| LinHES Forums http://forum.linhes.org/ |
|
| Problem viewing low band (ch 2-6) with PVR15O --SOLVED http://forum.linhes.org/viewtopic.php?f=2&t=11090 |
Page 1 of 1 |
| Author: | sethloff [ Sun Aug 06, 2006 3:49 pm ] |
| Post subject: | Problem viewing low band (ch 2-6) with PVR15O --SOLVED |
Thanks in advance for everyones help. I have searched, but am unable to come up with much. After setting up Knoppmyth R5C7 on a Hauppauge 150 (I have the same problem on the MCE and non-mce versions, as I have tried both) I can view ALL channels, but ONLY channnels 2-6 (low band) are very fuzzy. If I hook the cable up to the TV, I can view ch 2-6 very clearly. Testing I have done: I put the 15O card in another computer and used the windows setup, and Ch. 2-6 are very clear. Tried my Hauppauge 350 in the Knoppmyth system with the exact same cables that show a clear picture on the (previously mentioned) windows system, and I have a very clear picture. (So it seems to be a 150 card problem. (This happens on both the 150MCE and non-mce cards) As mentioned, I have tried two seprate Hauppauge 15O cards and both have had the same fuzzy channels (2-6). Also, I have tried adjusting the frequency's, but that was no help. I have downloaded and installed Nvidia drivers 8762. and IVTV 0.4.6. I am using kernel 2.16. my system is a p4 1.8 hd 40 & 200 1g ram Thanks again for any help. SOLUTION: it appears the graphics card was the issue. I moved it to another PCI slot and the channels came in perfect. |
|
| Author: | Russ [ Thu Aug 17, 2006 7:01 pm ] |
| Post subject: | |
I bet it was your rf connection. Ch 2-6 are in a different frequency band and are the first to show snow/static when there's a bad connection. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|