| LinHES Forums http://forum.linhes.org/ |
|
| LX8100 Based tier 1 configuration, please review! http://forum.linhes.org/viewtopic.php?f=2&t=12218 |
Page 1 of 1 |
| Author: | efes [ Wed Oct 18, 2006 11:48 pm ] |
| Post subject: | LX8100 Based tier 1 configuration, please review! |
Hi, I am trying to set up a Tier 1 or easy Tier 2 configuration. After much reading, i have compiled the following hardware shopping list for the project, and would appreciate your feedback before i place an order: LixSystems LX8100 Barebones system - Asus M2NPV-VM Board - onboard nVidia GeForce 6150 / nForce 430 Add-Ons: - PVR-500 - Seagate Baracudea 7200 250 GB Pata HD - AMD AM2 3000+ (low power consumption) - Zalman AM2 heatsink - 512MB 240 pin DDR-2 - Mad Dog 6-in-1 DVD/CD - Wireless PS/2 KB/Mouse - ATI Remote Wonder Are there any problematic components in this system? I understood a similar system (lx8100) was donated to KnappMyth, but i cannot find any reviews regarding compatibility. Thanks!! |
|
| Author: | turpie [ Thu Oct 19, 2006 12:10 am ] |
| Post subject: | |
I have this motherboard and to get sound working with R5D1 I needed to update alsa to 1.0.13. It wasn't hard, I just followed instructions elsewhere in the forum. I assume as Cecil (the main Knoppmyth developer) has one of these then it will be very well supported in the future. |
|
| Author: | spideyk21 [ Thu Oct 19, 2006 8:30 am ] |
| Post subject: | |
Quote: LixSystems LX8100 Barebones system
- Asus M2NPV-VM Board - onboard nVidia GeForce 6150 / nForce 430 Add-Ons: - PVR-500 - Seagate Baracudea 7200 250 GB Pata HD - AMD AM2 3000+ (low power consumption) - Zalman AM2 heatsink - 512MB 240 pin DDR-2 - Mad Dog 6-in-1 DVD/CD - Wireless PS/2 KB/Mouse - ATI Remote Wonder That system is just about Identical to the system I am in the works of building. Keep me posted on how the whole setup goes. |
|
| Author: | craigtv [ Thu Oct 19, 2006 11:24 am ] |
| Post subject: | Re: LX8100 Based tier 1 configuration, please review! |
efes wrote: Hi,
I am trying to set up a Tier 1 or easy Tier 2 configuration. After much reading, i have compiled the following hardware shopping list for the project, and would appreciate your feedback before i place an order: LixSystems LX8100 Barebones system - Asus M2NPV-VM Board - onboard nVidia GeForce 6150 / nForce 430 Add-Ons: - PVR-500 - Seagate Baracudea 7200 250 GB Pata HD - AMD AM2 3000+ (low power consumption) - Zalman AM2 heatsink - 512MB 240 pin DDR-2 - Mad Dog 6-in-1 DVD/CD - Wireless PS/2 KB/Mouse - ATI Remote Wonder Are there any problematic components in this system? I understood a similar system (lx8100) was donated to KnappMyth, but i cannot find any reviews regarding compatibility. Thanks!! I too am putting together a system based on the Asus M2NPV-VM Board. I'll update when I get a little further along. I looked at the LX8100, but I believe it only takes Half-Height PCI cards. I think that rules out the PVR-500, unless there's a model I'm not aware of. I know there is a low profile PVR-150, so two of those would be an option. |
|
| Author: | spideyk21 [ Thu Oct 19, 2006 12:17 pm ] |
| Post subject: | |
My Case is the CoolerMaster CM 620. I will be using the PVR-500 with a flexible riser card since the PCI slots are horizontal (low profile case). Coller Master CM 260 7cm Riser Card |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|