| LinHES Forums http://forum.linhes.org/ |
|
| Problem with Winfast Expert Card http://forum.linhes.org/viewtopic.php?f=2&t=11903 |
Page 1 of 1 |
| Author: | nicom [ Fri Sep 29, 2006 8:50 pm ] |
| Post subject: | Problem with Winfast Expert Card |
I am attempting to run Knoppmyth R5C7 on an old machine which I know may struggle to support it. The computer is a Pentium 2 350 Mhz, 256 MB. and the tuner card is a Winfast 2000XP Expert. I have succesfully installed and run MythTV setup. I have followed Marcels excellent instructions on installing the drivers http://mysettopbox.tv/phpBB2/viewtopic.php?t=10687&highlight=marcels When I select Watch TV I get a blank screen. When I look at the logs /var/log/dmesg and /var/log/messages both indicate that the drivers are correctly installed with tuner=38 for Australia. Last part of /var/log/messages is Code: Sep 16 15:38:38 mythtv kernel: TV tuner 38 at 0x1fe, Radio tuner -1 at 0x1fe Sep 16 15:38:38 mythtv kernel: tuner 1-0060: All bytes are equal. It is not a TEA5767 Sep 16 15:38:38 mythtv kernel: tuner 1-0060: chip found @ 0xc0 (cx88[0]) Sep 16 15:38:38 mythtv kernel: tuner 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 16 15:38:38 mythtv kernel: tda9887 1-0043: chip found @ 0x86 (cx88[0]) Sep 16 15:38:38 mythtv kernel: cx88[0]: i2c scan: found device @ 0x86 [tda9887/cx22702] Sep 16 15:38:38 mythtv kernel: cx88[0]: i2c scan: found device @ 0xa0 [eeprom] Sep 16 15:38:38 mythtv kernel: cx88[0]: i2c scan: found device @ 0xc0 [tuner (analog)] Sep 16 15:38:38 mythtv kernel: cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01 Sep 16 15:38:39 mythtv kernel: input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input4 Sep 16 15:38:39 mythtv kernel: cx88[0]/0: found at 0000:00:0d.0, rev: 5, irq: 10, latency: 165, mmio: 0xd0000000 Sep 16 15:38:39 mythtv kernel: cx88[0]/0: registered device video0 [v4l2] Sep 16 15:38:39 mythtv kernel: cx88[0]/0: registered device vbi0 Sep 16 15:38:39 mythtv kernel: cx88[0]/0: registered device radio0 The only errors I can find in the logs is in /var/log/mythtv/mythbackend.log which gives Code: mpeg4 @ 0xb705d620]removing common factors from framerate
strange error flushing buffer ... 2006-09-16 17:59:45.213 TVRec(1): Changing from WatchingLiveTV to None 2006-09-16 17:59:45.635 Finished recording Melbourne Weekender: channel 1003 2006-09-16 18:14:04.036 MainServer::HandleAnnounce Monitor 2006-09-16 18:14:04.041 adding: mythtv as a client (events: 0) 2006-09-16 18:14:04.490 MainServer::HandleAnnounce Monitor 2006-09-16 18:14:04.497 adding: mythtv as a client (events: 1) 2006-09-16 18:14:21.468 MainServer::HandleAnnounce Playback 2006-09-16 18:14:21.476 adding: mythtv as a client (events: 0) 2006-09-16 18:14:21.489 TVRec(1): Changing from None to WatchingLiveTV 2006-09-16 18:14:21.591 Channel::GetCurrentChannelNum(): Failed to find Channel '' 2006-09-16 18:14:21.598 Channel(/dev/video0)::TuneTo(): Error, failed to find channel. 2006-09-16 18:14:21.601 TVRec(1) Error: Failed to set channel to 7. strange error flushing buffer ... 2006-09-16 18:14:43.789 TVRec(1): Changing from WatchingLiveTV to None 2006-09-16 18:14:44.674 Finished recording Seven News: channel 1003 This seems to indicate that it can't set the tuner to channel 7, my selected default. Can anyone shed any light on my problem? [/url] |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|