# Xorg X server configuration for HDTV
# by sTv

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
   RgbPath      "/usr/X11R6/lib/X11/rgb"
   ModulePath   "/usr/X11R6/lib/modules"
   FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
   FontPath     "/usr/X11R6/lib/X11/fonts/misc"
   FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
   FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
   FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
   FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
   FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
   FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
   FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
#   FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
#   FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
   FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
   FontPath     "/usr/share/fonts/ttf/western"
   FontPath     "/usr/share/fonts/ttf/decoratives"
   FontPath     "/usr/share/fonts/truetype"
   FontPath     "/usr/share/fonts/truetype/openoffice"
   FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
   FontPath     "/usr/share/fonts/latex-ttf-fonts"
   FontPath     "/usr/X11R6/lib/X11/fonts/defoma/CID"
   FontPath     "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
    Load  "ddc"  # ddc probing of monitor
#   Load  "GLcore"
   Load  "dbe"
   Load  "v4l"
   Load  "extmod"
   Load  "glx"
    Load  "bitmap" # bitmap-fonts
   Load  "speedo"
   Load  "type1"
   Load  "freetype"
   Load  "record"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier   "MonitorDVI"
        VendorName   "Samsung"
        ModelName    "42in-HP-S4253"
        HorizSync    30-50
        VertRefresh  59.94
        #VertRefresh  60.0
      Option "UseEDIDFreqs" "True"
      Option   "TVStandard" "NTSC-M"
        Option     "dpms"
      Option   "NoLogo" "1"
        # My 960x540p mode
        Mode "960x540p"
                DotClock 37.26
                HTimings 960 976 1008 1104
                VTimings 540 542 548 563
                Flags "+HSync" "+VSync"
        EndMode
        # My 880x480in540p mode
        Mode "in540p"
                DotClock 37.26
                HTimings 880 944 1048 1104
                VTimings 480 506 520 563
                Flags "+HSync" "+VSync"
        EndMode
        # My 1920x1080i mode
        Mode "1920x1080i"
                DotClock 74.52
                HTimings 1920 1952 2016 2208
                VTimings 1080 1084 1096 1126
                Flags "-HSync" "-VSync" "Interlace"
        EndMode
        # My 1760x960in1080i mode
        Mode "in1080i"
                DotClock 74.52
                HTimings 1760 1888 2096 2208
                VTimings 960 1012 1028 1126
                Flags "-HSync" "-VSync" "Interlace"
        EndMode
EndSection

Section "ServerFlags"
        Option "blank time" "0"
        Option "standby time" "0"
        Option "suspend time" "0"
        Option "off time" "0"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nvidia"
        VendorName  "Chaintech"
        BoardName   "GeForce FX 5200"
        #Option      "RenderAccel" "1"
        #Option      "NvAGP" "1"
        #Option      "NoDDC"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "MonitorDVI"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "960x540p" "1920x1080i"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection