| LinHES Forums http://forum.linhes.org/ |
|
| Cant get Myth to change channels of Motorola DCT2224 http://forum.linhes.org/viewtopic.php?f=2&t=12098 |
Page 1 of 1 |
| Author: | biggeemac [ Tue Oct 10, 2006 5:59 pm ] |
| Post subject: | Cant get Myth to change channels of Motorola DCT2224 |
I have a fresh install of knoppmyth and everything appears to work except that when I change channels, it acts like its going to change the channel, but nothing happens. I'm using the Hauppagie PVR-150 that has the silver dog bone and the combo transmitter/receiver cord thingy that plugs into the back of the pvr-150. I also have an IR blaster plugged into the back of the Motorola cable bpx, although I dont know if this is necessary since the Motorola can already receive IR signals through the front panel(wouldnt be able to use a regular remote otherwise) This is the only thing separating me from MythTv euphoria !! Someone please help. Here is my lircd.conf : # # this config file was automatically generated # using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 # # contributed by Jens Leuschner <leuschner@gmx.net> # # brand: Hauppauge # model: # supported devices: WinTV primo; WinTV pci; WinTV radio # # This config file will work with both homebrew receivers and # original Hauppauge TV cards !!! # begin remote name blaster bits 32 flags RAW_CODES eps 0 aeps 0 plead 0 gap 333333 repeat_bit 0 begin raw_codes name 0_81_KEY_0 5308416 name 0_81_KEY_1 5308417 name 0_81_KEY_2 5308418 name 0_81_KEY_3 5308419 name 0_81_KEY_4 5308420 name 0_81_KEY_5 5308421 name 0_81_KEY_6 5308422 name 0_81_KEY_7 5308423 name 0_81_KEY_8 5308424 name 0_81_KEY_9 5308425 name 0_81_KEY_POWER 5308426 name 0_81_KEY_CH_UP 5308431 name 0_81_KEY_CH_DOWN 5308432 name 0_81_KEY_MENU 5308463 name 0_81_KEY_MUP 5308464 name 0_81_KEY_MDOWN 5308465 name 0_81_KEY_MLEFT 5308466 name 0_81_KEY_MRIGHT 5308467 name 1_81_KEY_0 2152792064 name 1_81_KEY_1 2152792065 name 1_81_KEY_2 2152792066 name 1_81_KEY_3 2152792067 name 1_81_KEY_4 2152792068 name 1_81_KEY_5 2152792069 name 1_81_KEY_6 2152792070 name 1_81_KEY_7 2152792071 name 1_81_KEY_8 2152792072 name 1_81_KEY_9 2152792073 name 1_81_KEY_POWER 2152792074 name 1_81_KEY_CH_UP 2152792079 name 1_81_KEY_CH_DOWN 2152792080 end raw_codes end remote begin remote name Hauppauge bits 13 flags SHIFT_ENC eps 30 aeps 100 one 950 830 zero 950 830 plead 960 gap 89584 repeat_bit 2 begin codes TV 0x000000000000100F RADIO 0x000000000000100C FULL_SCREEN 0x000000000000102E CH+ 0x0000000000001020 CH- 0x0000000000001021 VOL- 0x0000000000001011 VOL+ 0x0000000000001010 MUTE 0x000000000000100D SOURCE 0x0000000000001022 1 0x0000000000001001 2 0x0000000000001002 3 0x0000000000001003 4 0x0000000000001004 5 0x0000000000001005 6 0x0000000000001006 7 0x0000000000001007 8 0x0000000000001008 9 0x0000000000001009 0 0x0000000000001000 RESERVED 0x000000000000101E MINIMIZE 0x0000000000001026 end codes end remote # # this config file was automatically generated # using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 # # contributed by # # brand: Hauppauge # model no. of remote control: # devices being controlled by this remote: PVR 2/350 # begin remote name hauppauge_pvr bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Power 0x00000000000017FD Go 0x00000000000017FB 1 0x00000000000017C1 2 0x00000000000017C2 3 0x00000000000017C3 4 0x00000000000017C4 5 0x00000000000017C5 6 0x00000000000017C6 7 0x00000000000017C7 8 0x00000000000017C8 9 0x00000000000017C9 Back/Exit 0x00000000000017DF 0 0x00000000000017C0 Menu 0x00000000000017CD Red 