo > /proc/suspend2/do_resume.
Freeing unused kernel memory: 220k freed
EXT3 FS on hda1, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:07.4[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:07.4: OHCI Host Controller
ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:07.4: irq 9, io mem 0xefffe000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
Real Time Clock Driver v1.12
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
ACPI: Power Button (CM) [PWRB]
ACPI: Thermal Zone [THRM] (30 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 10, latency: 64, mmio: 0xeddfe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tda9887 0-0043: chip found @ 0x86 (bt878 #0 [sw])
tuner 0-0060: Chip ID is not zero. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 0-0060: microtune: companycode=3cbf part=42 rev=2f
tuner 0-0060: microtune MT2050 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xe910ef00, 00:50:bf:50:40:bc, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
NET: Registered protocol family 17
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 10, latency: 64, memory: 0xeddff000
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
usbcore: registered new driver ttusb
usbcore: registered new driver ttusb-dec
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
lirc_dev: IR Remote Control driver registered, at major 61
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.4 (tagged release) loading
ivtv:  Linux version: 2.6.15-chw-2 SMP preempt 586 gcc-3.3
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv:  ====================  END INIT IVTV  ====================
cx2388x v4l2 driver version 0.0.5 loaded
input: PC Speaker as /class/input/input1
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AMD Irongate chipset
agpgart: AMD 751 chipset with NVidia GeForce detected. Forcing to 1X due to errata.
agpgart: AGP aperture is 64M @ 0xe8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7007 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7174  Tue Mar 22 06:44:39 PST 2005
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 1x mode
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 1x mode
sit0: Disabled Privacy Extensions
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
usb 1-1: new low speed USB device using ohci_hcd and address 2
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.4-1
ts: Compaq touchscreen protocol output