[quote="kevanf1"]First off, hello everybody. I've just found the forum after a Google search on simply Knoppmyth. I have a quick question. I have a Pinnacle 300i DVB tuner card. This card only comes with software for Win XP - 'oh, what a surprise  '. I've had it for over a year now and have been meaning to get it up and running using Linux. Ok, has anybody got this working successfully with Knoppmyth and are there any issues with it?
I shall be running it on a micro ATX board with a 1.8mhz Pentium processor with 512mb of RAM. I shall probably set the hard drive up as an LVM arrangement so that I can easily add to it in the future.
Any input would be most welcome.
Thank you for reading this post.
Kevan[/quote]
just installed knoppmyth and the pinnacle isn't working....
but as i can see from dmesg it is correctly found by bttv
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7134[0]: found at 0000:02:07.0, rev: 1, irq: 21, latency: 32, mmio: 0xee000000
saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
saa7134[0]: board init: gpio is c806000
saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: 0c 22 17 44 02 96 3d 0e ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: 00 30 8d 15 07 8f ff ff 74 7c ff ff ff ff ff ff
tuner 0-0060: chip found @ 0xc0 (saa7134[0])
tda9887 0-0043: chip found @ 0x86 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
|