0x00000000000017CB Green 0x00000000000017EE Yellow 0x00000000000017F8 Blue 0x00000000000017E9 Ch+ 0x00000000000017E0 Ch- 0x00000000000017E1 Vol- 0x00000000000017D1 Vol+ 0x00000000000017D0 Ok 0x00000000000017E5 Mute 0x00000000000017CF Blank 0x00000000000017CC Full 0x00000000000017FC Rewind 0x00000000000017F2 Play 0x00000000000017F5 Forward 0x00000000000017F4 Record 0x00000000000017F7 Stop 0x00000000000017F6 Pause 0x00000000000017F0 Replay 0x00000000000017E4 Skip 0x00000000000017DE end codes end remote # # this config file was automatically generated # using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 # # contributed by # # brand: Hauppauge 350 # Created: G.J. Werler (The Netherlands) # Project: Mythtv Fedora Pundit-R www.mythtvportal.com # Date: 2004/11/28 # model no. of remote control: Hauppauge A415-HPG # devices being controlled by this remote: PVR-350 # begin remote name Hauppauge_350 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Go 0x00000000000017BB Power 0x00000000000017BD TV 0x000000000000179C Videos 0x0000000000001798 Music 0x0000000000001799 Pictures 0x000000000000179A Guide 0x000000000000179B Radio 0x000000000000178C Up 0x0000000000001794 Left 0x0000000000001796 Right 0x0000000000001797 Down 0x0000000000001795 OK 0x00000000000017A5 Back/Exit 0x000000000000179F Menu/i 0x000000000000178D Vol+ 0x0000000000001790 Vol- 0x0000000000001791 Prev.Ch 0x0000000000001792 Mute 0x000000000000178F Ch+ 0x00000000000017A0 Ch- 0x00000000000017A1 Record 0x00000000000017B7 Stop 0x00000000000017B6 Rewind 0x00000000000017B2 Play 0x00000000000017B5 Forward 0x00000000000017B4 Replay/SkipBackward 0x00000000000017A4 Pause 0x00000000000017B0 SkipForward 0x000000000000179E 1 0x0000000000001781 2 0x0000000000001782 3 0x0000000000001783 4 0x0000000000001784 5 0x0000000000001785 6 0x0000000000001786 7 0x0000000000001787 8 0x0000000000001788 9 0x0000000000001789 Asterix 0x000000000000178A 0 0x0000000000001780 # 0x000000000000178E Red 0x000000000000178B Green 0x00000000000017AE Yellow 0x00000000000017B8 Blue 0x00000000000017A9 end codes end remote Also, I did a cat /var/log/mythtv/mythbackend.log and niticed a couple of entries that might be important: /usr/bin/irsend: could not connect to host /usr/bin/irsend: No such file or directory |
|
| Author: | biggeemac [ Tue Oct 10, 2006 9:42 pm ] |
| Post subject: | |
OK, made some progress. I tried the send_power_new script and my IR blaster started blinking. I'm not sure what this means. I tried this command: ./channel_change.sh 100 .... and got the following: /usr/bin/irsend: command failed: SEND_ONCE blaster 1 /usr/bin/irsend: unknown command: "1" Not sure what this means, but im guessing that the script is somehow passing a value of 1 which irsend does not recognize Referencing the lircd.conf file, i tried manually passing a command to irsend with the following command: root@mythtv:/etc/irblaster# irsend SEND_ONCE blaster 0_80_KEY_CH_DOWN ... and once again, the irblaster lit up, but the channel did not change on my receiver. Still waiting for someone to chime in on this. |
|
| Author: | biggeemac [ Thu Oct 12, 2006 8:01 pm ] |
| Post subject: | |
anyone?? |
|
| Author: | darkyoda [ Tue Oct 17, 2006 12:55 am ] |
| Post subject: | |
I have the same cable box. And I've JUST got done and managed to get what seems to be everything up and running... except all the channels are fuzz(no picutre at all) and my DCT2244 isn't changing channels. We'll see what I manage to get out of playing with it some more. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|