| LinHES Forums http://forum.linhes.org/ |
|
| R5C7 Hauppauge A415-HPG Unknown Keys? http://forum.linhes.org/viewtopic.php?f=2&t=11102 |
Page 1 of 1 |
| Author: | joerg [ Tue Aug 08, 2006 9:20 am ] |
| Post subject: | R5C7 Hauppauge A415-HPG Unknown Keys? |
Hi, i just upgraded my MythBox from R5A26 to R5C7 (something crashed my R5A26). Everything works fine (thanks to all!) except my remote. I am using a Hauppauge PVR 350 card with A415-HPG remote. While updating the system, the installer asks which remote i own. I've chosen the correct remote, but now i get different key events: I am getting the "correct" values, which are descriped as DOWN grayHauppauge (pressing the down button) an then (extremely often) i get unknown key. I do not know where to take a look at... maybe there is someone who also gets this events... |
|
| Author: | khrusher [ Tue Aug 08, 2006 2:22 pm ] |
| Post subject: | |
maybe you can record a new keymap file |
|
| Author: | spalVl [ Tue Aug 08, 2006 2:39 pm ] |
| Post subject: | |
Check this thread, I found some of the keys were dead in that remote and posted tried to improve remote overall. http://mysettopbox.tv/phpBB2/viewtopic.php?t=9926 Problem buttons Previous Channel, Menu, FFW, RRW, SKIP, REPLAY |
|
| Author: | joerg [ Tue Aug 08, 2006 4:23 pm ] |
| Post subject: | |
Thanks for the answer. But i do NOT have a problem with specific keys, i have got a problem wit ALL keys. By pressing a key, doesn't care which one, i get 4 different codes (2x2). Everytime 1 code for activating and the opposite, deactivating. Normaly there should not be another key event. In my case there are 2 more events, one for activating and one for deactivating. So by pressing a key i can get Event-Pair one or two... As a workaround... is it possible to define two (four) events for one key? |
|
| Author: | spalVl [ Tue Aug 08, 2006 5:30 pm ] |
| Post subject: | |
Quote: So by pressing a key i can get Event-Pair one or two...
As a workaround... is it possible to define two (four) events for one key? Is is possible to have 2 functions for 1 key defined in /home/mythtv/.mythtv/lircrc which is common for volume control in mythtv, with volume control in Xine as well. Sound like what you have going on is multiple key code definitions in /etc/lirc/lircd.conf That file maps IR codes to keynames. Like Khrusher said maybe regenerating a new lircd.conf file using irrecord. Or can peek at lircd.conf and see if key codes look duplicated. |
|
| Author: | joerg [ Wed Aug 09, 2006 3:20 pm ] |
| Post subject: | |
If there would be duplicate key codes, irw should show another button than the one i have pressed. So irw only shows "unknown key". It is not reproduceable, so pressing a key shows sometiimes the correct event and sometimes not. Maybe i can get a workaround by defining another remote in lircd.conf with the "new" key codes.. as another remote. Maybe this works.... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|