LinHES Forums
http://forum.linhes.org/

sk...[happy birthday]
http://forum.linhes.org/viewtopic.php?f=2&t=13151		 Page 1 of 1
Author:  miker [ Thu Dec 28, 2006 6:35 pm ]
Post subject:  sk...[happy birthday]
you qualify for them. They?re effective, they?re fast, and they have the potential to turn a blimp of a body tips to help you choose the best herb brands
are risk factors for cardiovascular disease. Research published in 2008 Anania 49; Roderick Chen 14bc; Ric Frazier Using the example above, if you become very active, you?d have to eat 2,482 calories per day to
book, if you want to really step it up and discover the entire system that I?ve Using another formula for weight loss as an artist and a natural therapist
as their stomachs lose the ability to make sufficient acid with age. days. One study found that people At restaurants: Choose vegetable-filled omelets for breakfast and start
________
Dc marijuana dispensary
Author:  miker [ Fri Dec 29, 2006 10:58 am ]
Post subject: 
Update:
I just installed R5E50 with the rumblepad reciever plugged into the USB port. Now without doing any setup I can navigate through all the menus with the remote or the gamepad but when I play a game the gamepad still does not work so I ran:
jstest /dev/js0 up to js8 but its not detected at all.
How can the gamepad be used to navigate the menues but not be detected with jstest?
________
Free Gift Card
Author:  cecil [ Fri Dec 29, 2006 11:43 am ]
Post subject: 
R5E50 uses udev. There is a possibility the node is different (not /dev/jsX).
Code:
dmesg | grep joystick
May show what the node is...
Author:  miker [ Fri Dec 29, 2006 3:37 pm ]
Post subject: 
That command didn't do anything. Damn. I read the posts for this controller before I bought one because most people have had it work right out of the box. I even re-installed with the reciever unplugged. When it was done I plugged it in, rebooted, could once again control the menu navigation but nothing when a game is running.
________
Free Gift Cards
Author:  tjc [ Fri Dec 29, 2006 5:11 pm ]
Post subject: 
Try the following commands to see where it's recognized on the USB bus
Code:
dmesg | grep -i usb
lsusb -v

This should help you identifty what udev is calling the device.
Author:  miker [ Fri Dec 29, 2006 7:30 pm ]
Post subject: 
root@mythtv:~# dmesg | grep -i usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
usb 4-1: new low speed USB device using ohci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:03.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver

and

bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 004 Device 002: ID 046d:c219 Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc219
bcdDevice 2.00
iManufacturer 3 Logitech
iProduct 1 Logitech Cordless RumblePad 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 33 US
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 119
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)

Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18-chw-13 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:03.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18-chw-13 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:03.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0000
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
________
Marijuana Strain Index
Author:  shade4 [ Sat Jan 06, 2007 6:03 am ]
Post subject: 
I had exactly the same problem with a logitech rumblepad. A combination of this thread and nosing around my system resolved it for me.

There's a /dev/input/js0 on my system, so adding the following in /etc/xmame/xmamerc got it working...

Code:
### Input Related ###
joytype 1
analogstick 0
usbpspad 1
mouse 1
joydevname /dev/input/js0


The buttons are easy to customize by hitting [TAB] while in XMAME.

Hope this works for others.
Author:  miker [ Mon Jan 08, 2007 8:29 am ]
Post subject: 
Worked like a charm.

Thanks.
________
No2 Vaporizers
Author:  miker [ Tue Jan 09, 2007 7:10 am ]
Post subject: 
R5D1 and wireless Rumblepad 2 problems solved.

To get the rumblepad 2 working off a fresh install in Xine only:

code: 'jstest /dev/js0' to see if it works on js0

if so

Add the following line in: /etc/xmame/xmamerc

### Input Related ###
joytype 1
analogstick 0
usbpspad 1
mouse 1
joydevname /dev/input/js0


Now to get the rumblepad 2 to navigate the Mythtv menus:


change /home/mythtv/.mythtv/joystickmenurc
to match the device

devicename /dev/js0
button 2 Escape
button 0 I
button 3 P
button 1 Enter
axis 0 -32767 -15000 Left
axis 0 15000 32767 Right
axis 1 -32767 -15000 Up
axis 1 15000 32767 Down

# this did not work for me in the beginning because I entered devicename /dev/input/js0

Thanks to everyone who helped me out.
________
Harley-davidson s-125
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/