LinHES Forums • View topic - Avermedia AVerTV GO 007 FM

Board index KnoppMyth Hardware

All times are UTC - 6 hours

Avermedia AVerTV GO 007 FM - No Audio

Page 1 of 1

[ 2 posts ]

Print view

Previous topic Next topic

Author

Message

chrisj

Post subject: Avermedia AVerTV GO 007 FM - No Audio

Posted: Fri Aug 18, 2006 9:05 pm

Joined: Tue Jan 17, 2006 7:34 am

Posts: 126

Location: Australia

I've just installed a second card into my system , a Avermedia AVerTV GO 007 FM
It seems to found during boot , and I can tune TV video on it ok , but can't get the audio to work.

Any hints ?

Code:

saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 21, latency: 32, mmio: 0xe1001000
saa7133[0]: subsystem: 1461:f31f, board: Avermedia AVerTV GO 007 FM [card=57,autodetected]
saa7133[0]: board init: gpio is 80658
input: saa7134 IR (Avermedia AVerTV GO as /class/input/input1
saa7133[0]: i2c eeprom 00: 61 14 1f f3 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner 2-004b: setting tuner address to 61
tuner 2-004b: tuner: type set to tda8290+75
saa7133[0]: registered device video1 [v4l2]
saa7133[0]: registered device vbi1
saa7133[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xe1001000 irq 21 registered as card -1

Code:

2006-08-19 13:01:32.070 adding: mythtv as a client (events: 0)
2006-08-19 13:01:32.079 TVRec(5): Changing from None to WatchingLiveTV
[mpeg4 @ 0xb73ba620]removing common factors from framerate
strange error flushing buffer ...
0: start_time: 5496.228 duration: 6.901
1: start_time: 5496.212 duration: 6.895
stream: start_time: 61069.027 duration: 76.847 bitrate=6472 kb/s
2006-08-19 13:02:03.142 AFD: Opened codec 0x80e41e0, id(MPEG2VIDEO) type(Video)
2006-08-19 13:02:03.981 AFD: Opened codec 0x80e4690, id(MP3) type(Audio)

Top

chrisj

Post subject:

Posted: Sun Aug 20, 2006 8:07 am

Joined: Tue Jan 17, 2006 7:34 am

Posts: 126

Location: Australia

Fixed !

The card will work out of the box .. the audio problam is simple to fix

It is set to mute by default.

To set it to be mute off you need to do the following

edit /etc/modutils/actions
add the following

Code:

post-install saa7134 /usr/bin/v4lctl -c /dev/video volume mute off

then run update-modules

if you card is not /dev/video or /dev/video0 then you will need to do this for the /dev/videoX for your card.

Top

Page 1 of 1

[ 2 posts ]

Board index KnoppMyth Hardware

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum